w机构名称:国营长风机器厂环境试验检测计量中心_第1页
w机构名称:国营长风机器厂环境试验检测计量中心_第2页
w机构名称:国营长风机器厂环境试验检测计量中心_第3页
w机构名称:国营长风机器厂环境试验检测计量中心_第4页
w机构名称:国营长风机器厂环境试验检测计量中心_第5页
已阅读5页,还剩147页未读 继续免费阅读

下载本文档

版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领

文档简介

1、Good is good, but better carries it.精益求精,善益求善。w机构名称:国营长风机器厂环境试验检测计量中心w机构名称:国营长风机器厂环境试验检测计量中心机构名称:国营长风机器厂环境试验检测计量中心注册号:L4639地 址:A:甘肃省兰州市安宁西路270号获准认可能力索引序号地址能力范围评审类型更新时间1A授权签字人(中文)复评2013年10月22日2授权签字人(英文)复评2013年10月22日3A检测能力(中文)复评2013年10月22日4检测能力(英文)复评2013年10月22日5检测能力(中文)监督2014年12月23日6检测能力(英文)监督2014年12月

2、23日7A校准能力(中文)复评2013年10月22日8校准能力(英文)复评2013年10月22日9校准能力(中文)监督2014年12月23日10校准能力(英文)监督2014年12月23日Name:State-Owned Changfeng Machinery Plant Environmental Test for Detection Measurement CenterRegistration No.:L4639 ADDRESS:A: No.270, Anning West Road, Lanzhou, Gansu, ChinaINDEX OF ACCREDITED SIGNATORIES

3、No.AddressRangeTypeUpdate date1AApproved signatories (Chinese)Reassessment2013-10-222Approved signatories (English)Reassessment2013-10-223ATesting ability(Chinese)Reassessment2013-10-224Testing ability(English)Reassessment2013-10-225Testing ability(Chinese)Surveillance2014-12-236Testing ability(Engl

4、ish)Surveillance2014-12-237ACalibration ability (Chinese)Reassessment2013-10-228Calibration ability (English)Reassessment2013-10-229Calibration ability(Chinese)Surveillance2014-12-2310Calibration ability(English)Surveillance2014-12-23中国合格评定国家认可委员会认 可 证 书 附 件(注册号:CNAS L4639)名称: 国营长风机器厂环境试验检测计量中心 地址:甘

5、肃省兰州市安宁西路270号签发日期:2013年10月22日 有效期至:2016年10月21日更新日期:2013年10月22日附件1 认可的授权签字人及领域序号姓 名授权签字领域备 注1刘 剑全部检测和校准项目2李光杰全部检测项目3宋维仁全部校准项目4甘得文电学、无线电校准项目CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENTAPPENDIX OF ACCREDITATION CERTIFICATE(Registration No. CNAS L4639) NAME:State-Owned Changfeng Machin

6、ery Plant Environmental Test for Detection Measurement Center ADDRESS:No.270, Anning West Road, Lanzhou, Gansu, ChinaDate of Issue:2013-10-22 Date of Expiry:2016-10-21 Date of Update:2013-10-22APPENDIX 1 ACCREDITED SIGNATORIES AND SCOPEName Authorized Scope of SignatureNote1Liu jianAll testing and l

7、calibration scope2Li guangjieAll testing scope3Song weirenAll calibration scope4Gan dewenElectricity and radio calibration project 中国合格评定国家认可委员会认 可 证 书 附 件(注册号:CNAS L4639)名称: 国营长风机器厂环境试验检测计量中心 地址:甘肃省兰州市安宁西路270号认可依据:ISO/IEC 17025:2005以及CNAS特定认可要求签发日期:2013年10月22日 有效期至:2016年10月21日更新日期:2013年10月22日附件2 认可

