TEMS系统消息.doc

主叫MS系统消息可以分为两部分： 在BCCH信道上发送的系统消息，主要包括系统消息1、2、2BIS、2TER、3、4，用于手机空闲态； 在SACCH信道上发送的系统消息，主要包括系统消息5、5BIS、5TER、6。为支持GPRS，华为BSC还支持系统消息7和13，用于手机通话态。Synch Channel InformationTime: 17:59:51.53Frame number: 355581Channel number Channel number : (GSM 1800) 539FrameOffset : 975065Ts0Offset : 9228BSIC : 6-4T1 : 1003T2 : 14T3 : 0spare : 0Message dump: d1 f5 b8 00System Information Type 1随机接入控制信息(RACH)+小区频点分配表(即CA表)Time: 18:00:01.22Frame number: 623024Read from ARFCN Channel number : (GSM 900) 84-BCCHL2 pseudo length : 21Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 25Cell channel description Bitmap 0 Channels : 5 15 25 84 RACH control parameters Max retransmission : (2) Maximum 4 retransmissions Tx-integer : (14) 32 slots used Cell bar access : (0) Not barred Call reestablishment : (0) Allowed Access cSystem Information Type 2- Neighbor Cell Desc. (邻小区描述)- - NCC permitted(NCC允许)- - RACH Control Para.(RACH信道控制参数)同系统消息1Time: 17:59:52.73Frame number: 355835Read from ARFCN Channel number : (GSM 900) 94L2 pseudo length : 22Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 26Neighbour Cell Description EXT IND : (0) The information element carries the complete BA BA IND : 0 Bitmap 0 Channels : 74 76 77 78 79 80 81 82 84 85 88 89 90 92 94 -nBCCH(900)NCC permitted NCC permitted values : 5 6 RACH control parameters Max retransmission : (2) Maximum 4 retransmissions Tx-integer : (14) 32 slots used Cell bar access : (0) Not barred Call reestablishment : (0) Allowed Access control Emergency Call allowed : (0) All MSs Barred classes : Message dump: 59 06 1a 00 00 00 00 2b 9b fa 00 00 00 00 00 00 00 00 00 60 b8 00 00System Information Type 2terTime: 17:59:51.79Frame number: 355631Read from ARFCN Channel number : (GSM 900) 94L2 pseudo length : 18Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 3Neighbour Cell Description 2 Multiband reporting : (0) Normal reporting of the six strongest cells, with known and allowed NCC part of BSIC. BA IND : 0 Variable bitmap Channels : 512 514 519 524 527 528 539 545 550 568 623 -Nbcch(1800)Rest octetsMessage dump: 49 06 03 8f 00 21 09 80 10 42 00 00 80 00 00 00 00 00 01 2b 2b 2b 2bPaging Request Type 2Time: 17:59:53.24Frame number: 355931Message target : (0) Message not directed to this MSL2 pseudo length : 21Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 34Channels needed Second channel : (0) Any channel First channel : (0) Any channelPage mode : (0) Normal pagingMobile identity 1 TMSI/P-TMSI : Hex 0xC5C3982CMobile identity 2 TMSI/P-TMSI : Hex 0xC3161A9CMobile identity 3 Odd/even indication : (1) Odd number of digits Type of identity : (1) IMSI Identity digits (BCD) : 460000267076244 0 : 4 1 : 6 2 : 0 3 : 0 4 : 0 5 : 0 6 : 2 7 : 6 8 : 7 9 : 0 10 : 7 11 : 6 12 : 2 13 : 4 14 : 4Rest octets CN3 : (0) Any channel Packet page indication 3: Paging procedure for RR connection establishmentMessage dump: 55 06 22 00 c5 c3 98 2c c3 16 1a 9c 17 08 49 06 00 20 76 70 26 44 8bSystem Information Type 3 - - Cell Identity(小区标识)- - LAI(位置区标识)- - Control Channel Desc.(控制信道描述信息)- - Cell Option（BCCH）(小区选项) - - Cell Selection Para.(小区选择参数) - - RACH Control Para.(接入信道控制参数)Time: 17:59:59.90Frame number: 357395Read from ARFCN Channel number : (GSM 900) 79L2 pseudo length : 18Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 27Cell identity (CI) : 39362 (Hex 0x99C2)Location Area Identification(位置区识别) Mobile country code (MCC) : 460 Mobile network code (MNC) : 00 Location area code (LAC) : 37225 (Hex 0x9169)Control channel description（控制信道描述） MSCR : (0) MSC is Release 98 or older Attach/detach allowed (ATT) : (1) YES BS-AG-BLKS-RES : 2 CCCH-CONF : (0) 1 basic physical channel used for CCCH, not combined with SDCCHs BS-PA-MFRMS : 2 multiframes period T3212 timeout value : 8Cell options (BCCH)（小区描述） Power control indicator (PWRC) : (1) Set DTX indicator : (1) The MSs shall use uplink discontinuous transmission RADIO-LINK-TIMEOUT : 64Cell selection parameters（小区选择参数） CELL-RESELECT-HYSTERESIS : 14 dB Rxlev hysteresis for LA-reselection MS-TXPWR-MAX-CCH : 5 ADDITIONAL RESELECT PARAM IND (ACS) : (0) Spare HALF RATE SUPPORT (NECI) : (0) New establishment causes are not supported RXLEV-ACCESS-MIN : 10RACH control parameters（RACH控制参数） Max retransmission : (2) Maximum 4 retransmissions Tx-integer : (14) 32 slots used Cell bar access : (0) Not barred Call reestablishment : (0) Allowed Access control Emergency Call allowed : (0) All MSs Barred classes : Rest octets Selection Parameters cbq : 0 Cell reselection offset : (0) 0 dB Temporary offset : (0) 0 dB Penalty time : (0) 20 s Power Offset : 2 dB System Information 2ter indicator - Available Early classmark sending control - Explicity forbidden BCCH scheduling is not sent in SI9 GPRS indicator RA color : 1 SI13 position : (0) SI13 message is sent on BCCH Norm The sending of UTRAN and CDMA2000 Classmark Sending messages is controlled by the Early Classmark Sending Control parameterMessage dump: 49 06 1b 99 c2 64 f0 00 91 69 50 00 08 5f e5 0a b8 00 00 80 00 b8 5bSystem Information Type 4- - LAI（位置区标识） - - Cell Selection Para.(小区选择参数) - - RACH Control Para.(随机接入控制参数) - - CBCH Channel Desc.(option)(CBCH 信道描述)- - CBCH Mobile Allocation(option)(CBCH移动分配) - - SI4 Rest Oct.(小区重选相关参数)Time: 17:59:58.25Frame number: 357011Read from ARFCN Channel number : (GSM 1800) 539L2 pseudo length : 12Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 28Location Area Identification Mobile country code (MCC) : 460 Mobile network code (MNC) : 00 Location area code (LAC) : 37225 (Hex 0x9169)Cell selection parameters CELL-RESELECT-HYSTERESIS : 6 dB Rxlev hysteresis for LA-reselection MS-TXPWR-MAX-CCH : 5 ADDITIONAL RESELECT PARAM IND (ACS) : (0) The SI 4 rest octets, if present, shall beused to derive the value of PI and possiblyC2 parameters and/or other parameters HALF RATE SUPPORT (NECI) : (1) New establishment causes are supported RXLEV-ACCESS-MIN : 12RACH control parameters Max retransmission : (2) Maximum 4 retransmissions Tx-integer : (14) 32 slots used Cell bar access : (0) Not barred Call reestablishment : (0) Allowed Access control Emergency Call allowed : (0) All MSs Barred classes : Rest octets Selection Parameters cbq : 0 Cell reselection offset : (0) 0 dB Temporary offset : (0) 0 dB Penalty time : (0) 20 s Power Offset : 2 dB GPRS indicator RA color : 1 SI13 position : (0) SI13 message is sent on BCCH Norm Additional parameters are not sent in SYSTEM INFORMATION TYPE 7 and 8Message dump: 31 06 1c 64 f0 00 91 69 65 4c b8 00 00 80 00 b2 2b 2b 2b 2b 2b 2b 2bPaging Request Type 3Time: 17:59:59.36Frame number: 357257Message target : (0) Message not directed to this MSL2 pseudo length : 19Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 36Channels needed Second channel : (0) Any channel First channel : (0) Any channelPage mode : (0) Normal pagingMobile identity 1 TMSI/P-TMSI : Hex 0x00026F1CMobile identity 2 TMSI/P-TMSI : Hex 0xC57A8BF2Mobile identity 3 TMSI/P-TMSI : Hex 0x0C02D3D7Mobile identity 4 TMSI/P-TMSI : Hex 0x04032091Rest octets CN3 : (0) Any channel CN4 : (0) Any channelMessage dump: 4d 06 24 00 00 02 6f 1c c5 7a 8b f2 0c 02 d3 d7 04 03 20 91 83 2b 2bImmediate AssignmentTime: 18:00:00.77Frame number: 357562Message target : (255) UnknownL2 pseudo length : 11Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 63Two-message assignment (TMA) : (0) No meaningDownlink assignment to mobile in packet idle mode : (0) No meaningTBF or dedicated mode (T/D) : (0) Assigns a dedicated mode resourcePage mode : (0) Normal pagingChannel description Channel type : (8) SDCCH/8 + SACCH/C8 or CBCH (SDCCH/8) Subchannel : 7 Timeslot number (TN) : 1 Training sequence code (TSC) : 5 Hopping RF channel : (0) NO Absolute radio frequency channel number (ARFCN) : 94Request reference Establishment cause : (6) Originating call and TCH/F is needed, or originating call and the network does not set NECI bit to 1, or procedures that can be completed with a SDCCH and the network does not set NECI bit to 1 Random reference : 23 FN modulo 42432 : 18080 Representation : T1 = 13, T2 = 10, T3 = 26Timing advance Timing advance value : 0Mobile allocation Length : 0Rest octets EmptyMessage dump: 2d 06 3f 00 79 a0 5e f7 6b 4a 00 00 2b 2b 2b 2b 2b 2b 2b 2b 2b 2b 2bChannel RequestTime: 18:00:01.28Frame number: 357672Frame number : 357671Read from ARFCN Channel number : (GSM 900) 94Random Access Information Establishment cause : (6) Originating call and TCH/F is needed, or originating call and the network does not set NECI bit to 1, or procedures that can be completed with a SDCCH and the network does not set NECI bit to 1 Random reference : 10Message dump: EaPaging Request Type 2Time: 18:00:01.41Frame number: 357701Message target : (0) Message not directed to this MSL2 pseudo length : 21Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 34Channels needed Second channel : (0) Any channel First channel : (0) Any channelPage mode : (0) Normal pagingMobile identity 1 TMSI/P-TMSI : Hex 0xC40AB592Mobile identity 2 TMSI/P-TMSI : Hex 0x30045389Mobile identity 3 Odd/even indication : (1) Odd number of digits Type of identity : (1) IMSI Identity digits (BCD) : 460021296925416 0 : 4 1 : 6 2 : 0 3 : 0 4 : 2 5 : 1 6 : 2 7 : 9 8 : 6 9 : 9 10 : 2 11 : 5 12 : 4 13 : 1 14 : 6Rest octets CN3 : (0) Any channel Packet page indication 3: Paging procedure for RR connection establishmentMessage dump: 55 06 22 00 c4 0a b5 92 30 04 53 89 17 08 49 06 20 21 69 29 45 61 8bSystem Information Type 5Neighbor Cell Desc.(邻近小区描述)Time: 18:00:06.13Frame number: 624088Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 29Neighbour Cell Description-BA2 EXT IND : (0) The information element carries the complete BA BA IND : 0 Bitmap 0 Channels : 74 76 77 79 80 81 82 85 88 89 90 91 92 94 Message dump: 06 1d 00 00 00 00 2f 93 da 00 00 00 00 00 00 00 00 00System Information Type 5terTime: 18:00:05.19Frame number: 623884Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 6Neighbour Cell Description 2 Multiband reporting : (0) Normal reporting of the six strongest cells, with known and allowed NCC part of BSIC. BA IND : 0 Variable bitmap Channels : 539 545 550 568 623 Message dump: 06 06 8f 0d 82 10 00 04 00 00 00 00 00 00 08 00 00 00Measurement ReportTime: 18:00:03.37Frame number: 358126Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 21BA USED : 0DTX USED : (0) DTX is not usedRxLev Full Serving Cell : 403G BA USED : 0MEAS VALID : (0) The measurement results are validRxLev Sub Serving Cell : 40RxQual Full Serving Cell : 5RxQual Sub Serving Cell : 5Neighbour cell measurements RxLevBSICBCCH-INDEX : 0 : 47 5-5 14 1 : 42 6-6 08 2 : 36 6-4 21 3 : 32 5-6 09 4 : 31 5-1 12 5 : 29 5-6 13Message dump: 06 15 28 28 5b af 75 b5 23 69 2b a4 09 b9 f6 52 eb 6eMessage dump: 05 14 20 09 8d 52System Information Type 6 - - Cell Identity（小区标识） - - LAI（位置区标识）- - Cell Option（小区选项）- - NCC Permitted（NCC允许Time: 18:00:05.66Frame number: 623986Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 30Cell identity (CI) : 36466 (Hex 0x8E72)Location Area Identification Mobile country code (MCC) : 460 Mobile network code (MNC) : 00 Location area code (LAC) : 37225 (Hex 0x9169)Cell options (SACCH) Power control indicator (PWRC) : (1) Set DTX indicator : The MS shall use uplink discontinuous transmission on a TCH/F. The MS shall use uplink discontinuous transmission on a TCH/H. RADIO-LINK-TIMEOUT : 64NCC permitted NCC permitted values : 5 6 Rest octets No PCH/NCH info No VBS/VGCS options DTM not supported Band indication 1800Message dump: 06 1e 8e 72 64 f0 