追信令流程

1、手机PS上网追信令流程：lh mp te config -run bus_send bus_receive NBAP_ASNlh mp te config -run bus_send bus_receive RANAP_ASNlh mp te config -run bus_send bus_receive RRC_ASN在rnc上输入上述3条命令，然后输入mon-mon mod根据最后给出的路径，单独开一个cigwin窗口，进入decoder目录下面，按照下面的格式输入： 提示的路径及端口号 |tee ./文件名.raw | ./decoder.pl | tee ./文件名.dec | ./flow.pl -colour | tee ./文件名.flw2、PS 2/3G切换测试Trace流程：（追UE消息）路测的同时请抓取以下trace：在RNC中输入（imsi号为测试手机号码的imsi）：ueenable imsi 46000xxxxxx bus_send bus_receive trace1 trace3mon-mon mon lh modact(all RBS MOUDLE)注：在MOSHELL里用指令bo查看所有机框板子状态，用指令pr iublink=RBSID查看该基站属于的RNCmodule类型。在新开cygwin窗口，进入decoder目录下面，根据mon命令显示的路径输入：/home/yourid/moshell/monitor6054RNCip（如192.168.0.1） 33079（根据mon显示的端口号码） | tee ./文件名.raw | ./decoder.pl | tee ./文件名.dec | ./flow.pl -colour | tee ./文件名.flw测试结束后，在RNC中输入uedisable all关闭decoder操作在RNC中输入：lh mod te default3、用MOSHELL取kget all 文件。首先要打开MOMparsemom /home/youruserid/moshell/jarxml/tdrnc_node_mim_complete_A_20_1_CPP61LSV31.xml 然后用命令：kget all取出所有RNC配置信息。4、追NBAP消息lhsh te e bus_send bus_receive NBAP_ASNlhsh te e bus_send bus_receive RANAP_ASNlhsh te e bus_send bus_receive RRC_ASNlhsh te e bus_send bus_receive Ans_aal2ap_proc全网追踪lh modact te e bus_send bus_receive NBAP_ASN lh modact te e bus_send bus_receive RANAP_ASN lh modact te e bus_send bus_receive RRC_ASN lh modact te e bus_send bus_receive Ans_aal2ap_procUE Tracelh modact teeallUEH_EXCEPTION lh modact teconfig-runbus_sendbus_receiveNBAP_ASNlh modactteconfig-runbus_sendbus_receiveRANAP_ASNlh modactteconfig-runbus_sendbus_receiveRRC*ueenableimsixxxxxxxxxxxxxxxxbus_sendbus_receivetrace1trace3trace5trace6trace7 mon-mon modacttrace跟踪完后，运行：lh all te default 关闭traceUE Trace示例：WXRNC01 ueenable imsi 460023618218442（测试手机的IMSI） bus_send bus_receive trace1 trace3 trace5 trace6 trace7091018-16:32:23 5.31.240.1 7.1p TDRNC_NODE_MODEL_A_22_0 stopfile=/tmp/3768$ ueenable imsi 460023618218442 bus_send bus_receive trace1 trace3 trace5 trace6 trace70: imsi: imsi=460023618218442 check error info trace1 trace3 trace5 trace6 trace7 bus_send bus_receive interface object$ WXRNC01 mon-091018-16:32:54 5.31.240.1 7.1p TDRNC_NODE_MODEL_A_22_0 stopfile=/tmp/3768$ lhsh 001000 tm -disconnectAll monitored boards are disconnected and Target Monitor has shut down.$ WXRNC01 mon+ mod2 （2：为该基站所属的RNC Module值，通过iublink得到，pr iublink或者get iublink= ）091018-16:33:17 5.31.240.1 7.1p TDRNC_NODE_MODEL_A_22_0 stopfile=/tmp/3768* Opening new handle:$ lhsh 001000 tm -tcp -win 1New monitor router process 0x492231 is started and listening to port 33077.To attach link handlers, use handle 1.New monitor router process 0x49222a is started and listening to port 33079.To attach link handlers, use handle 3.