8、的检测能力范围序号检测对象项目/参数领域代码检测标准(方法)名称及编号(含年号)限制范围说明序号名称1电子产品1低温试验0431.01电工电子产品环境试验 第2部分:试验方法 试验A:低温 GB/T2423.1-2008温度范围:常温-70 容积小于: (3.0×1.8×1.8)m³ 温度变化速率:10/min军用装备实验室环境试验方法 第4部分:低温试验GJB150.4A-2009军用设备环境试验方法 低温试验GJB150.4-1986仅用于特定客户的特定产品1电子产品2高温试验0431.02电工电子产品环境试验 第2部分:试验方法 试验B:高温GB/T2423

9、.2-2008温度范围:常温180 容积小于(5.0×3.4×2.6)m³军用装备实验室环境试验方法 第3部分:高温试验GJB150.3A-2009军用设备环境试验方法 高温试验 GJB150.3-1986仅用于特定客户的特定产品3恒定湿热试验0431.03电工电子产品环境试验 第2部分:试验方法 试验Cab:恒定湿热试验GB/T2423.3-2006温度范围:1085 湿度范围:20%98% 容积小于(5.0×3.4×2.6)m3电工电子产品环境试验 第2部分:试验方法 试验Cb:设备用恒定湿热GB/T2423.9-20011电子产品3恒定湿

10、热试验0431.03电工电子产品环境试验 第2部分:试验方法 试验Cy:恒定湿热 主要用于元件的加速试验GB/T2423.50-1999温度范围:1085 湿度范围:20%98% 容积小于(5.0×3.4×2.6)m34交变湿热试验0431.03电工电子产品环境试验 第2部分:试验方法 试验Db:交变湿热试验(12h+12h循环) GB/T2423.4-2008温度范围:1085 湿度范围:20%98% 容积小于(5.0×3.4×2.6)m3军用装备实验室环境试验方法 第9部分:湿热试验GJB150.9A-20091电子产品4交变湿热试验0431.03军

11、用设备环境试验方法湿热试验GJB150.9-1986温度范围:1085 湿度范围:20%98% 容积小于(5.0×3.4×2.6)m3仅用于特定客户的特定产品1电子产品5冲击试验0431.04电工电子产品环境试验 第2部分:试验方法 试验Ea和导则:冲击 GB/T2423.5-1995峰值加速度:80g 脉冲持续时间:2ms20ms军用装备实验室环境试验方法 第18部分:冲击试验GJB150.18A-2009只做:程序 功能性冲击;程序 追撞安全军用设备环境试验方法冲击试验GJB150.18-1986只做试验5、试验6仅用于特定客户的特定产品1电子产品6碰撞试验0431.1

12、7电工电子产品环境试验 第2部分:试验方法 试验Eb和导则:碰撞 GB/T2423.6-1995峰值加速度:80g 脉冲持续时间:2ms20ms1电子产品7振动试验0431.05电工电子产品环境试验 第2部分:试验方法 试验Fc:振动(正弦)GB/T2423.10-2008最大推力:55.6KN 最大加速度:40g 最大位移:50.8 频率:(52000)HzGJB150.16A-2009 只做:程序 一般振动程序 组合式飞机外挂的挂飞和自由飞 GJB150.16-1986不测大型组合件的运输、散装件的运输、舰船的振动1电子产品7振动试验0431.05电工电子产品环境试验 第2部分:试验方法

13、试验Fd:宽频带随机振动一般要求GB/T2423.11-1997最大推力:55.6KN 最大加速度:40g 最大位移:50.8 频率:(52000)HzGJB150.16A-2009 只做:程序 一般振动程序 组合式飞机外挂的挂飞和自由飞 GJB150.16-1986不测大型组合件的运输、散装件的运输、舰船的振动1电子产品7振动试验0431.05军用装备实验室环境试验方法 第18部分:振动试验GJB150.16A-2009最大推力:55.6KN 最大加速度:40g 最大位移:50.8 频率:(52000)HzGJB150.16A-2009 只做:程序 一般振动程序 组合式飞机外挂的挂飞和自由飞

