FURUNOECDISMultipleChoiceTest古野电子海图题库测试题

1、1. Which operation can you perform on the FURUNO ECDIS? ( B )a. I can play back my ship s past track on the ECDISb. I can record my position manually on the RNCs.c. I can create Notes from my Voyage Log to document a voyage on the charts.d. I can set the ECDIS to include engine log information into

2、the Voyage Log automatically.2. Which operation can you perform on the FURUNO ECDIS? ( A )a. I can record my position manually on the ENCs.b. I can set the ECDIS to automatically choosing a Safety contour based on my setting of shipmaximum draft.c. I can set Ship s maximum height to enable chart ale

3、rts from areas in the charts where there isnot sufficient air draft.d. I can send a copy of my Route Plan to an AIS target as a Safety Message.3. Which operation can you perform on the FURUNO ECDIS? ( C )a. I can record target ship s position in the Voyage log automatically.b. I can record a positio

4、n fix manually by using just one distance and onebearing.c. I can playback my past voyage track on the charts.d. I can send my Route Plan and User Chart to a FURUNO GPS for display on the GPS.4. Which operation can you perform with the FURUNO ECDIS? ( D )a. I can sendmy RoutePlan andUser Chartto any

5、 RADAR for display on the RADAR.b. I can sendmy RoutePlan andUser Chartto any AIS for display on the AIS.c. I can sendmy RoutePlan andUser Chartto any GPS for display on the GPS.d. I can sendmy RoutePlan andUser Chartto a FURUNO RADAR for display onthe RADAR.5. Which operation can you perform during

6、 a voyage? ( A )a. I can use the Event function to record special events in the Event Log.b. I can create a User Chart from the Alert Log and save it to a USB memory device.c. I can create a User Chart from the Chart Usage Log and save it to a USB memory device.d. I can create a User Chart from the

7、Voyage Log and save it to a USB memory device.6. Which operation can you perform after completion of a voyage? ( D )a. I can add additional records of manual positions to the Voyage Log adding further details tothe past voyage.b. I can create a User Chart from the monitored Route Plan and save it to

8、 a USB memory device.c. I can create a backupcopy of theVoyage log on a USB memory device.d. I can view and print acopy of theChart Usage Log.7. Which operation can you perform during a voyage or after completion of a voyage? ( B )a. I can use the Event function to record special eventsintheDetails

9、Log.b. I can view and print acopy of theVoyage Log. ( 或更换为Details Log)c. I can create a backup copyof Own Ship s past track (120 minutes max.) on a USB memory device and keep the copy in a safe location for future reference.d. I can reset the Chart Usage Log after creating a backup copy.8. What is a

10、 Manual Update? ( B )a. A Manual Update is an update applied using the Manual function in Load&Update Charts.b. A Manual Update is an update to the charts created by the operator frominformationreceivedfrom the Pilot - a Navtex message - a VHF broadcast etc.c. A Manual Update is an update applie

11、d to the charts by an official representative of the chart producer.d. A Manual Update is a chart created using the digitizer function of the FURUNO ECDIS.9. When do you use Manual Update? ( B )a. Always when I have to update my charts.b. When I receive information which must be displayed on my ECDI

12、S and this is not yet included in the official weekly updates.c. I should never use Manual Updates.d. When I have to update the software of the ECDIS.10. Where can Manual Updates be displayed? ( D )a. Only on ENCs.b. Only on RNCs.c. Only on Vector Charts.d. On all types of charts in the ECDIS.11. Ho

13、w can you see if a chart object is created using Manual Updated? ( D )a. The Manual Update will be larger than any other chart objects.b. It is always shown in red.c. It will have a special orange marker.d. There is no way I can see if a chart object is created using Manual Updates.12. Can you copy

14、your Manual Updates from one FURUNO ECDIS to another? ( A )a. No.b. Yes-by using the Backup and Restore dialogue to transfer the Manual Updates to a USB.c. Yes-by sending the Manual updates via an email.d. No-but I can transfer them to another manufacturer s type of ECDIS.13. Can you create a Manual

15、 Update from an AIS Safety Message shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS createit automatically.d. No.14. Can you create a Manual Update from an Navtex Mes

