欧洲金属材料牌号标准

1、编号中文名称英文名称CR 10316-2001低合金钢的光辐射分析（常规法） 发射光谱法的标准常规法制定指南Optical emission analysis of low alloy steels (routine method) - Guidelines for the preparation of standard routine method for optical emission spectrometryCR 12471-2002镍从直接和长期接触皮肤的物品的合金和镀层中释放的屏蔽试验Screening tests for nickel release from alloys an

2、d coatings in items that come into direct and prolonged contact with the skinCR 12776-1997铜和铜合金 材料号分配和材料登记的规定和程序Copper and copper alloys - Provisions and procedures for the allocation of material numbers and registration of materialsCR 13388-1998铜和铜合金 组分和产品一览表Copper and copper alloys - Compendium of

3、 compositions and productsEN 10016-1-1994拉制和/或冷轧用非合金钢棒第1部分：一般要求Non-alloy steel rod for drawing and/or cold rolling - Part 1: General requirementsEN 10016-2-1994拉制和/或冷轧用非合金钢棒第2部分：一般用钢棒的特殊要求Non-alloy steel rod for drawing and/or cold rolling - Part 2: Specific requirements for general purposes rodEN 1

4、0016-3-1994拉制和/或冷轧用非合金钢棒第3部分：沸腾和沸腾代用低碳钢棒的特殊要求Non-alloy steel rod for drawing and/or cold rolling - Part 3: Specific requirements for rimmed and rimmed substitute low carbon steel rodEN 10016-4-1994拉制和/或冷轧用非合金钢棒第4部分：专用棒材的特殊要求Non-alloy steel rod for drawing and/or cold rolling - Part 4: Specific requi

5、rements for rod for special applicationsEN 10025-1993热轧非合金结构钢制品交货技术条件Hot rolled products of non-alloy structural steels; technical delivery conditions (includes amendment A1:1993)EN 10028-2-2003压力用途的钢板制品第2部分：具有规定的耐高温性能的非合金钢和合金钢Flat products made of steels for pressure purposes - Part 2: Non-alloy an

6、d alloy steels with specified elevated temperature propertiesEN 10028-4-2003压力用途的钢板制品第4部分：具有低温特性的镍合金钢Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature propertiesEN 10051-1997+A1-1997非合金钢和合金钢连续热轧钢板材、薄板和带材规范尺寸和形状公差Continuously hot-rolled un

7、coated plate, sheet and strip of non-alloy and alloy steels - Tolerances on dimensions and shape (includes amendment A1:1997)EN 10083-2-1996+A1-1996淬火钢和回火钢第2部分：非合金级钢交货技术条件Quenched and tempered steels - Part 2: Technical delivery conditions for unalloyed quality steels (includes Amendment A1:1996)EN

8、10090-1998内燃机阀门用钢和合金Valve steels and alloys for internal combustion enginesEN 10095-1999耐热钢和镍合金Heat resisting steels and nickel alloysEN 1011-4-2000焊接 金属材料焊接的推荐规范 第4部分：铝和铝合金的电弧焊接Welding - Recommendations for welding of metallic materials - Part 4: Arc welding of aluminium and aluminium alloysEN 1012

9、6-1995半成品交货的冷轧非合金钢电工钢薄板和钢带Cold rolled electrical non-alloyed steel sheet and strip delivered in the semi-processed stateEN 10165-1995半成品交货的冷轧电工合金钢制薄板和带材Cold rolled electrical alloyed steel sheet and strip delivered in the semi-processed stateEN 10210-1-1994非合金及细晶粒结构钢的热轧结构空心型材交货技术条件Hot finished struc

10、tural hollow sections of non-alloy and fine grain structural steels; part 1: technical delivery requirementsEN 10210-2-1997非合金及细晶粒结构钢的热轧结构空心型材第2部分：公差、尺寸和截面特性Hot finished structural hollow sections of non-alloy and fine grain structural steels - Part 2: Tolerances, dimensions and sectional properties

11、EN 10216-1-2002压力用途的无缝钢管交货技术条件第1部分：有规定室温特性的非合金钢管Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties / Note: To be amended by EN 10216-1/prA1 (2003-07).EN 10216-2-2002压力用途的无缝钢管交货技术条件第2部分：有规定高温特性的非合金及合金钢管