14、 GJB150.16-1986不测大型组合件的运输、散装件的运输、舰船的振动1电子产品7振动试验0431.05军用设备环境试验方法 振动试验 GJB150.16-1986最大推力:55.6KN 最大加速度:40g 最大位移:50.8 频率:(52000)HzGJB150.16A-2009 只做:程序 一般振动程序 组合式飞机外挂的挂飞和自由飞 GJB150.16-1986不测大型组合件的运输、散装件的运输、舰船的振动仅用于特定客户的特定产品1电子产品8加速度试验0431.06电工电子产品环境试验 第2部分:试验方法 试验Ga和导则:稳态加速度GB/T2423.15-2008最大加速度:50g军

15、用设备环境试验方法 加速度试验 GJB150.15A-2009军用设备环境试验方法 加速度试验 GJB150.15-1986仅用于特定客户的特定产品9低气压(高度)试验0431.17电工电子产品基本环境试验规程 试验M:低气压试验方法GB/T2423.21-2008温度范围:常温70压力范围:常压5Kpa容积小于: (3.0×1.8×1.8)m3军用设备环境试验方法 低气压(高度)试验GJB150.2A-20091电子产品9低气压(高度)试验0431.17军用设备环境试验方法 低气压(高度)试验GJB150.2-1986温度范围:常温70压力范围:常压5Kpa容积小于: (

16、3.0×1.8×1.8)m3仅用于特定客户的特定产品1电子产品10温度冲击(变化)试验0431.11电工电子产品环境试验 第2部分:试验方法 试验N:温度变化B/T2423.22-2002容积小于: (0.7×0.7×0.65)m3两箱式温度范围: -80220最大负载:50Kg军用设备环境试验方法 温度冲击试验 GJB150.5A-20091电子产品10温度冲击(变化)试验0431.11军用设备环境试验方法 温度冲击试验 GJB150.5-1986容积小于: (0.7×0.7×0.65)m3两箱式温度范围: -80220最大负载:5

17、0Kg仅用于特定客户的特定产品11温度-高度试验0431.16电工电子产品基本环境试验规程 试验Z/AM:低温/低气压综合试验 GB/T2423.25-2008温度范围:常温-55 压力范围:常压5Kpa 容积小于: (3.0×1.8×1.8)m3军用设备环境试验方法 温度高度试验 GJB150.6-1986仅用于特定客户的特定产品1电子产品12环境应力筛选0431.17电子产品环境应力筛选方法GJB1032-1990容积小于: (2.2×1.7×1.7)m3温度范围:-70150 温变率:10/min最大位移:50.8最大加速度:40g频率:(5200

18、0)Hz最大推力:55.6KN1电子产品13可靠性鉴定、验收试验0431.17电子测量仪器可靠性试验GB11463-1989容积小于:(2.2×1.7×1.7)m3; 温度范围:-70150 ; 温变率:10/min ;最大位移:50.8; 最大加速度:40g; 频率:(52000)Hz; 最大推力:55.6KN可靠性鉴定和验收试验GJB899-20092集成运放 电路1输入失调电压0418.07半导体器件集成电路;第3部分:模拟集成电路 GB/T17940-2000只测:0±2V只测: 图形速率:20MHZ;封装形式:DIP;管脚:24以下2输入失调电流只测:0

19、±2A3输入偏置电流只测:0±2A4开环电压增益只测:0±40V5共模抑制比只测:0±40V6电源电压抑制比只测:0±40V7输出短路电流只测:0±200A3数字集成 电路1输入钳位电压0418.07半导体集成电路CMOS电路测试方法的基本原理 SJ/10741-2000只测:0±8V只测: 图形速率:20MHZ;封装形式:DIP;管脚:24以下2输入高电平电压只测:0±8V3输入低电平电压只测:0±2V4输出高电平电压只测:0±8V5输出低电平电压只测:0±2V6输入高电平电流只测:

20、0±20A7输入低电平电流只测:0±2mA8输出高电平电流只测:0±2mA9输出低电平电流只测:0±20mA3数字集成 电路10电源电流0418.07半导体集成电路CMOS电路测试方法的基本原理 SJ/10741-2000只测:0±200mA只测: 图形速率:20MHZ;封装形式:DIP;管脚:24以下4集成电路 筛选1温度循环418.07微电子器件试验方法和程序 GJB548B-2005只做:方法1010.1条件B2外部目检3粒子碰撞噪声检测(PIND)只做:方法2020.1;条件A.条件B4老炼试验只做:方法1015.1;025V;040A

21、5高温贮存只做:01504集成电路 筛选6密封418.07微电子器件试验方法和程序 GJB548B-2005只做:方法1014.2 条件A1.C1.5双极型 晶体管1共发射正向电流传输比418.03半导体器件分立器第7部分双极型晶体管 GB/T4587-1994只测:05A2基极-发射极饱和电压只测:010V3集电极-发射极饱和电压只测:010V4集电极-基极电流只测:010µA5集电极-基极击穿电压, 发射极-基极击穿电压只测:0500V6集电极-发射极电流只测:010µA6整流二极管1正向电压418.03半导体器件分立器件第2部分整流二极管 GB/T6571-1995只

22、测:010V2反向电流只测:030µA7开关二极管1正向电压418.03半导体器件分立器件第3部分信号(包括开关)和调整二极管 GB/T6571-1995只测:010V2反向电流只测:030µA8稳压二极管1工作电压418.03半导体器件分立器件第3部分信号(包括开关)和调整二极管 GB/T6571-1995只测:010V2微分电阻只测:01003反向电流只测:030µA4正向电压只测:010V9分立器件 筛选1温度循环418.03半导体分立器件试验方法GJB128A-1997只做:方法1051条件A、B2外观3高温反偏只做: 方法1038 0600V 1.0&#

23、181;A50mA9分立器件 筛选4老炼试验418.03半导体分立器件试验方法GJB128A-1997只做:方法1038; 方法1039;060V 10mA40A5高温贮存只做: 方法103101506密封只做:方法1071条件 H1,条件C10电阻器1直流电阻测试418.01电子及电气元件测试 GJB360A-1996方法303只测:0.0199.9999M2温度冲击试验电子及电气元件测试方法GJB360A-1996 方法107只做:条件A11电容器1直流漏电流418.02有可靠性指标的非固体电解质钽固定电容器总规范 GJB733A-1996 3.7只测:030A有可靠性指标的铝电解电容器总

24、规范GJB603-1988 3.711电容器2电容量418.02有可靠性指标的非固体电解质钽固定电容器总规范 GJB733A-1996 3.8只测:0.01PF9990uF有可靠性指标的铝电解电容器总规范GJB603-1988 3.8电子设备用固定电容器第1部分总规范GB/T2693-2001 4.711电容器3损耗角有可靠性指标的非固体电解质钽固定电容器总规范 GJB733A-1996 3.9只测:00.9999有可靠性指标的铝电解电容器总规范GJB603-1988 3.9电子设备用固定电容器第1部分:总规范GB/T2693-2001 2.2.244高温电老炼电子及电气元件测试方法GJB36

25、0A-1996 方法108只测:85±2仅用于特定客户的特定产品5温度冲击试验电子及电气元件测试方法GJB360A-1996 方法107)只做:条件A仅用于特定客户的特定产品6耐电压电子设备用固定电容器第1部分:总规范GB/T2693-2001 4.6只测:010000V11电容器7外观有可靠性指标的非固体电解质钽固定电容器总规范GJB733A-1996 3.4、3.5有可靠性指标的铝电解电容器总规范GJB603-1988 3.4、3.5电子设备用固定电容器第1部分:总规范GB/T2693-2001 4.412电感1电感量418.08有和无可靠性指标的模制射频固定电感器通用规范GJB

26、675A-2002 4.5.3.2只测:0.05uH100H2温度冲击试验有和无可靠性指标的模制射频固定电感器通用规范GJB675A-2002 3.4只做:条件A13热处理炉1温度1504.01热处理炉有效加热区测定方法GB/T9452-2003只测:(01000)27No. CNAS L4639 第 27 页 共 152 页 Should there be any inconsistencies between Chinese and English versions of the scope of accreditation, the Chinese version shall preva

