《avaya计费设置》word版.doc

shaka_dnS8700的计费如何设置刚给一个客户装完S8700,因为计费软件还没到,过几天就要去调计费软件了,想请教一下,8700里面如何做计费?第一步:在CH SYS CDR里定义从CDR输出(如下)change system-parameters cdr Page 1 of 2 CDR SYSTEM PARAMETERSNode Number (Local PBX ID): 1 CDR Date Format: month/day Primary Output Format: customized Primary Output Endpoint: CDR1 Secondary Output Format: unformatted Secondary Output Endpoint: CDR2 Use ISDN Layouts? n Use Enhanced Formats? n Condition Code T For Redirected Calls? nModified Circuit ID Display? n Remove # From Called Number? y Record Outgoing Calls Only? n Intra-switch CDR? ySuppress CDR for Ineffective Call Attempts? y Outg Trk Call Splitting? y Disconnect Information in Place of FRL? n Outg Attd Call Record? y Interworking Feat-flag? nForce Entry of Acct Code for Calls Marked on Toll Analysis Form? n Calls to Hunt Group - Record: group-extRecord Called Vector Directory Number Instead of Group or Member? nRecord Agent ID on Incoming? y Record Agent ID on Outgoing? y Inc Trk Call Splitting? y Inc Attd Call Record? nRecord Non-Call-Assoc TSC? y Call Record Handling Option: warning Record Call-Assoc TSC? y Digits to Record for Outgoing Calls: dialed Privacy - Digits to Hide: 0 CDR Account Code Length: 15第二步:该怎么定义IP地址什么的,请高手指点!1.在node-name ip中添加CDR的IP地址display node-names ip IP NODE NAMES Name IP AddressCDR-PC 192.168.123.12CTI-Server 192.168.123.101clan 192.168.123.99default 0.0.0.0procr 192.168.1.12.在ip-service中添加CDRdisplay ip-services Page 1 of 4 IP SERVICESService Enabled Local Local Remote RemoteType Node Port Node PortSAT y clan 5023 any 0DLG y clan 5678CDR1 clan 0 CDR-PC 6000isplay ip-services Page 3 of 4 SESSION LAYER TIMERSService ReliablePacket Resp Session ConnectSPDUConnectivity Type Protocol Timer Message Cntr Cntr TimerCDR1 n 30 3 3 60这是一个供应商发给我的avaya交换机计费设置信息。有两点需要注意：1、 接收计费信息的计算机为TCP（Server），在CDR-tty中设置端口为TCP/IP（Server）模式，IP地址为计算机IP，端口为50000（取大一点，与系统ip不冲突）。Avaya交换机计费输出为TCP/IP客户端，需要在CDR设置中指定TCP/IP服务器地址（就是计费计算机IP地址）、端口号（就是计费计算机TTY设置的端口号）2、 交换机计费可以设置为没有协议的Service ReliablePacket Resp Session ConnectSPDUConnectivity Type Protocol Timer Message Cntr Cntr TimerCDR1 n 30 3 3 60也可以设置为有协议的Service ReliablePacket Resp Ses