12、Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties / Note: To be amended by EN 10216-2/prA1 (2003-07).EN 10216-3-2002压力用途的无缝钢管交货技术条件第3部分：合金细晶粒钢管Seamless steel tubes for pressure purposes

13、- Technical delivery conditions - Part 3: Alloy fine grain steel tubes / Note: To be amended by EN 10216-3/prA1 (2003-07).EN 10216-4-2002压力用途的无缝钢管交货技术条件第4部分：有规定低温特性的非合金及合金钢管Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Non-alloy and alloy steel tubes with speci

14、fied low temperature properties / Note: To be amended by EN 10216-4/prA1 (2003-07).EN 10217-1-2002压力用途的焊接钢管交货技术条件第1部分：有规定室温特性的非合金钢管Welded steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature propertiesEN 10217-2-2002压力用途的焊接

15、钢管交货技术条件第2部分：有规定高温特性的电焊非合金及合金钢管Welded steel tubes for pressure purposes - Technical delivery conditions - Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature propertiesEN 10217-3-2002压力用途的焊接钢管交货技术条件第3部分：合金细晶粒钢管Welded steel tubes for pressure purposes - Technic

16、al delivery conditions - Part 3: Alloy fine grain steel tubesEN 10217-4-2002压力用途的焊接钢管交货技术条件第4部分：有规定低温特性的电焊非合金钢管Welded steel tubes for pressure purposes - Technical delivery conditions - Part 4: Electric welded non-alloy steel tubes with specified low temperature propertiesEN 10217-5-2002压力用途的焊接钢管交货技

17、术条件第5部分：有规定高温特性的埋弧焊非合金及合金钢管Welded steel tubes for pressure purposes - Technical delivery conditions - Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature propertiesEN 10217-6-2002压力用途的焊接钢管交货技术条件第6部分：有规定低温特性的埋弧焊非合金钢管Welded steel tubes for pressure purposes

18、 - Technical delivery conditions - Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature propertiesEN 10219-1-1997冷成型细晶粒钢和非合金钢的焊接结构空心型材第1部分：交货技术要求Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 1: Technical delivery requirementsEN 1

19、0219-2-1997冷成型细晶粒钢和非合金钢的焊接结构空心型材第2部分：公差、尺寸和截面特性Cold formed welded structural hollow sections of non-alloy and fine grain steels - Part 2: Tolerances, dimensions and sectional propertiesEN 10223-1-1997栅栏用钢丝和钢丝制品第1部分：镀锌和镀锌合金的有刺钢丝Steel wire and wire products for fences - Part 1: Zinc and zinc-alloy coa

20、ted steel barbed wireEN 10224-2002输送液体（包括人类生活用水）用的非合金钢管和管件交货技术条件Non-alloy steel tubes and fittings for the conveyance of aqueous liquids including water for human consumption - Technical delivery conditionsEN 10244-2-2001钢丝和钢丝制品钢丝上的非黑色金属外层第2部分：锌或锌合金镀层Steel wire and wire products - Non-ferrous metall

21、ic coatings on steel wire - Part 2: Zinc or zinc alloy coatingsEN 10248-1-1995非合金钢制热轧板堆第1部分：交货技术条件Hot rolled sheet piling of non alloy steels - Part 1: Technical delivery conditionsEN 10248-2-1995非合金钢制热轧板堆第2部分：尺寸和形状公差Hot rolled sheet piling of non alloy steels - Part 2: Tolerances on shape and dimen

22、sionsEN 10249-1-1995非合金钢制冷成型板堆第1部分：交货技术条件Cold formed sheet piling of non alloy steels - Part 1: Technical delivery conditionsEN 10249-2-1995非合金钢制冷成型板堆第2部分：尺寸和形状公差Cold formed sheet piling of non alloy steels - Part 2: Tolerances on shape and dimensionsEN 10250-2-1999一般工程用途的敞口钢模锻件第2部分：非合金钢和特殊钢Open die

23、 steel forgings for general engineering purposes - Part 2: Non-alloy quality and special steelsEN 10250-3-1999一般工程用途的敞口钢模锻件第3部分：合金特殊钢Open die steel forgings for general engineering purposes - Part 3: Alloy special steelsEN 10257-1-1998动力电缆或通信电缆铠甲用镀锌或锌合金的非合金钢电线第1部分：地面电缆Zinc or zinc alloy coated non-a