* Attaching boards to handle:$ lhsh 001000 tm -attach 3 011300To start the monitor client, run the following command (type h mon for more info):/home/Administrator/moshell/monitor6054 5.31.240.1 33079$moncommand = /home/Administrator/moshell/monitor6054 5.31.240.1 33079根据moncommand，新开一个cygwin窗口，输入cd decoder进入decoder目录下面，再：/home/Administrator/moshell/monitor6054 5.31.240.1 33079 | ./decoder.pl | tee ./log/WXTD2050C_091018.dec | ./flow.pl -colour |tee ./log/WXTD2050C_091018.flo.log后面为你要保存的文件名称追完trace后，在RNC中输入 uedisable all 关闭decoder操作在RNC中输入： lh mod te default在RNC中输入： uestatus all 查看RNC中ue trace状态为活的手机$ uestatus all0: imsi: imsi=460023618218442 check error info trace1 trace3 trace6 trace7 bus_send bus_receive interface object1: imsi: imsi=460023618916615 check error info trace1 trace3 trace6 trace7 bus_send bus_receive interface objectWXRNC01 uedisable all091018-17:01:09 5.31.240.1 7.1p TDRNC_NODE_MODEL_A_22_0 stopfile=/tmp/3768$ uedisable alltrace condition 0 disabled.ueTrace is passive$2009/10/23 1. Get the log after enable the following traces in RNC and check whether the cell is delete and create automatically.lhsh xxxxxx te e bus_send bus_receive RRC_ASNlhsh xxxxxx te e bus_send bus_receive RANAP_ASNlhsh xxxxxx te e bus_send bus_receive NBAP_ASNlhsh xxxxxx te filter set 18 NBAP_ASN*lhsh xxxxxx te e bus_send bus_receive Ans_aal2ap_proclhsh xxxxxx te e all UEH_EXCEPTION xxxxxx means the RNC module which the cell located.新开窗口，cd decoder 然后：/home/XUPF/moshell/monitor6054 5.31.240.1 33079 | tee ./WXTD2038_091023.raw | ./decoder.pl | tee ./WXTD2038_091023.dec | ./flow.pl -colour | tee ./WXTD2038_091023.flw2009/10/271、RNC下抓TRACE：#General Trace Commandlh modmp te e bus_send bus_receive NBAP_ASNlh modmp te e bus_send bus_receive RANAP_ASNlh modmp te e bus_send bus_receive RRC_ASNlh modmp te filter set (18) NBAP_ASNlh modmp te e bus_send bus_receive RAB_ESTlh modmp te e bus_send bus_receive Ans_aal2ap_proclh modmp te e all UEH_EXCEPTION2、针对UE抓TRACE：#IMSI Trace Commandueenable imsi 460021531012360 bus_send bus_receive trace1 trace3 trace6 trace73、NODE B中抓TRACE：#Prepare traceall te default * all te default -restartall te log clear lh ru te d all measProclh ru te e bus_send bus_receive ccielh rax te filter set (323 AND 39 AND 310) ccielh rax te e bus_send bus_receive cciete d all eqcMtrTrMeasRouterCte filter set (323 AND 39 AND 310) CBCIte filter set (3131) CDCI_DBCCte filter set (347) CDCI_TRte filter set (327) AND 328 CDCI_TIMte filter set (18) NBAP*te e bus_send bus_receive CDCI*te e bus_send bus_receive CBCI*te e bus_send bus_receive NBAP*te e bus_send bus_receive BCMI te e bus_send bus_receive LRMI te e bus_send bus_receive EQMIte e bus_send bus_receive Ans_aal2ap_procte e all eqcArhAal2CepCte e all eqcArhAtmCepBoardHandlingCte e all eqcArhAtmResourceHandlerCte e all lrsRcCellCarrierC0te e all eqcRrhRadioResourceHandlerCte e rec_sig send_sig bus_send bus_receive state_change param bcCcmCommunicationContextCte e rec_sig send_sig bus_send bus_receive state_change bcCcmCommunicationContextManagete e rec_sig send_sig bus_send bus_receive state_change bcNphNbapDedicatedCte e rec_sig send_sig bus_send bus_receive state_change param lrsDchRadioLinkSetC#Monitormon 000100 000500 000600 000900#Restore to defaultall te default * all te default -restartall te log clear2009-11-3一. 