《美容医疗机构、医疗美容科(室)基本标准(2011版征求意见稿)》

1、1, and prepared according to 1.1, and thermal power engineering started debugging work provides 1.2, and thermal power power plant construction engineering started and the completed acceptance procedures 1.3, and thermal power unit started steam Blowpipe guide is 1.4, and thermal power engineering a

2、djustment try shipped quality test and the evaluation standard 2, and #1 furnace started debugging organization measures and the related provides 2.1, and organization Division: for guarantee wide up thermal power plant #1 furnace started debugging and the part steam machine system of smooth voted s

3、hipped, special established #1 furnace try shipped professional group, members following: leader: Deputy Leader: supervision: crew: wide up try shipped personnel: wide up acceptance personnel: 2.2, and debugging, and try shipped content: boiler auxiliary machine Division debugging electric dust of D

4、ivision try turned and the debugging baking furnace Cook furnace boiler rushed tube, and blow sweep security door check 2.3, and operation provides and the Division: #1 furnace debugging, and try shipped by #1 furnace try shipped professional group requirements for, which single try turned and Divis

5、ion try shipped by xD three company led is responsible for. all moving operation operation must be in strict accordance with the prior authorization of the #1 boiler commissioning professional working group, and after starting, the test command-approved #1 furnace steps in the test programme, event

6、of temporary changes be reported to headquarters approval. commissioning, trial operation process is required for each project by Northwest electric power construction company ready equipment installation records, and fill in the test application form, the a and b sides after passing the checks, fil

7、l in partial commissioning checking before a visa, reported head of the approval, carried out by the leader of unified command. About each action are made by the leader of a unified command, operation after the report to the team leader. Without the Directors consent shall not unilaterally make any

8、startup operation, such as single operations, who is responsible for all security responsibilities, with no ties to the other side. all before the first turn of the motor, must be approved by both parties a common roll insulation measurement can be carried out properly. After the end of each project

9、 commissioning, fill in partial acceptance visa trial shipments. As motor in rotating equipment commissioning test switch and mechanical part of their trial cannot continuously, this is considered two test projects shall be carried out according to the above four steps. 2.4, and attached work votes

10、issued people, and license people, and work head list: party electrical first species, and second species work votes license people list: party engine work votes license people list: b electrical first species, and second species work votes issued people: b hot control professional issued people lis

11、t: b hot control professional work head: b steam machine professional work votes issued people: b steam machine professional work votes head: b boiler professional work votes issued people: b boiler professional work votes head: attached: about personnel of contact phone party b Division 3, boiler a

12、uxiliary equipment debugging scenarios 3.1, send, induced draft fan try turned 3.1.1, try turning the former requirements of: 3.1.1.1, fan body and motor installed, based the second Grouting ends, and the concrete strength is up. 3.1.1.2, coupling the Centre has finished aligning standards, approved

13、 visa. 3.1.1.3, bearing clearance normal outer rims and bearing clearance is up to standard. 3.1.1.4, Benton美容医疗机构、医疗美容科（室）基本标准（2011版）（征求意见稿）美容医院一、 床位、牙椅和手术床住院床位总数至少10张，美容治疗床至少12张，麻醉恢复床至少2张；设美容牙科的至少有综合治疗椅1台；手术床至少4张。二、 科室设置（一）临床科室：至少设有美容牙科、美容皮肤科、美容中医科中的1个科以及美容外科、麻醉科。（二）医技科室：至少设有药剂科、检验科（可含放射科）、手术室、消毒供

14、应室、病案资料室。其中，临床检验、消毒供应等与其他合法机构签订相关服务合同，由其他机构提供服务的，可不设置检验科和消毒供应室等。（三）职能管理科室：至少设有医疗质量管理部门、护理部、医院感染管理科、器械科、病案（统计）室、信息科。（四）其他：必设美容咨询设计室。 三、 人员（一）每床(椅)至少配备1.1名相关专业卫生技术人员。（二）每床(椅)至少配备0.55名护士。（三）至少有3名具有相关专业副高级以上专业技术任职资格的美容主诊医师。（四）至少有1名中级以上专业技术任职资格的麻醉医师。（五）至少3名中级以上专业技术任职资格、符合医疗美容服务管理办法中规定的护士。（六）每个临床科室至少有1名本专

