过程工艺工程 师求职简历

-精选财经经济类资料- -最新财经经济资料-感谢阅读- 1 过程工艺工程师求职简历 “MsoNormal” style=“求职简历 基本信息： “MsoNormal” style=“ “MsoNormal” style=“姓 名：孙 昊天 性别：男 出生年月：1984 年 11 月 28 日 身高：176cm “MsoNormal” style=“现在住址：* 婚姻状况：未婚 “MsoNormal” style=“毕业院校：* 大学 专业：机械设计制造及其自动 化 联系电话：* 电子信箱：* “MsoNormal” style=“应聘岗位：过 程工艺工程师 -精选财经经济类资料- -最新财经经济资料-感谢阅读- 2 “MsoNormal” style=“ “MsoNormal” style=“教育培训： 2004.82008.6 *省*大学 机械设 计专业 2001.82004.6 *省*县高级中学 1998.82001.6 *省*县太平中学 “MsoNormal” style=“工作经历： 2008 年 8 月至今 任职于一汽* 汽车有限公司 简介： “MsoNormal” style=“一、08 年 8 月 08 年 12 月，在各生产车间进行实 习。熟悉冲压、涂装、焊装、 “MsoNormal” style=“装配车间的汽 车生产工艺。 “MsoNormal” style=“二、08 年 12 月10 年 1 月，在生产部从事生产控 制、精益生产方式的推进工 “MsoNormal” style=“作。曾跟随一 汽采购部改善专家对*动力和*通机进 行了半个月的现场改善和指导。熟练掌 握精益生产方式的基础知识，掌握作业 -精选财经经济类资料- -最新财经经济资料-感谢阅读- 3 手顺书、作业要领书、工序能力表等的 编制方法。对各车间进行现场 5S 管理， 负责日常改善工作。 “MsoNormal” style=“三、10 年 1 月 现在，任装配车间现场工程师，负 责现场工艺管理和标准作业的制定维护 工作。参与了车间节拍变更工作，从人、 机、料、法等环节对工程布置进行制定， 并进行对策的跟踪、实施和确认。对装 配车间 15 个工位的标准作业进行了修 订。对现场作业、设备保障能力、关键 点保证、人员资质、工件供应情况进行 了审核。共提出了 18 项改进要求，制 定了 10 项措施方案，有效的提高了工 区的可动率和过程质量保证能力。 “MsoNormal” style=“ “MsoNormal” style=“个人概述： “MsoNormal” style=“诚实、守信、 思维敏捷，学习能力强，能吃苦，具有 良好的团队合作精神。由于日常工作经 常和日本的工作人员接触，学习了丰田 人员认真、细致的工作方法，养成了良 -精选财经经济类资料- -最新财经经济资料-感谢阅读- 4 好的工作习惯，拥有较好的知识结构。 “MsoNormal” style=“ align=“center”Resume “MsoNormal” style=“Basic information: “MsoNormal” style=“ “MsoNormal” style=“Name: Sun Haotian Gender: Male “MsoNormal” style=“DOB: November 28, 1984 Height: 176cm “MsoNormal” style=“Present address: East Hengshan Road, Fengman District, Jilin City Marital status: Single “MsoNormal” style=“Graduation school: Yanbian University “MsoNormal” style=“Major: Mechanical Layout, Manufacturing and Automation Tel.:* E-mail: * “MsoNormal” style=“Position to be appointed: Process technology engineer -精选财经经济类资料- -最新财经经济资料-感谢阅读- 5 “MsoNormal” style=“ “MsoNormal” style=“Education and training: 2004.82008.6, Jilin Province Yanbian University, majoring in mechanical layout 2001.82004.6, studied at the Jilin Province Lishu County Senior Middle School 1998.82001.6, studied at the Jilin Province Lishu County Taiping Middle School “MsoNormal” style=“Working experience: Aug. 2008now, I have been working at the Jilin Automobile Co., Ltd. of FAW Introduction: “MsoNormal” style=“I. Aug. 2008- Dec. 2008，I practiced in all production workshops to know about stamping, painting and welding and process technology of auto of fitting shop. “MsoNormal” style=“II. Dec. 2008- -精选财经经济类资料- -最新财经经济资料-感谢阅读- 6 Jan. 2010, I was engaged in production control in production department and promotion of lean production. I followed improvement experts who have made site improvement and guidance on Dongan Auto Engine and Shulan General Machinery for half a month. I could master in elementary knowledge of lean production. I could grasp preparation methods of operation manual and essentials book and working procedure capacity list. And I was in charge of site 5S management of all workshops and daily improvement. “MsoNormal” style=“III. Jan. 2010- now, I have been working as site engineer of fitting shop in charge of site technology management and maintenance of standard operation. I participated in change of circle time of workshop and establishment from circles such as workers, machine, stuff to -精选财经经济类资料- -最新财经经济资料-感谢阅读- 7 project layout and made follow-up, implementation and confirmation of policies. I amended standard operations of 15 stations of fitting shop and verified the site operation, equipment security capacity, key points guarantee and personnel qualification and workpiece supply. I submitted 18 improvement requirements and constituted 10 measures which effectively enhanced availability rate of work area and process quality assurance ability. “MsoNormal” style=“ “MsoNormal” style=“My summary: “MsoNormal” style=“I am honest and faithful and smart. I have strong study ability and could bear hardships and have good group cooperation spirit. For contacting Japanese workers in daily work, I have learnt earne