模内成型新技术 IMB(In Moding Bend).ppt

1、A,1,INNOX PET Film Presentation 2010.6.4.,A,2,1. Product series-IML/IMB,A,3,Innox PET series formability,Pencil hardness,Formability,Plain PC,ES1-TS,BND1-TS,EMB1-TS,STR1-GX,A,4,IMB,In Molding Bend,模内成型,A,5,1. Printing Process,1). Automatic Roll to Roll Screen Printing,A,6,2. Injection Moulding Proce

2、ss1,1). Ejector pins retract,2). The feeding sensor detects the film supply ,A,7,2. Injection Moulding Process 2,1). Film is clamped,A,8,2. Injection Moulding Process 3,1). Heater enters,2). Heater leaves,A,9,2. Injection Moulding Process 4,2). Suction of the film starts,A,10,2. Injection Moulding P

3、rocess 5,1). Mold close,2). Molten resin is injected into the mold,A,11,2. Injection Moulding Process 6,1). Robot arm enters,2). Ejector pins eject part from mold,3). Release Clamp system, Cast off carrier film is wound by a retraction unit,A,12,2. Product series-TP/IMR,A,13,NBND1 series,1. 主要特征 极好的

4、抗彩虹性能 独一无二的触感，特别适合于触摸屏面板笔写输入 杰出的耐磨；耐刮伤和耐化学试剂性能 铅笔硬度3H 极好的油墨兼容性 厚度: 188m 2. 适用于 触摸屏面板和手机镜片等浅成型要求的产品,A,14,A,15,PRT1-TK,1. 特征 厚度: 250um 可在硬涂层面印刷UV油墨. 极好的耐磨；耐刮伤和耐化学试剂性能 铅笔硬度 2H-3H 极好的油墨兼容性 2. 应用 手机平板按键和薄膜开关等电子产品。,A,16,A,17,ARS-E105TG-100,1. 特征 厚度: 100um 极好的减反射和抗静电功能. 良好的耐磨；耐刮伤和耐化学试剂性能 铅笔硬度 1H 杰出的附着性能. 2. 应用 摄像头；PDA； 汽车仪表盘等电子产品。,A,18,A,19,ARS-E105TG-100 Anti-Reflective, Anti-Static, Coating Film with PSA,A,20,I