15、业中级以上专业技术任职资格的美容主诊医师。（七）每个医技科室至少有1名具有相应专业中级以上专业技术职务任职资格的人员。四、 医疗用房（一）每病床建筑面积至少60平方米,医疗用房至少1500平米。（二）病房每床净使用面积至少6平方米。（三）每牙科综合治疗椅建筑面积至少40平方米，诊室每牙科治疗椅净使用面积至少6平方米。（四）每美容治疗床建筑面积至少20平方米，每美容治疗床净使用面积至少6平方米。五、 设备（一）基本设备1.抢救监护：至少配备呼吸机、生命体征监测设备（心电图、脉搏、血压、血氧分压、二氧化碳分压）、负压吸引器、体外除颤器。2.手术室：至少配备麻醉机、氧气供应、吸脂机、无影灯、紫外线消

16、毒灯、高压蒸气灭菌设备、洗衣机、器械柜、手术转运车和过床器、备用发电机、自动灭火装置、应急照明设备、电凝器以及美容外科手术相应的手术器械。3.美容牙科：至少配备喷砂洁牙器、光固化治疗机、正颌外科器械、X光牙片机、银汞搅拌机、技工设备、口腔全景X光机、牙科必备的消毒设备。4.美容皮肤科：至少配备激光机、电子治疗机、皮肤磨削机、离子喷雾器、文眉机、皮肤测试仪、消毒柜。5.检验科需要的配套设备。医学检验与其他合法机构签订相关服务合同，并由其提供服务的，可不配备检验设备。6.信息化设备：在住院部、门诊部等各临床、医技、职能等部门以及信息科配置自动化办公设备，保证医院信息的统计和上报。（二）病房每床单元

17、设备，与二级综合医院相同。（三）具有与开展的诊疗科目相应的其他设备。六、制定各项规章制度，包括术前检查和准备制度、医护人员定期抢救训练制度；制定人员岗位责任制;有国家制定或认可的医疗美容技术操作规范、医院感染管理规范、消毒技术规范，并成册可用；制订急救病人转诊方案。七、注册资金到位，保证医院的运营。具体数额由各省、自治区、直辖市卫生行政部门确定。医疗美容门诊部一、床位、牙椅和手术床美容治疗床至少2张，观察床至少2张，麻醉恢复床至少1张；设美容牙科的至少有综合治疗椅1台；手术床至少3张。二、科室设置（一）临床科室：至少设有美容牙科、美容皮肤科、美容中医科中的1个科以及美容外科、麻醉科。（二）医技

18、科室：至少设有药剂科、检验科、病案资料室、手术室。其中，临床检验等与其他合法机构签订相关服务合同，由其他机构提供服务的，可不设置检验科等。（三）职能科室：至少设有医疗质量管理部门、信息科等。（四）其他：必设美容咨询室。三、人员（一）每张手术床至少配备2.4名相关专业卫生技术人员。（二）每张观察床、牙科综合治疗椅至少配备1.03名相关专业卫生技术人员和0.4名护士。（三）至少有6名执业医师，其中至少1名为中级以上专业技术任职资格的麻醉医师，至少2名具有相关专业副高级以上专业技术任职资格的美容主诊医师。（四）至少1名中级以上专业技术任职资格、符合医疗美容服务管理办法中规定的护士。（五）每个临床科室