如果现场发现PDP可以激活，但没有流量的情况，追取以下log,不要全网追,可以专门对这个问题(定点)追.1,MPtraceslhteebus_sendbus_receiveRRC_ASNlhteebus_sendbus_receiveNBAP_ASNlhteebus_sendbus_receiveRANAP_ASNlhteeallUEH_EXCEPTIONlhteeallUE_IU_IF2,PDRtraceslhpdrteetrace2trace3SP_PMlhpdrteetrace3trace5DISCARD追完trace以后,将其全部关掉.在出现PDP激活后没有流量的情况请安排追踪以下trace。追完后，请将RNC上所有trace关掉。1、流量基站对应的ModuleMP板：lhsh xxxxxx te e bus_send bus_receive RANAP_ASNlhsh xxxxxx te e bus_send bus_receive NBAP_ASN lhsh xxxxxx te e bus_send bus_receive RRC*lhsh xxxxxx te e bus_send bus_receive Ans_aal2ap_proc*lhsh xxxxxx te filter set 108AND118 NBAP_ASNlhsh xxxxxx te e all UEH_EXCEPTIONueenable imsi xxxxxxxxxxxxxxx2、在相应ModuelMP板对应的2块SPB板上分别追sp1-4的trace：该SPB板可get ModuelMP看到lhsh 022200/sp1.lnh te e bus_send trace1 trace2 trace3 trace4 trace5 trace6 trace7 RLC_UP_CONTROL_DL_UElhsh 022200/sp2.lnh te e bus_send trace1 trace2 trace3 trace4 trace5 trace6 trace7 RLC_UP_CONTROL_DL_UElhsh 022200/sp3.lnh te e bus_send trace1 trace2 trace3 trace4 trace5 trace6 trace7 RLC_UP_CONTROL_DL_UElhsh 022200/sp4.lnh te e bus_send trace1 trace2 trace3 trace4 trace5 trace6 trace7 RLC_UP_CONTROL_DL_UElhsh 022300/sp1.lnh te e bus_send trace1 trace2 trace3 trace4 trace5 trace6 trace7 RLC_UP_CONTROL_DL_UElhsh 022300/sp2.lnh te e bus_send trace1 trace2 trace3 trace4 trace5 trace6 trace7 RLC_UP_CONTROL_DL_UElhsh 022300/sp3.lnh te e bus_send trace1 trace2 trace3 trace4 trace5 trace6 trace7 RLC_UP_CONTROL_DL_UElhsh 022300/sp4.lnh te e bus_send trace1 trace2 trace3 trace4 trace5 trace6 trace7 RLC_UP_CONTROL_DL_UE lhsh 022200/sp1.lnh te e bus_receive RLC_UP_CONTROL_UL_UElhsh 022200/sp2.lnh te e bus_receive RLC_UP_CONTROL_UL_UElhsh 022200/sp3.lnh te e bus_receive RLC_UP_CONTROL_UL_UElhsh 022200/sp4.lnh te e bus_receive RLC_UP_CONTROL_UL_UElhsh 022300/sp1.lnh te e bus_receive RLC_UP_CONTROL_UL_UElhsh 022300/sp2.lnh te e bus_receive RLC_UP_CONTROL_UL_UElhsh 022300/sp3.lnh te e bus_receive RLC_UP_CONTROL_UL_UElhsh 022300/sp4.lnh te e bus_receive RLC_UP_CONTROL_UL_UE lhsh 022200/sp1.lnh te e all RETRANSM_UElhsh 022200/sp2.lnh te e all RETRANSM_UElhsh 022200/sp3.lnh te e all RETRANSM_UElhsh 022200/sp4.lnh te e all RETRANSM_UElhsh 022300/sp1.lnh te e all RETRANSM_UElhsh 022300/sp2.lnh te e all RETRANSM_UElhsh 022300/sp3.lnh te e all RETRANSM_UElhsh 022300/sp4.lnh te e all RETRANSM_UE lhsh 022200/sp1.lnh te e all DISCARD_UElhsh 022200/sp2.lnh te e all DISCARD_UElhsh 022200/sp3.lnh te e all DISCARD_UElhsh 022200/sp4.lnh te e all DISCARD_UElhsh 022300/sp1.lnh te e all DISCARD_UElhsh 022300/sp2.lnh te e all DISCARD_UElhsh 022300/sp3.lnh te e all DISCARD_UElhsh 022300/sp4.lnh te e all DISCARD_UElhsh 022200/sp1.lnh te e all SP_EXCEPTIONlhsh 022200/sp2.lnh te e all SP_EXCEPTIONlhsh 022200/sp3.lnh te e all SP_EXCEPTIONlhsh 022200/sp4.lnh te e all SP_EXCEPTIONlhsh 022300/sp1.lnh te e all SP_EXCEPTIONlhsh 022300/sp2.lnh te e all SP_EXCEPTIONlhsh 022300/sp3.lnh te e all SP_EXCEPTIONlhsh 022300/sp4.lnh te e all SP_EXCEPTION二. 