ODSForm作业指导书样表(一种是传统格式,一种是可视化格式)

1、VISUAL OPERATION DESCRIPTION SHEET可视化作业指导书ENGINEERINGDEPARTMENT工艺室Approval: QUALITY 质量部批准人Approval: MANUFACTURING 制造部批准人DESCRIPTION:描述Visual Aid No: VA0可视化指导书文件编号：VA001BE91 SAB FIT SAB MODULE TO FSB FRAMEIssued b编制：T.BRIDLEIssue Date:编制日期1999-10-27Models:BE91JOB ROTATION工作轮换ROTATE EVERY 2 HOURS 2H轮换

2、1次Reviewed by审核:Revision Date:神恶化日期1999-10-27Customer:FORD用户福特Revision Level:版本1Operation Number 操作号325,000MOD1-Fit Frame to jig and press2 gree n start butt ons together this will lock the frame in the mach ine1.将产品放到夹具上，双手同 时按绿色启动按钮，固定产品 到夹具上2-Take SAB Module and fit Liner to module2取出SAB模块，安装内衬到模

3、 块上1-'SEAT LOCK' Green light will come on if OK Green light will flash if operation is NOT OK如图示，无异常时，“ SEATLOCK绿色指示灯保持常亮，如闪3-Fit SAB module to outboard side of FSB3.安装SAB模块到FSB的外 侧4-Fit a nd Torque 2 M6 nuts to5.4 +/- .9Nm4.参数设定：调整M6螺母的 紧固扭矩为5.4 +/- .9Nm3-'Module and Liner located'

4、and 'Module Scanned' Green light will come on if OKGreen light will flash if operation isNOT OK无异常时，图中指示两灯保 持绿色常亮，如闪烁时，则存在异常4-'Nut(s) Torqued' Green light will come on if OKGree n light will flash if operati on is NOT OK无异常时，图中指示” 扭矩“保持绿色常亮，如闪烁时, 则存在异常5-Fit cable clip onto FSB frame,

5、 prin ter will Automatically print a copy Barcode label5.安装线缆夹到FSB框架 上，打印机自动打印副 本条形码标签6-Take Barcode label from prin ter and place on side Airbag cable n ear to plug place completed FSB frame in correct buffer5.撕下条形码并粘帖到靠近 插头位置的气囊线缆附近， 并将FSB放在正确的托架上5-'Cable Routed'and 'Label Prin ted' Green light will come on if OKGree n light will flash if operati on is NOT OK无异常时，图中所示”电缆位置 “和”标签打印“指示灯保持绿 色常亮，如闪烁时，则存在异常5SHEALTH & SAFETY安全及健康TPM全员生产维修KEEP AREA CLEAN AND TID Y THROUGHOUT THE DAY保持区域内的清洁和整齐SAFETY GLASSES