19、至少有1名本专业中级以上专业技术任职资格的美容主诊医师。（六）每个医技科室至少有1名具有相应专业中级以上专业技术职务任职资格的人员。四、医疗用房（一）建筑面积至少500平方米。（二）每室独立。（三）每间手术室净使用面积至少20平方米。（四）诊室每美容治疗床、牙科综合治疗椅净使用面积至少6平方米。（五）每张观察床净使用面积至少20平方米。（六）每麻醉恢复床净使用面积至少20平方米。五、设备（一）基本设备1.抢救监护：至少配备呼吸机、生命体征监测设备（心电图、脉搏、血压、血氧分压、二氧化碳分压）、负压吸引器、体外除颤器。2.手术室：至少配备麻醉机、氧气供应、吸脂机、无影灯、紫外线消毒灯、高压蒸气灭

20、菌设备、洗衣机、器械柜、手术转运车和过床器、备用发电机、自动灭火装置、应急照明设备、电凝器以及美容外科手术相应的手术器械。3.美容牙科：至少配备喷砂洁牙器、光固化治疗机、正颌外科器械、X光牙片机、银汞搅拌机以及牙科必备的消毒设备。4.美容皮肤科：至少配备激光机、电子治疗机、皮肤磨削机、离子喷雾器、文眉机、皮肤测试、消毒柜。5.检验科需要的配套设备。医学检验与其他合法机构签订相关服务合同，并由其提供服务的，可不配备检验设备。6.信息化设备：在各临床、医技、职能等部门以及信息科配置自动化办公设备，保证门诊部信息的统计和上报。（二）具有与开展的诊疗科目相应的其他设备。六、制定各项规章制度，包括术前检

21、查和准备制度、医护人员定期抢救训练制度；制定人员岗位责任制;有国家制定或认可的医疗美容技术操作规范、医院感染管理规范、消毒技术规范，并成册可用；制订急救病人转诊方案。七、注册资金到位，保证医院的运营。具体数额由各省、自治区、直辖市卫生行政部门确定。医疗美容诊所一、床位、牙椅和手术床至少设有美容治疗床2张，设美容外科的至少设手术床1张及观察床2张，舍美容牙科的至少设牙科综合治疗椅1台。 二、科室设置（一）临床科室：至多设有美容外科、美容皮肤科、美容牙科、美容中医科中2个科目。（二）医技科室：根据开设的科目，设置相应的医技科室。（三）美容外科：至少设有手术室、治疗室、观察室。（四）美容牙科：至少设

22、有诊疗室。（五）美容皮肤科：至少设有美容治疗室。（六）美容中医科：至少设有中医美容治疗室。三、人员每个科目至少有1名本专业中级以上专业技术任职资格的美容主诊医师；至少有1名具有2年以上护理工作经历，经过医疗美容护理专业培训或进修并合格，或已从事6个月以上医疗美容临床护理工作的注册护士。四、医疗用房（一）建筑面积至少100平方米。（二）每室必须独立。（三）手术室净使用面积至少20平方米，或每美容治疗床、牙科综合治疗椅净使用面积至少6平方米。五、设备（一）基本设备1.美容外科（1）抢救监护：至少配备呼吸机、生命体征监测设备（心电图、脉搏、血压、血氧分压）、负压吸引器、体外除颤器。（2）手术室：至少

23、配备氧气供应、无影灯、紫外线消毒灯、高压蒸气灭菌设备、洗衣机、器械柜、手术转运车和过床器、灭火装置、应急照明设备、电凝器及美容外科手术相应的手术器械。 （3）信息化设备：至少配备1台可以上互联网的计算机，保证诊所信息的统计和上报。2.美容皮肤科至少配备皮肤磨削机、离子喷雾器、多功能美容仪、激光机或电子治疗机、超声波、治疗仪、消毒柜、文眉机。3.美容牙科同口腔诊所要求。（二）具有与开展的诊疗科目相应的其它设备，具有上网功能的计算机，保证诊所信息的统计和上报。六、制定各项规章制度，包括术前检查和准备制度、医护人员定期抢救训练制度；制定人员岗位责任制;有国家制定或认可的医疗美容技术操作规范、医院感染