16、sage shown on the ECDIS? ( A )a. Yes-by manually creating the object.b. Yes-by letting the ECDIS create the object automatically.c. Yes-either by creating it manually or letting the ECDIS createit automatically.d. No.15. What should you remember to set up before planning a route? ( D )a. Thesetting

17、for the Voyage Log.b. The Alarm Level in the Operation submenu.c. TheConning Display in Installation Parameters.d. TheChart Viewing Dates.16. What should you do if you have to leave your planned route during a voyage? ( D )a. Switch off the FURUNO ECDIS and concentrate on the RADAR.b. Disable the ro

18、ute monitoring on the FURUNO ECDIS.c. Change the display of the FURUNO ECDIS to IMO All Other.d. Configure and enable the Check Area function to assist me in scanning the ENCs for dangerto navigation and hazardous objects.17. How do you record Own Ship s position on the ECDIS charts when you have aR

19、ange/Bearing observation from your RADAR? ( B )a. I cannot record own ship s position manually on the FURUNO ECDIS.b. I record LOP in the Record function of the Event Log.c. I press the CTRL & ACQ/ACT button on the Control Unit.d. I select Record Event Log and User Event from the Instant Access

20、bar and insert the observation in the Record User Event window.18. How do you document your previous voyage on the FURUNO ECDIS? ( D )a. Iuse my paper Logbook as documentation.b. Iuse my paper Logbook and my VDR or SVDR as documentation.c. Iuse the tracking function in the symbol display.d. Ishow a

21、playback of my past voyage track on the charts.19. Where can you find a list of the Manual Updates that have been applied to the FURUNO ECDIS? ( B )a. In theChart Legend.b. In theManual Update Window.c. In theChart Catalogue.d. In theChart Display menu.20. Which color scheme is used for Manual updat

22、e on the FURUNO ECDIS? ( B )a. Blue ENC symbols.b. Standard ENC symbols.c. Orange ENC symbols.d. Red ENC symbols.21. Where do you change the Target past position density? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.22. Where do you change the Tra

23、cked Target size? ( C )a. In the Quick Access bar.b. In Chart Display.c. In the symbol display.d. In the Status bar.23. What does the alert number 495 indicate? ( A )a. Anchor watch errorb. Track control stopped.c. Steering parameter errord. Filter: Init. Error24. What does the alert number 635 indi

24、cate? (A)a. No officialdatab. Log errorc. Dual axislog (WT)errord. Dual axislog (BT)error25. What does the alert number 257 indicate? ( D )a. Heading sensor not availableb. Prg track: Need higher speedc. Prg track: Use radius Ctrld. Gyro 3 COM error26. What does the alert number 450 indicate? ( D )a

25、. Route: Illegal To WPTb. RADAR comm. errorc. LAN adapter version errord. Heading sensor not available27. What does the alert number 640 indicate? ( B )a. Datum mismatchb. Chart align: Over 30 min.c. RADAR antenna ID errord. Gyro error (Trackpilot)28. Where do you set the Shallow Contour? ( C ) a.In

26、Chart Legendb. InSymbol Displayc. InChart Alertd. InChart Display29. Where do you set the Shallow Pattern? ( C ) a.InChart Displayb. InSymbol Displayc. InBasic Settingd. Inchart catalogue30. Where do you set the Deep Contour? ( C ) a.InChart Legendb. InSymbol Displayc. InChart Alertd. InChart Displa

27、y31. Where do you control the AIO? ( C ) a.InChart Legendb. InSymbol Displayc. InChart Displayd. InChart Catalogue32. When an ENC is outlined in Green in the Chart Catalogue - it means? ( A ) a.License is valid chart is up-to-dateb. License is valid chart is NOT up-to-datec. License is available - c

28、hart not installedd. License is not available or has expired33. When an ENC is outlined in Yellow in the Chart Catalogue -it means? ( C ) a. License is valid chart is up-to-date b. License is available - chart not installed c. License is valid up-to-date status doubtful d. License is not available o

29、r has expired34. Which information can you find in the Raster Chart Legend? ( D )a. Magnetic Variationb. Safety Contour settingc. Quality of datad. T&P Notice35. Which information can you find in the Raster Chart Legend? ( C ) a.Edition numberb. Last displayed updatec. Edition dated. Update issu

