apachephpmysql源代码编译安装配置.docx

【需要理解-lamp调用过程】Client _IE - linux - apache - php做逻辑处理- mysqlApache(libphp5.so) - php脚本程序(mysql.so) - mysql1， 安装apache请参照：chap5 web服务器安装与配置(1).txt2， 安装mysql请参照：chap07 mysql源代码安装步骤.txt3， 安装php扩展rootlocalhost # tar zxf libmcrypt-2.5.8.tar.gz -C /usr/src/ rootlocalhost # cd /usr/src/libmcrypt-2.5.8/ rootlocalhost libmcrypt-2.5.8# ./configure rootlocalhost libmcrypt-2.5.8# make & make install rootlocalhost libmcrypt-2.5.8# ln -s /usr/local/lib/libmcrypt.* /usr/lib/ rootlocalhost # tar zxf mhash-.tar.gz -C /usr/src/ rootlocalhost # cd /usr/src/mhash-/ rootlocalhost mhash-# ./configure rootlocalhost mhash-# make & make install rootlocalhost mhash-# ln -s /usr/local/lib/libmhash* /usr/lib/ rootlocalhost # tar zxf mcrypt-2.6.8.tar.gz -C /usr/src/ rootlocalhost # cd /usr/src/mcrypt-2.6.8/ rootlocalhost mcrypt-2.6.8# ./configure rootlocalhost mcrypt-2.6.8# make & make install 【Apche - php - mysql配置过程】l 编译安装php5l httpd.conf配置调整，让apache支持php (apache-php)l php-mysql 【一， 编译安装php5】rootlocalhost php-5.3.6# tar zxf php-5.3.6.tar.gz C /usr/local/rootlocalhost php-5.3.6# cd /usr/local/php-5.3.6rootlocalhost php-5.3.6# ./configure -prefix=/usr/local/php5 -with-apxs2=/usr/local/httpd/bin/apxs -with-mysql=/usr/local/mysql/ -with-config-file-path=/usr/local/php5 rootlocalhost php-5.3.6# make & make install拷贝php配置模板文件php.ini到php目录cp /usr/src/php-5.3.6/php.ini-development /usr/local/php5/php.ini【二，httpd.conf配置调整，让apache支持php】(1) vim /usr/local/httpd/conf/httpd.conf/不需要修改的配置省略LoadModule php5_module modules/libphp5.so #确认/usr/src/httpd/modules/libphp5.so文件存在AddType application/x-httpd-php .phpDirectoryIndex index.php index.html #此项如果存在则进行修改即可重启httpd使配置生效service httpd restart(2)验证httpd-php是否正常准备测试页面vim /usr/local/httpd/htdocs/index.php (3)查看本机ip地址(4)测试httpd-php是否正常使用浏览器访问81/index.php(此处修改成自己的ip)返回结果如下，说明配置正确【三， php-mysql】(1) 测试php-mysql是否正常检查php是否支持连mysqlrootlocalhost # /usr/local/php5/bin/php -m | grep mysql(2) 新建一个php连mysql的脚本文件/usr/local/httpd/htdocs/conndb.php文件，注意这个文件放在apache网站根目录下。内容如下：【测试整体httpd-php