24、管理规范、消毒技术规范，并成册可用；制订急救病人转诊方案。七、注册资金到位，保证医院的运营。具体数额由各省、自治区、直辖市卫生行政部门确定。医疗美容科(室)一、床位、牙椅和手术床美容治疗床至少4张，观察床至少1张；设美容牙科的至少有综合治疗椅1台；手术床至少1张。二、 科目设置（一）临床科室：至少设有美容外科、美容皮肤科、美容牙科、美容中医科4个科目中的2个科目。（二）医技科室可与医疗机构共用。（三）其他：至少设有美容咨询室和美容治疗室。三、人员（一）每张手术床至少配备2.4名相关专业卫生技术人员。（二）每张观察床、牙科综合治疗椅配备1.03名相关专业卫生技术人员和0.4名护士。（三）每科目至

25、少有1名本专业中级以上专业技术任职资格的美容主诊医师，以及1名中级以上专业技术任职资格、符合医疗美容服务管理办法中规定的护士。四、医疗用房（一）建筑面积至少lOO平方米。（二）每室必须独立。（三）手术室净使用面积至少20平方米。（四）诊室每美容治疗床、牙科综合治疗椅净使用面积至少6平方米。（五）应远离传染病诊疗区。五、设备（一）基本设备1.美容外科：手术床和相应的成套美容外科手术器械、电凝器、吸引器、紫外线消毒灯、无影灯、必备的消毒灭菌设备。2.美容皮肤科：离子喷雾器、多功能美容仪、皮肤磨削、文眉机、激光治疗机、必备的消毒灭菌设备。3.美容牙科：牙科必备消毒设备、电冰箱。（二）具有与开展的诊疗

26、科目相应的其它设备，具有上网功能的计算机，保证诊所信息的统计和上报。六、制定各项规章制度，包括术前检查和准备制度、医护人员定期抢救训练制度；制定人员岗位责任制;有国家制定或认可的医疗美容技术操作规范、医院感染管理规范、消毒技术规范，并成册可用；制订急救病人转诊方案。3.3.3.5, measure the length of insurance, a record, for when the next maintenance reference. 3.3.3.6, ready to install, try turning acceptance visa records archive for

27、 safekeeping. 4, partial transfer test and commissioning programme that is dusting 4.1, try turning the former requirements of 4.1.1, import and export of dust flue is installed. 4.1.2, ESP acceptance visa framework, shell is installed. 4.1.3, outdoor rooftop installation finished welding, do not le

28、ak. 4.1.4, platforms, stairs and railings are all installed. 4.1.5, cathode and anode is installed, the same polar distance guarantees 400mm 5mm. And acceptance of visa. 4.1.6, Yang Jizhen install, vibration reducer oil, oil level is clear and correct. Universal joint into the butter. 4.1.7, the cat

29、hode vibrating installation, initial running in off-axis installed, vibration reducer oil, oil level is clear and correct. Universal joint into the butter. 4.1.8, air distribution, deflector installed, fixed by the prison. 4.1.9, entry boxes installed, external insulation vases clean, no defects suc

30、h as cracks, porcelain, and pressure test. 4.1.10, cathode vibrating wall insulation casing and the insulation gland plate complete gap correctly. 4.1.11, the town changes the tubing is installed, access to the fuel tank. 4.1.12 ESP body lighting installed and put into use. 4.1.13, insulation work a

31、ll over. 4.2, transfer and commissioning test 4.2.1, first start the Yang for vibration motors to determine direction, turn correct try 2H. Green run by Yang vibrating strike hammers, check crank should rotate, flip, flexible, and hitting the hip bar Center, gearbox functioning, no oil leakage, bear

32、ing temperature does not exceed 80 c. Motor current does not exceed the rated current. 4.2.2, start the cathode vibrating confirm turn to determine turn to try to go after 2H. Try to go check the cathode when vibrating strike hammers should be flexible rotation, flipping, and hitting on the cathode framework, gearbox functioning, no oil leakage, bearing temperature does not exceed 80 c. Motor current does not exceed the rated current. 4.2.3, try to go after passing the yin and Yang Jizhen hammer and yin and Yang Jizhen