30、e date36. Which information can you find in the Raster Chart Legend? ( B ) a.Shallow Contourb. Chart Namec. Chart Viewing dated. Deep Contour37. Where can you find information concerning the charts stored on the HDD? ( C)a. On the Internetb. The Chief Officer will know.c. In the chart catalogued. In

31、 the Chart Display menu38. Which recording function is available in the FURUNO ECDIS? ( A )a. Danger TargetsLogb. Engine Logc. Speed Logd. GPS Log39. Which recording function is available in the FURUNO ECDIS? ( C )a. AIS Logb. Engine Logc. Voyage Logd. RADAR Log40. Where do you set system priority o

32、f multiple GPS connected to the ECDIS? ( A)a. In the Sensor dialogueb. In Basic Settingc. In Ship and RouteParametersd. In Nav Tools41. Where do you find information on the software version of the FURUNO ECDIS? ( C )a. In the Voyage Logb. In the System dialogue ofthe Menuc. In the About dialogued. I

33、n the S52 PresentationLibrary42. Which ECDIS setting is adjusted in Ship and Route Parameters? ( D )a. Position offsetb. Safety Contourc. Alarm volumed. Ship s maximum speed43. Which printing option is available for the User Chart? ( B )a. Circle Reportb. Full Reportc. System Reportd. Detailed Repor

34、t44. What is the maximum limit of the Check Area? ( B )a. No limitb. 240min + 20NM + 5km + 999mc. 120min + 10NM + 3km + 500md. 999min + 999NM + 999km + 999m45. How do you hide (not delete) a Manual Update object? ( C )a. I select Clear from the Manual Updates menub. I select Undo Last from the Manua

35、l Updates menuc. I deselect that general type of chart object in the Chart Display dialogued. I deselect the option from the Symbol Display dialogue46. Can you set the overall maximum speed for a route plan? ( A )a. Yes in the Ship and Route parameters of the Menub. Yes in Chart Displayc. Yes in Opt

36、imization parametersd. Yes in the route planning tool47. Can you monitor a route even though it indicates an active Alert when you have completed the Route Plan Check? ( A )a. Yes - the only thing preventing me from monitoring would be an impossible Turn message in the WPT tab.b. Yes - if I enter th

37、e Service Safety Passwordc. Nod. It depends on the type of Alert generated (Safety Contour -Restricted Area -Caution Area etc.) 48. How are loaded ENCs converted into SENCs when updating? ( A )a. The FURUNO ECDIS will normally convert the ENCs to SENCs automaticallyb. I must use the conversion tool

38、from the Menuc. I cannot convert ENCs into SENCsd. I load the new Permit file using the file named ENC. PMT and then I use the S52 presentation Library from the System menu in the Chart Menu to convert the ENCs into SENCs.49. How do you manually record Own Ship s current position in the L)ogs? ( Da.

39、 Byopening the Voyage Log and entering the current position.b. Byright clicking on own ship icon on the user interface.c. Bypressing the Record button on the Control Unit.d. Byusing the record position event function of the EventLog.50. How do you add navigational chart objects to the FURUNO ECDIS w

40、hen you are required to do so byNotice To Mariners? ( 或改为 a Navtex message / information received via VHF broadcast) ( B ) a. I cannot add any chart objects to the ECDIS unless they are included in the weekly update CDs.b. I use the Manual Updates function.c. I use the User Chart function.d. I use t

41、he Chart Edit function.51. Which of these setting generate an alarm from the Chart Alert setting? ( C )a. Shallow Contourb. Safety Depthc. Safety Contourd. Deep Contour52. Can you plan a route while you monitor another route? ( C )a. Nob. Yes but only if I have two ECDISc. Yes theroute planning func

42、tion is independent from the route monitoringfunction.d. Yes butImust select the same Safety Contour for both route plans.53. How do you save your route to the Hard Disc Drive when it has been edited? ( B )a. I don tte. Tishaeurtooumatically saved to the hard disc drive wheneverchanges are applied.b

43、. I click onSave or Save As in the Route Planning tool.c. I select Save in the Backup and Restore dialogue.d. I click New in the Route Planning tool.54. What is the purpose of Kalman Filter? ( C )a. The Kalman filter is the Antivirus software running on the FURUNO ECDIS.b. The filter is used to calc