24、lloy steel wire for armouring either power cables or telecommunication cables - Part 1: Land cablesEN 10257-2-1998动力电缆或通信电缆铠甲用镀锌或锌合金的非合金钢电线第2部分：海底电缆Zinc or zinc alloy coated non-alloy steel wire for armouring either power cables or telecommunication cables - Part 2: Submarine cablesEN 10264-2-2002钢丝

25、和钢丝制品绳用钢丝第2部分：一般用途绳用冷拔非合金钢丝Steel wire and wire products - Steel wire for ropes - Part 2: Cold drawn non alloy steel wire for ropes for general applicationsEN 10264-3-2002钢丝和钢丝制品绳用钢丝第3部分：重载用途圆形和成形非合金钢丝Steel wire and wire products - Steel wire for ropes - Part 3: Round and shaped non alloyed steel wir

26、e for high duty applicationsEN 10268-1998冷成形用高屈服强度微合金钢的冷轧扁钢材交货一般条件Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditionsEN 10269-1999规定高温和/或低温性能的紧固件用钢及镍合金Steels and nickel alloys for fasteners with specified elevated and/or low tempe

27、rature propertiesEN 10296-1-2003机械和一般工程用途的焊接圆形钢管交货技术条件第1部分：非合金钢管和合金钢管Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubesEN 10297-1-2003机械和一般工程用途的无缝圆形钢管交货技术条件第1部分：非合金钢管和合金钢管Seamless circular steel tubes

28、for mechanical and general engineering purposes - Technical delivery conditions - Part 1: Non-alloy and alloy steel tubesEN 10302-2002抗蠕变钢、镍和钴合金Creep resisting steels, nickel and cobalt alloysEN 1057-1996铜和铜合金 在卫生和加热器中输送水和气体用无缝圆铜管Copper and copper alloys - Seamless, round copper tubes for water and

29、gas in sanitary and heating applicationsEN 1092-3-2003法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第3部分：铜合金法兰Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories PN designated - Part 3: Copper alloy flangesEN 1092-4-2002法兰及其连接 按PN标注的管、阀门、配件及其附件用圆形法兰 第4部分：铝合金法兰Flanges and their jo

30、ints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flangesEN 1172-1996铜和铜合金 建筑用薄板和带材Copper and copper alloys - Sheet and strip for building purposesEN 1173-1995铜和铜合金 原料条件或回火名称Copper and copper alloys - Material condition or temper designation

31、EN 1179-2003锌和锌合金 初级锌Zinc and zinc alloys - Primary zincEN 12019-1997锌和锌合金光学发射分光光度测定法Zinc and zinc alloys - Optical emission spectrometric analysisEN 12020-1-2001铝和铝合金合金EN AW-6060和EN AW-6063的精密压制型材第1部分：检验与交货技术条件Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN

32、AW-6063 - Part 1: Technical conditions for inspection and deliveryEN 12020-2-2001铝和铝合金合金EN AW-6060和EN AW-6063的精密压制型材第2部分：尺寸与形状公差Aluminium and aluminium alloys - Extruded precision profiles in alloys EN AW-6060 and EN AW-6063 - Part 2: Tolerances on dimensions and formEN 12060-1997锌和锌合金取样方法规范Zinc and

33、 zinc alloys - Method of sampling - SpecificationsEN 1213-1999建筑物阀门 建筑物内便携式供水用的铜合金断流阀 试验和要求Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirementsEN 12163-1998铜和铜合金一般用途的棒材Copper and copper alloys - Rod for general purposesEN 12164-1998+A1-2000铜和铜合金供快速

34、切削用的棒材Copper and copper alloys - Rod for free machining purposesEN 12165-1998铜和铜合金已加工和未加工的锻坯Copper and copper alloys - Wrought and unwrought forging stockEN 12166-1998铜和铜合金一般用途的线材Copper and copper alloys - Wire for general purposesEN 12167-1998铜及铜合金一般用途的型材和扁棒材Copper and copper alloys - Profiles and

35、rectangular bar for general purposesEN 12168-1998+A1-2000铜和铜合金用于非加工目的的空心棒材Copper and copper alloys - Hollow rod for free machining purposesEN 12258-1-1998铝和铝合金术语和定义第1部分：通用术语Aluminium and aluminium alloys - Terms and definitions - Part 1: General termsEN 12258-3-2003铝和铝合金术语和定义第3部分：废料Aluminium and alu

