【基于单片机的蔬菜大棚控制系统设计与实现15000字（论文）】

。参考文献杜红霞,李慧冬,方丽萍,陈子雷,官帅,梁京芸.一种可自动通风的蔬菜大棚[P].山东：CN206101119U,2017-04-19.杨方,苏中滨,王润涛,王基宇,张健,任帅,刘莹,马佳玉.基于物理农业生物电场调控的自动化温室大棚[P].黑龙江：CN103210809A,2013-07-24.董文国.蔬菜温室大棚智能控制系统的设计[D].曲阜师范大学,2012.郑文刚,赵春江,王纪华.温室智能控制的研究进展[J].农业网络信息,2004(02):8-11.唐勇.中压开关柜温湿度在线监测系统设计[J].新型工业化,2019,9(02):87-89.程仕发.智能温室大棚监控系统的研究与设计[D].山西:太原理工大学,2020.金钰.工业控制计算机在自动化温室控制中的应用[J].工业控制计算机,2000(01):16-18.杜辉,陈教料.基于蓝牙技术的分布式温室监控系统设计研究[J].自动化仪表,2005(03):21-23+29.唐林林.蔬菜大棚的智能监控系统的设计与实现[D].山东大学,2010.李海南.温室蔬菜大棚监控系统研究与实现[D].吉林大学,2015.GuoQingChen.MineMulti-PointTemperatureMeasurementandControlNetworkRemoteMonitoringSystemResearch[J].AppliedMechanicsandMaterials,2014,3629.Xue-HanGao,Jian-JunXu,Li-MeiYan.VegetableGreenhousesIntelligentTemperatureControlSystem[J].AdvanceJournalofFoodScienceandTechnology,2016,10(1).张毅刚,王少军,付宁.单片机原理及接口技术[M].人民邮电出版社:,201501.333.刘鸣,车立新,陈兴梧,赵煜.温度传感器DS18B20的特性及程序设计方法[J].电测与仪表,2001(10):47-51.樊强,张敏,李霞.基于DS18B20的温度采集系统设计与实现[J].农机化研究,2011,33(12):161-164.柴睿.液压冲击器的智能控制系统研究[D].上海交通大学,2009.朱江.基于支持向量机的煤矿瓦斯突出预测系统的研究[D].安徽理工大学,2014.李多,陈军.基于单片机串口实现1-Wire总线通信的方法[J].微型机与应用,2012,31(11):22-24.

附录：蔬菜大棚温度检测系统硬件电路设计：蔬菜大棚温度检测系统从机一主函数：voidmain(void){ uintk;ucharL; ucharH; ucharnumber;BEEP=1; C1=0;LCD_Initial();UARTinit();//串口初始化writestring(0,0,"SearchSensor");delayms(200);number=FindDevices(Ds18b20Rom);writestring(0,0,"Searchsensors");writeChar(7,0,number/10+'0');//‘0’表示0x30writeChar(8,0,number%10+'0');delayms(200);writestring(0,0,"");for(k=0;k<number;k++){StartDs18b20(&Ds18b20Rom[k][0])//引用的参数在该函数中不会产生临时变量} H=read_e2p(0x25);L=read_e2p(0x26);writestring(0,0,"");writestring(0,1,"");writestring(0,0,"HistoricalRecord");writestring(2,1,"LOW");writestring(8,1,"TOP");writeChar(5,1,L/10+'0');writeChar(6,1,L%10+'0');writeChar(11,1,H/10+'0');writeChar(12,1,H%10+'0');delayms(500); while(1) { Alarm(); SetFun(); clean(); if((d==0x05)||(q==0x04)) { C1=1; write_e2p(AlarmTempTop,0x25); write_e2p(AlarmTempLow,0x26); writestring(0,0,""); writestring(0,1,""); clean(); if(Set==0) //设置键没有按下 { for(k=0;k<number;k++) { StartDs18b20(&Ds18b20Rom[k][0]); //开始温度转化 ReadDs18b20(&Ds18b20Rom[k][0]); //读取温度值 writestring(0,0,""); writestring(0,1,""); writestring(0,0,"A1"); TP1=TZ;tf1=tflag; writeChar(2,0,tflag); writeChar(3,0,TZ/10%10+'0'); writeChar(4,0,TZ%10+'0'); writeChar(5,0,'.'); writeChar(6,0,TD+'0'); writestring(0,1,""); writestring(0,2,""); writestring(2,1,"LOW"); writestring(10,1,"TOP"); DispAlData(); delayms(500); dispBuf[0]=TZ/10%10+'0'; dispBuf[1]=TZ%10+'0'; dispBuf[2]='.'; dispBuf[3]=TD+'0'; dispBuf[4]='\0'; sendstring(dispBuf); delayms(500);