44、ulate an astronomical position from several astronomical observations entered by the operator.c. The filter continuously monitors the position given by each individual position sensor to determine if the sensor is reliable or not.d. The filter is used to verify the quality of data on the Base and Up

45、date CDs.55. How do you switch the Kalman filter on or off? ( B )a. The Kalman filter is always switched on when a route is put into monitor mode and switched off when there is no route being monitored.b. The Kalman filter is always on so I never have to switch it on or off.c. The Kalman filter is s

46、witched on or off in the Sensor menu on the Positiontab.d. The Kalman filter is switched on when steering is switched to Autopilot.56. How do you update your vector charts on the Furuno ECDIS using the ENC update CD? ( A )a. I use the AutoLoad function.b. I create a Manual Update from the informatio

47、n on the CD.c. I create a User chart.d. I import the information using the Chart Details function in the Chart Catalogue.57. Which setting can be changed in Sensors? ( A )a. Log stabilization mode.b. Safety Contour setting.c. Safety Depth setting.d. Kalman Filter setting.58. How do you open the User

48、 Chart planning tool? ( A )a. I select “ Planning ” and then “ User Chart ” in the Quick Access bar when in Plan mode.b. I select“ Planning ” and then “ User Chart ” in the Quick Access bar when in Navi modc. I select Manual Update from the Menu in Charts mode.d. I left click on User Chart in the in

49、formation sidebar - then I select Plan.59. Where do you select the color Palette used to display the charts? ( C )a. InChart Legend.b. InChart Display.c. InQuick Access Bar.d. InChart Catalogue.60. Where do you control the settings and visibility of the chart layers? ( C )a. InChart Legendb. InSymbo

50、l Displayc. InChart Displayd. InBasic Setting61. Where do you control the visibility of the user overlays (User Chart -Route - etc.)? ( B )a. InChart Legendb. InSymbol Displayc. InChart Displayd. InChart Catalogue62-1. Where do you change the visibility of your User Chart ( 或改为 monitored route / pla

51、nned route/circles)? ( B )a. InChart Legendb. InSymbol Displayc. InChart Displayd. InChart Catalogue62-2. Where do you change the Ship Outlines (或改为Velocity Vectors style)? ( C )a. In the Quick Access barb. In Chart Displayc. In Symbol Displayd. In the Status bar63. How are regular T&Ps updated

52、on the ECDIS? ( C )a. T&Ps must always be created as manual Updates.b. I create a Manual Update containing the T&Ps using the Manual function in the Load & Update function of the Chart Menu.c. Most T&Ps are included in the weekly update CD and these are updated automatically together

53、 with the other updates on the CD.d. I can not update T&Ps on the FURUNO ECDIS.64. Where can you update the ENCs? ( A )a. In theChart Manager (Individual Update).b. In theUpdate function of chart displayc. In theUpdate function of the System settings.d. In theUpdate function of the Chart Legend.

54、65. How can you reset the odometer? ( A )a. I canreset theodometer from theVoyage tab of the Menu.b. I canreset theodometer from theSensor setting dialogue.c. I canreset theodometer from theSymbol Display dialogue.d. I canreset theodometer from theQuick Access sidebar.66. When the software of the FU

55、RUNO ECDIS is being updated - it is important that? ( C )a. The software should be loaded from a USB memory device.b. The FURUNO ECDIS is put in standby mode before updating.c. You create backup copies of all critical info in the ECDIS before updating.d. The ECDIS is disconnected from the RADRA.67.

56、What should you remember to set up first when planning a route? ( C )a. The setting for the Voyage Log.b. The Alarm Level in the Operation submenu.c. The safety Contour in the route planning tool.d. The Radar overlay.68. Where can you enter information notes on Pilot data (VHF channels etc.) to be u

57、sed during monitoring in the FURUNO ECDIS? ( D )a. In theVoyage Log.b. In thePilot Data.c. In theUser Event function.d. In theUser Chart.69. How do you start the route planning tool? ( D )a. I press Plan on the Control Unit.b. I click on the Route icon in the Status bar.c. I select Route Plan from the Menu dialogue.d. I click on Route in the Quick Access bar.70. How do you mod