对于PDP有时可以激活,有时无法激活的情况,请选择一个基站作以下trace,作完后将所有trace关掉(all te default).1,开启UEimsitrace:-ueenableimsitrace6trace7bus_sendbus_receive2,在相应Module的SPB板上开以下trace(如对应Module10的两块SPB为012200和012300):lhsh012200/sp1.lnhueenablealllhsh012200/sp2.lnhueenablealllhsh012200/sp3.lnhueenablealllhsh012200/sp4.lnhueenablealllhsh012300/sp1.lnhueenablealllhsh012300/sp2.lnhueenablealllhsh012300/sp3.lnhueenablealllhsh012300/sp4.lnhueenableall3,在对应的ModuleGPB上开启以下trace(如Module10):lhshmod10teetrace3trace4trace6trace7UE_GENERALlhshmod10teebus_sendbus_receiveUE_ASN_RRClhshmod10teebus_sendbus_receiveUE_ASN_NBAPlhshmod10teebus_sendbus_receiveUE_ASN_RANAPlhshmod10teetrace3trace6trace7UE_RAB_ESTlhshmod10teetrace4trace6trace7UE_GENERALlhshmod10teebus_sendbus_receiveAns_aal2ap_proclhshmod10tefilterset18NBAP*lhshmod10teeallUEH_EXCEPTIONlhshmod10teeallIU_IF/mod10如果lhsh连接不上，则用bp mod10得到该module的板号，再lhsh该板号4,在对应的SPB上开以下trace(如module10对应的两块SPB):lhsh012200teeallSP_EXCEPTIONlhsh012300teeallSP_EXCEPTIONlhsh012200teebus_receiveSP_CONFIG_UElhsh012300teebus_receiveSP_CONFIG_UE2009-11-23 rrcConnectionReject1、针对rrcConnectionReject的问题，可以对单站追下列Trace，能看到rrcConnectionReject信息Failed to encode RRC message 抓取下列Trace： RRC_ASN bus_send, bus_receiveuehUeCtxtC* 1,3, 6,7, enter, returnlh mod42 te e bus_send bus_receive NBAP_ASNlh mod42 te e bus_send bus_receive RANAP_ASNlh mod42 te e bus_send bus_receive RRC_ASNlh mod42 te filter set (18) NBAP_ASNlh mod42 te e bus_send bus_receive RAB_ESTlh mod42 te e bus_send bus_receive Ans_aal2ap_proclh mod42 te e all UEH_EXCEPTIONlhsh 121400 te e trace1 trace3 trace6 trace7 uehUeCtxtC*mon-mon+ mod42/home/XUPF/moshell/monitor6054 5.31.240.1 33079 | tee ./WXTD2017_091123.raw | ./decoder.pl | tee ./WXTD2017_091123.dec | ./flow.pl -colour | tee ./WXTD2017_091123.flwlhsh 121400 te e bus_send bus_receive NBAP_ASN lhsh 121400 te e bus_send bus_receive RANAP_ASNlhsh 121400 te e bus_send bus_receive RRC_ASNlhsh 121400 te e all UEH_EXCEPTION lhsh 121400 te e bus_send bus_receive Ans_aal2ap_proc*lhsh 121400 te e trace1 trace3 trace6 trace7 uehUeCtxtC*2009-12-29 基站Trace小区建立的trace，先将小区闭掉，然后开启，追建立过程的trace:在基站的moshell上输入：tedefaultteebus_sendbus_receiveCDCI*teebus_sendbus_receiveCBCI*teebus_sendbus_receiveNBAP*mon-mon000100/opt/ericsson/amos/moshell/monitor6054 174.31.0.169 33079 | tee ./WXTD2008_091229.raw本地Trace解码：从网管上下载RAW文件WXTD2008_091229.raw到本地的decoder目录下，进入moshell下的decoder目录，输入：cat WXTD2008_091229.raw|./decoder.pl|tee WXTD2008_091229.dec|./flow.pl -colour | tee WXTD2008_091229.flw2010-01-04 遇到多RRU级联，第二个RRU通道起不来可以在基站上抓下列Trace：te default *te default -restart *te e bus_send bus_receive NBAP*te e all Ans_aal2ap_procte e bus_send bus_receive CDCI*te e bus_send bus_receive CBCI*te e bus_se