36、minium alloys - Terms and definitions - Part 3: ScrapEN 12288-2003工业用阀 铜合金闸阀Industrial valves - Copper alloy gate valvesEN 12373-1-2001铝和铝合金阳极氧化第1部分：铝上装饰和保护阳极氧化膜的测定方法Aluminium and aluminium alloys - Anodizing - Part 1: Method for specifying decorative and protective anodic oxidation coatings on alum

37、iniumEN 12373-10-1998铝和铝合金阳极氧化第10部分：用磨擦喷射试验机测定阳极氧化膜的平均比耐磨性Aluminium and aluminium alloys - Anodizing - Part 10: Measurement of mean specific abrasion resistance of anodic oxidation coatings using an abrasive jet test apparatusEN 12373-11-2000铝和铝合金阳极氧化第11部分：20°、45°、60°或85°角处测量阳极氧化

38、膜在的镜面反射率和镜面光泽度Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85?国际标准分类号：25.220.20 77.120.10英文标准名称：Aluminium and aluminium alloys - Anodizing - Part 11: Measurement of specular reflec

39、tance and specular gloss of anodic oxidation coatings at angles of 20? 45? 60?or 85?EN 12373-12-2000铝和铝合金阳极氧化 第12部分：用积分球仪测量铝表面的反射特性Aluminium and aluminium alloys - Anodizing - Part 12: Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instrumentsEN 12373-13-20

40、00铝和铝合金阳极氧化 第13部分：用测角光度仪或滤色测角光度仪测量铝表面的反射特性Aluminium and aluminium alloys - Anodizing - Part 13: Measurement of reflectance characteristics of aluminium surfaces using a goniophotometer or an abridged goniophotometerEN 12373-14-2000铝和铝合金阳极氧化 第14部分：阳极氧化膜成象清晰度的目测座标比例尺法Aluminium and aluminium alloys - A

41、nodizing - Part 14: Visual determination of image clarity of anodic oxidation coatings - Chart scale methodEN 12373-15-2000铝和铝合金阳极氧化 第15部分：阳极氧化膜抗形变破裂性的评定Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformationEN 12373-16-2

42、001铝和铝合金阳极氧化 第16部分：薄阳极氧化膜的连续性检验硫酸铜试验Aluminium and aluminium alloys - Anodizing - Part 16: Check of continuity of thin anodic oxdation coatings; Copper sulfate testEN 12373-17-2001铝和铝合金阳极氧化 第17部分：电击穿电压的测定Aluminium and aluminium alloys - Anodizing - Part 17: Determination of electric breakdown potenti

43、alEN 12373-18-2001铝和铝合金阳极氧化 第18部分：点蚀评定铝用检定系统图表法Aluminium and aluminium alloys - Anodizing - Part 18: Rating system for the evaluation of pitting corrosion; Chart methodEN 12373-19-2001铝和铝合金阳极氧化 第19部分：点蚀评定铝用检定系统网格法Aluminium and aluminium alloys - Anodizing - Part 19: Rating system for the evaluation

44、of pitting corrosion; Grid methodEN 12373-2-1998铝和铝合金阳极氧化第2部分：阳极氧化膜单位面积质量（表面密度）的测定重量分析法Aluminium and aluminium alloys - Anodizing - Part 2: Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric methodEN 12373-3-1998铝和铝合金阳极氧化第3部分：阳极氧化膜厚度的测定分束显微镜无损测量Aluminium

45、 and aluminium alloys - Anodizing - Part 3: Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscopeEN 12373-4-1998铝和铝合金阳极氧化第4部分：通过事先经酸处理的染斑试验估计封闭后 阳极氧化膜吸收能力的损失Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive

46、power of anodic oxidation coatings after sealing by dye spot test with prior acid treatmentEN 12373-5-1998铝和铝合金阳极氧化第5部分：用导纳测量法评定封闭阳极氧化膜的质量Aluminium and aluminium alloys - Anodizing - Part 5: Assessment of quality of sealed anodic oxidation coatings by measurement of admittanceEN 12373-6-1998铝和铝合金阳极氧