27、il in that the English version is provided by the conformity assessment body and is for reference only. CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENTAPPENDIX OF ACCREDITATION CERTIFICATE(Registration No. CNAS L4639) NAME:State-Owned Changfeng Machinery Plant Environmental Test for D

28、etection Measurement Center ADDRESS:No.270, Anning West Road, Lanzhou, Gansu, ChinaAccreditation Criteria:ISO/IEC 17025:2005 and relevant requirements of CNASDate of Issue:2013-10-22 Date of Expiry:2016-10-21 Date of Update:2013-10-22APPENDIX 2 ACCREDITED TESTINGTest ObjectItem/ParameterCode of Fiel

29、d Title, Code of Standard or Method Limitation NoteItem/ Parameter1Electronic products1Low temperature test0431.01Environmental testing for electric and electronic productsPart 2: Test methodsTests A :ColdGB/T2423.1-2008Accredited only for:Temperature range;normal-70 volume:<(3.0×1.8×1.

30、8)m3 Change rate:10/min1Electronic products1Low temperature test 0431.01Laboratory environmental test methods for military materiel-Part4:Low temperature test GJB150.4A-2009Accredited only for:Temperature range;normal-70 volume:<(3.0×1.8×1.8)m3 Change rate:10/minEnvironmentalTest method

31、s for Militaryequipments Low temperature test GJB150.4-1986only for specific products to specific customer2High temperature test0431.02Environmental testing for electric and electronic productsPart 2: Test methods-Tests B: Dry heatGB/T2423.2-2008Accredited only for:Temperature range;normal+180;volum

32、e:<(5.0×3.4×2.6)m31Electronic products2High temperature test0431.02Laboratory environmental test methods for military materiel-Part3:High temperature testGJB150.3A-2009Accredited only for:Temperature range;normal+180;volume:<(5.0×3.4×2.6)m3Environmental Test methods for Mil

33、itaryequipments High temperature testGJB150.3-1986only for specific products to specific customer1Electronic products3Damp heat ,Steady state0431.03Environmental testing for electric and electronic productsPart 2: Test methods-Tests Cab: Damp heat, steady state GB/T2423.3-2006Accredited only for:Tem

34、perature range;+10+85;Damp range:(20%-98%)RH;volume:<(5.0×3.4×2.6)m31Electronic products3Damp heat ,Steady state0431.03Environmental testing for electric and electronic productsPart 2:Test methodsTest Cb:Damp heat, steady state, primarily for equipment GB/T2423.9-2001Accredited only for

35、:Temperature range;+10+85;Damp range:(20%-98%)RH;volume:<(5.0×3.4×2.6)m3Environmental testing for Electric and electronic productsPart 2:TestsTest Cy: Damp heat, steady state, accelerated test primarily intended for componentsGB/T2423.50-19994Damp heat,cyclic0431.03Environmental testing

36、 for electric and electronic productsPart 2:Test methodsTest Db:Alternating hot and humid(12h+12h) GB/T2423.4-2008Accredited only for:Temperature range;+10+85;Damp range:(20%-98%)RH;volume:<(5.0×3.4×2.6)m31Electronic products4Damp heat,cyclic0431.03Laboratory environmental test methods

37、for military materiel-Part9: Damp heat testGJB150.9A-2009Accredited only for:Temperature range;+10+85;Damp range:(20%-98%)RH;volume:<(5.0×3.4×2.6)m3Environmental Test methods for Military equipments Damp heat testGJB150.9-1986only for specific products to specific customer1Electronic pr

38、oducts5Shock0431.04Environmental testing for electric and electronic productsPart 2:Test methodsTest Ea and guidance: ShockGB/T2423.5-1995GJB150.18A-2009Accredited only for:Program Functionality shock;Program Crashsafety Accredited only for:150.18-1986test 5;test 6;Laboratory environmental test meth

