SECO Injector中英文对照.docx

SECO Injector Instructions v2SECO激活器使用说明= SppExtComObj (SECO) Injector Hook with an integrated KMS Server - no external/separate KMS Server or service is needed 集成KMS服务器-无需外部/分离式KMS服务器或任务 =Version : 2.4.2 - activates 32bit & 64bit Windows 7 with & without SP1, Windows 8 & 8.1. Does not activate Windows Vista.2.4.2版可以激活32位及64为windows 7及windows 8 及8.1.SECO Injection loading allows a one-time activation for either 180 or 45 day grace period, depending on your Windows version可以因系统不同一次性激活180天或45天。 =To load the 64bit injection (for 32bit injection - replace ._x64 commands with ._x86 without ):64位激活器使用方法（装在32位时- 把._x64命令换成._x86即可） 1. Extract all downloaded archive files to C:SECO Injector or a directory of your choice解压缩所有下载的文件至目录C:SECO Injector或者自建目录 2. Run the Settings.reg file within the directory and press Yes if youre asked to continue双击运行Settings.reg，在出现的确认窗口点击“确认”继续下一步 3. Use a right-click to open Command Prompt and select Run as Administrator 在屏幕右下角开始图标上点击鼠标右键，选择其中的“命令提示符（管理员）” 4. Enter or copy & paste the following commands without and press Enter on after each command line: 依次输入或者拷贝下列命令（不带引号），并依次回车确认 slmgr /ckms slmgr /skms 8.7.8.7 或者 slmgr /skms 不带 引号 cd C:SECO Injector 或者 cd 不带 引号 SECOInjector_x64.exe /s 8.7.8.7 /f /l 或者 SECOInjector_x64.exe /s /f /l 不带 引号. (如出现0x1 故障即表示成功 ) slmgr /ato You should be receiving a successful activation message 应该马上就会出现激活成功信息 To unload the 64bit injection (for 32bit injection - replace ._x64 commands with ._x86 without ): 卸载64位激活器（卸载32位的话，把._x64命令换成._x86即可） 1. Use a right-click to open Command Prompt and select Run as Administrator 在屏幕右下角开始图标上点击鼠标右键，选择其中的“命令提示符（管理员）” 2. Enter or copy & paste the following commands without and press Enter after each command line: 依次输入或者拷贝下列命令（不带引号），并依次回车确认 cd C:SECO Injector 或者 cd 不带 引号 SECOInjector_x64.exe /f /u SECO Injection service creates a service that silently runs in the background and frequently re-activates your Windows 安装SECO激活器任务是为了在后台静默运行持续（上述45天后180天到期后后）激活的服务 =To create the 64bit injection service (for 32bit injection - replace ._x64 commands with ._x86 without ): 如何创建64位服务（32位的话，把._x64命令换成._x86即可） 1. Extract all downloaded archive files to C:SECO Injector or a directory of your choice 解压缩所有下载的文件至目录C:SECO Injector或者自建目录 2. Run the Settings.reg file within the directory and press Yes if youre asked to continue 双击运行Settings.reg，在出现的确认窗口点击“确认”继续下一步 3. Use a right-click to open Command Prompt and select Run as Administrator 在屏幕右下角开始图标上点击鼠标右键，选择其中的“命令提示符（管理员）” 4. Enter or copy & paste the following commands without and press Enter after each command line: 依次输入或者拷贝下列命令（不带引号），并依次回车确认 slmgr /ckms slmgr /skms 8.7.8.7 或者 slmgr /skms 不带此引号 cd C:SECO Injector 或者 cd 不带此引号 SECOInjector_x64.exe /c (如出现0x1故障代码即表示大功告成) slmgr /ato You should be receiving a successful activation message 应该马上出现激活成功的信息窗口 Note: Do not remove this directory from your computer if you want to continue using SECO Injection service 注意：如果想一直使用SECO服务的话，就不要移除此目录 To remove the 64bit injection service (for 32bit injection - replace ._x64 commands with ._x86 without ): 如何移除64位服务（32位的话，把._x64命令换成._x86即可） 1. Use a right-click to open Command Prompt and select Run as Administrator 在屏幕右下角开始图标上点击鼠标右键，选择其中的“命令提示符（管理员）” 2. Enter or copy & paste the following commands without and press Enter after each command line: 依次输入或者拷贝下列命令（不带引号），并依次回车确认 cd C:SECO Injector 或者 cd 不带此引号 SECOInjector_x64.exe /r = Registry Settings : 注册表文件Settings.reg说明 HKEY_LOCAL_MACHINESOFTWARESECOInjector Enabled (REG_DWORD): 1 = On, 0 = Off KMS_Emulation (REG_DWORD): 1 = On, 0 = Off (If emulation is not used it will redirec