00 91 69 df 60 2b 2b 2b 2b 2b 2b 2bSystem Information Type 13Time: 18:00:02.16Frame number: 623229Read from ARFCN Channel number : (GSM 900) 84L2 pseudo length : 0Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 0Rest octets BCCH CHANGE MARK : 5 SI CHANGE FIELD : (0) Update of unspecified SI message or SI messages PBCCH not present in cell Routing area code (RAC) : 8 SPGC CCCH SUP : (0) SPLIT PG CYCLE is not supported on CCCH in this cell PRIORITY ACCESS THR : (6) Packet access is allowed for priority level 1 to 4 NETWORK CONTROL ORDER : (0) NC0: MS controlled cell re-selection, no measurement reporting GPRS cell options NMO : (1) Network mode of operation II T3168 : (1) 1000 milliseconds T3192 : (1) 1000 milliseconds DRX TIMER MAX : (3) 4 s ACCESS BURST TYPE : (0) 8 bit access burst shall be used CONTROL ACK TYPE : (0) Default format is 4 access bursts BS CV MAX : 10 PAN DEC : 2 PAN INC : 4 PAN MAX : Maximum value allowed for counter N3102 is 12 Extension information EGPRS support : (1) EGPRS supported in this cell EGPRS_PACKET_CHANNEL_REQUEST : (0) EGPRS Packet Channel Request shall be used on RACH/PRACH. BEP_PERIOD : 5 PFC_FEATURE_MODE : (0) The network does not support packet flow context procedures. DTM_SUPPORT : (0) The cell does not support DTM procedures. BSS_PAGING_COORDINATION : (1) The cell supports CS paging co-ordination. GPRS power control parameters Alpha : (6) 0.6 T AVG W : 10 T AVG T : 10 PC MEAS CHAN : (1) Downlink measurements for power control shall be made on PDCH N AVG I : 2 SGSNR : (1) SGSN R99 or onwardsMessage dump: 01 06 00 d0 02 18 49 65 54 52 a5 2b 29 52 cb 2b 2b 2b 2b 2b 2b 2b 2bCM Service RequestTime: 18:00:02.47Frame number: 357931Skip indicator : 0Protocol discriminator : (5) Mobility management messagesMessage type : 36Ciphering key sequence number Key sequence : (6) 6CM service type Service type : (1) Mobile originating call establishment or packet mode connection establishmentMobile station classmark Revision level : (1) Phase 2 mobile station ES IND : (1) Controlled Early Classmark Sending option is implemented in the MS A5/1 : (0) Encryption algorithm A5/1 available RF Power Capability : (3) class 4 PS capability (pseudo-synchronization capability) : (0) PS capability not present SS Screening Indicator (defined in TS 24.080) : 1 SM capability (MT SMS pt to pt capability) : (1) Mobile station supports mobile terminated point to point SMS VBS notification reception : (0) No VBS capability or no notifications wanted VGCS notification reception : (0) No VGCS capability or no notifications wanted FC Frequency Capability : (1) (GSM900 only:) The MS supports E-GSM or R-GSM CM3 : (1) The MS supports options that are indicated in classmark 3 IE LCS VA capability : (0) LCS value added location request notification capability not supported UCS2 : (0) The ME has a preference for the default alphabet (defined in GSM 03.38) over UCS2. SoLSA : (0) The ME does not support SoLSA. CMSP: CM Service Prompt : (0) Network initiated MO CM connection request not supported. A5/3 : (0) Encryption algorithm A5/3 not available A5/2 : (1) Encryption algorithm A5/2 availableMobile identity Odd/even indication : (0) Even number of digits Type of identity : (4) TMSI/P-TMSI TMSI/P-TMSI : Hex 0x04035095Message dump: 05 24 61 03 33 19 81 05 f4 04 03 50 95GPRS Suspension Request(uplink)Time: 18:00:02.74Frame number: 357990Skip indicator : 0Protocol discriminator : (6) Radio resources management messagesMessage type : 52TLLI : 3251514378 (Hex 0xC1CE2C0A) (Local TLLI)Routing area identification Mobile country code (MCC) : 460 Mobile network code (MNC) : 00 Location area code (LAC) : 37225 (Hex 0x9169) Routing area code (RAC) : 8 (Hex 0x08)Suspension cause Value : (0) Emergency call, mobile originating call or call re-establishmentMessage dump: 06 34 c1 ce 2c 0a 64 f0