47、化第6部分：通过测量事发未经酸处理的磷酸/铬酸中浸泡后的质量损失评定封闭阳极氧化膜Aluminium and aluminium alloys - Anodizing - Part 6: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution without prior acid treatmentEN 12373-7-2002铝和铝合金阳极氧化第7部分

48、：通过测量事发经酸处理的磷酸/铬酸中浸泡后的质量损失评定封闭阳极氧化膜的Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatmentEN 12373-8-1998铝和铝合金阳极氧化第8部分：着色阳极氧化膜

49、可比耐紫外光和耐热色牢固度的测定Aluminium and aluminium alloys - Anodizing - Part 8: Determination of the comparative fastness to ultra-violet light and heat of coloured anodic oxidation coatingsEN 12373-9-1998铝和铝合金阳极氧化第9部分：用磨擦轮磨损试验机测定阳极氧化膜耐磨性和耐磨系数Aluminium and aluminium alloys - Anodizing - Part 9: Measurement of

50、wear resistance and wear index of anodic oxidation coatings using an abrasive wheel wear test apparatusEN 12384-1999铜和铜合金带材弹性弯曲极限的测定Copper and copper alloys - Determination of spring bending limit on stripEN 12392-2000铝和铝合金锻制品压力设备生产用制品的特殊要求Aluminium and aluminium alloys - Wrought products - Special

51、requirements for products intended for the production of pressure equipmentEN 12402-1999铅和铅合金分析用取样方法Lead and lead alloys - Methods of sampling for analysisEN 12420-1999铜和铜合金锻件Copper and copper alloys - ForgingsEN 12421-1998镁和镁合金纯镁Magnesium and magnesium alloys - Unalloyed magnesiumEN 12438-1998镁和镁合金

52、铸造阳极用镁合金Magnesium and magnesium alloys - Magnesium alloys for cast anodesEN 12441-1-2001锌和锌合金化学分析第1部分：锌合金中铝的测定滴定法Zinc and zinc alloys - Chemical analysis - Part 1: Determination of aluminium in zinc alloys; Titrimetric methodEN 12441-2-2001锌和锌合金化学分析第2部分：锌合金中镁的测定火焰原子吸收光谱法Zinc and zinc alloys - Chemic

53、al analysis - Part 2: Determination of magnesium in zinc alloys; Flame atomic absorption spectrometric methodEN 12441-3-2001锌和锌合金化学分析第3部分：铅、镉和铜的测定火焰原子吸收光谱法Zinc und zinc alloys - Chemical analysis - Part 3: Determination of lead, cadmium and copper; Flame atomic absorption spectrometric methodEN 1244

54、1-4-2003锌和锌合金化学分析第4部分：用分光光度法测定锌合金中的铁Zinc and zinc alloys - Chemical analysis - Part 4: Determination of iron in zinc alloys; Spectrophotometric methodEN 12441-5-2003锌和锌合金化学分析第5部分：用分光光度法测定原生锌中的铁Zinc and zinc alloys - Chemical analysis - Part 5: Determination of iron in primary zinc; Spectrophotometri

55、c methodEN 12441-6-2003锌和锌合金化学分析第6部分：用原子吸收光谱法测定铝和铁Zinc and zinc alloys - Chemical analysis - Part 6: Determination of aluminium and iron-Flame atomic absorption spectrometric methodEN 12449-1999铜和铜合金通用无缝圆管Copper and copper alloys - Seamless, round tubes for general purposesEN 12450-1999铜和铜合金无缝圆铜毛细管C

56、opper and copper alloys - Seamless, round copper capillary tubesEN 12451-1999铜和铜合金热交换器用无缝圆管Copper and copper alloys - Seamless, round tubes for heat exchangersEN 12452-1999铜和铜合金热交换器用轧制翅片无缝管Copper and copper alloys - Rolled, finned, seamless tubes for heat exchangersEN 12482-1-1998铝和铝合金一般用重轧坯料第1部分： 热

57、轧重轧坯料规范Aluminium and aluminium alloys - Reroll stock for general applications - Part 1: Specifications for hot rolled reroll stockEN 12482-2-1998铝和铝合金一般用重轧坯料第2部分：冷轧重轧坯料规范Aluminium and aluminium alloys - Reroll stock for general applications - Part 2: Specifications for cold rolled reroll stockEN 12487-2000金属的防腐蚀铝和铝合金上清洗和非清洗的铬酸盐转化镀层Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings o