航发pcf1报告全尺寸.part1measured

1、CS11_Fullymeasured :Project Name Part Number CADNumber Product:BRACKETDOORTRIMNVCCMaterialstandards:VDA239-CR1 Actual Material : CR1:Coatingthickness: GI50/50-U Detection time :2016/12/11检测日全尺CS11_Fullymeasured :Project Name Part Number CADNumber Product:BRACKETDOORTRIMNVCCMaterialstandards:VDA239-C

2、R1 Actual Material : CR1:Coatingthickness: GI50/50-U Detection time :2016/12/11检测日全尺型修孔位孔RPSRPSStep 1 : Surface RationalDMIS(TM) Step 1 : Surface RationalDMIS(TM) External-Array Software, 第 1 -Step 2 : Trim RationalDMIS(TM) External-ArrayStep 2 : Trim RationalDMIS(TM) External-Array Software, 第 2 -S

3、tep 3 : RationalDMIS(TM) External-Array Software,Step 3 : RationalDMIS(TM) External-Array Software, 第 3 -RationalDMIS(TM) External-Array Software, 第 4 -RationalDMIS(TM) External-Array Software, 第 4 -Step4:Holesize 0Step4:Holesize 0Step5:REPORT CHECKING Measure thickness request: 0.80.05actual 0.79 L

4、IMITS MAX : 123423456789Step5:REPORT CHECKING Measure thickness request: 0.80.05actual 0.79 LIMITS MAX : 123423456789THINNING Step6:AppearanceAppearance Control 1Is the rignt 2薄率是否 料厚的 20%范 内？THINNING MAX no more Venire caliper 游标卡Step6:AppearanceAppearance Control 1Is the rignt 2薄率是否 料厚的 20%范 内？THI

5、NNING MAX no more Venire caliper 游标卡3No 40.3mm glitches, Venire caliper 游标卡5是否有模痕、压伤无手感可接No roughness detect with the with the 6No degradation or withthe 7是否有起皱、形装配面平0.2MM 以内？No Visual/Venire 目视/游标卡89感？Marking information crrect ?Visual/ with the 目视/手3D Report tolerance is the same with PRS is the same with T