39、ods for military materiel-Part18:Shock testGJB150.18A-2009Environmental Test methods for Militaryequipments Shock testGJB150.18-1986only for specific products to specific customer1Electronic products6Bump0431.17Environmental testing for electric and electronic productsPart 2:Test methodsTest Eb and

40、guidance:Bump GB/T2423.6-1995only to do Amplitude:80g;Pulse width:2ms to20ms7Vibration0431.05Environmental testing for electric and electronic products Part 2:Test methods Test Fc: Vibration(Sinusoidal) GB/T2423.10-2008GJB150.16A only to do:Program Commonly vibration:Program Flying and free combinat

41、ion type plug GJB150.16 Except forCarriage of the large composites piece、the carriage of the opposites fix piece、vibration of the warship1Electronic products7Vibration0431.05Environmental testing for electric and electronic products Part 2:Test methods Test Fd:Random Vibration wide band-General requ

42、irements GB/T2423.11-1997GJB150.16A only to do:Program Commonly vibration:Program Flying and free combination type plug GJB150.16 Except forCarriage of the large composites piece、the carriage of the opposites fix piece、vibration of the warshipLaboratory environmental test methods for military materi

43、el-Part16:Vibration testGJB150.16A-20091Electronic products7Vibration0431.05Environmental Test methods for Military equipments Vibration test GJB150.16-1986GJB150.16A only to do:Program Commonly vibration:Program Flying and free combination type plug GJB150.16 Except forCarriage of the large composi

44、tes piece、the carriage of the opposites fix piece、vibration of the warshiponly for specific products to specific customer8Acceleration0431.06Environmental testing for electric and electronic products Part 2:Test methods Test Ga and guidance: Acceleration,steady stateGB/T2423.15-2008only to do:Max ;a

45、cceleration :50g1Electronic products8Acceleration0431.06Environmental Test methods for Military equipments Acceleration testGJB150.15A-2009only to do:Max ;acceleration :50gEnvironmental Test methods for Military equipments Acceleration test GJB150.15-1986only for specific products to specific custom

46、er1Electronic products9Low air pressure(Altitude)0431.17Basic environmental testing procedures for electric and electronicproducts Test M:Low air pressureGB/T2423.21-2008only to dor :Temperature range;Normal pressure range:Norma pressure5kpa;volume:<(3.0×1.8×1.8)m3Environmental Test met

47、hods for Military equipments Low pressure (altitude) testGJB150.2A-20091Electronic products9Low air pressure(Altitude)0431.17Environmental Test methods for Military equipments Low pressure (altitude) testGJB150.2-1986only to dor :Temperature range;Normal pressure range:Norma pressure5kpa;volume:<

48、(3.0×1.8×1.8)m3only for specific products to specific customer10Temperature Shock0431.11Environmental testing for electric and electronic productsPart 2: Test methodsTest N:Change of temperature GB/T2423.22-2002only to dovolume:(0.7×0.7×0.65)m3;Two box test Temperature range;-80+

49、220;Max load:50kgEnvironmental Test methods for Military equipments TemperatureShock testGJB150.5A-20091Electronic products10Temperature Shock0431.11Environmental Test methods for Military equipments TemperatureShock testGJB150.5-1986only to dovolume:(0.7×0.7×0.65)m3;Two box test Temperatu

50、re range;-80+220;Max load:50kgonly for specific products to specific customer11Temperature -altiude test0431.16Basic environmental testing procedures for electric and electronic products Test Z/AM: combined cold/low air pressure testsGB/T2423.25-2008only to do :Temperature range;Normal-55;pressure range:Norma5Kpa;volume:<(3.0×1.8×1.8)m3only for specific products to specific customerEnvironmental Test methods for Military Equipments Temperaturealtitude testGJB150.6-19861Electronic products12Environment stress screen0431.17Environmental

温馨提示

  • 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
  • 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
  • 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
  • 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
  • 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
  • 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
  • 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。

最新文档

评论

0/150

提交评论