LT50001DIT-01.doc

深圳亮晶晶电子有限公司SHENZHEN SPARKLING ELECTRONICS CO., LTD样品承认书Customer： Date：2011-04-225.0” 480*RGB*272 DOTSMODULE NO.: LT50001DIT-01 Customer ApprovedElectronic Mechanism Touch Panel Performance Performance PerformanceApproved QC Confirmed Designer备注：规格书一式三份，客户惠存两份，另一份请寄回亮晶晶公司业务接口人： 电话：公司地址：深圳市光明新区凤新路勒堡工业园1栋公司电话61537032 传真址：LTT Product Specification(Formal)5.0 Color TFT-LCD Model(480*272 16:9)Model：LT50001DIT-01Note:1. Please contact LTT before designing your product based on this module specification.2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by LTT for any intellectual property claims or other problems that may result from application based on the module described herein.3. The mark “*” of Model means sub-model codeRecord of RevisionsDateSub-ModelDescription of change1.0May, 05, 2011A00/ A30Formal Product Specification was first released. Modify of label attachment on P0.Contents1.0General description.p.52.0Absolute maximum ratings.p.63.0Optical characteristics.p.74.0Block diagram. .p.105.0Interface pin connection.p.116.0Electrical characteristics.p.127.0Reliability test itemsp.168.0Outline dimension.p.179.0Package specification.p.1810.0General precaution .p.19GENERAL DESCRIPTION1.1 IntroductionLTT Display model LT50001DIT-01 is a color active matrix thin film transistor (TFT) liquid crystal display (LCD) that uses amorphous silicon TFT as a switching device. This model is composed of a TFT LCD panel, a driving circuit , a touch panel, and a backlight system. This TFT LCD has a 5.0 (16:9) inch diagonally measured active display area with WQGA (480 horizontal by 272 vertical pixel) resolution.1.2 Features 5.0 (16:9 diagonal) inch configuration 8 bits color depth with 128 gray-scale Parallel 8-bit RGB data input RoHS and Halogen-Free Compliance1.3 Applications Personal Navigation Device Multimedia applications and Others AV system1.4 General informationItemSpecificationUnitNoteOutline Dimension120.7X75.8X3.15 (Typ.)mmDisplay area110.88(H) x62.83(V)mmNumber of Pixel480 RGB (H) x 272(V)pixels16:9WQVGA WVGAPixel pitch0.231(H) x 0.231(V)mmPixel arrangementRGB Vertical stripe-Display modeNormally white-TN ModelSurface TreatmentAntiglare-Dirver Elementa-Si TFT-Display Colors16.7M-8bitLED12PCSEstablish2.0 ABSOLUTE MAXIMUM RATINGS2.1 Electrical Absolute Rating2.1.1TFT LCD ModuleItemSymbolMin.Max.UnitNotePower supply voltageVDD-0.55.0VGND=0Logic Signal Input LevelVi-0.3VDD +0.3V2.1.2Back-Light UnitItemSymbolTYP.Max.UnitNoteLED currentIL40-mA(1)(2)(3)LED voltageV18.7-V(1)(2)(3)Note(1) Permanent damage may occur to the LCD module if beyond this specification. Functional operation should be restricted to the conditions described under normal operating conditions.(2) Ta =252(3) Test Condition: LED current 40 mA. The LED lifetime could be decreased if operating IL is larger than 40 mA.2.2 Environment Absolute RatingItemSymbolMin.Max.UnitNoteOperating TemperatureTopa-2070Storage TemperatureTstg-30803.0 OPTICAL CHARACTERISTICS3.1Optical specificationItemSymbolConditionMin.Typ.Max.UnitNoteThreshold voltageVsat2.4(6)Vth1.4(6)Transmittance(With PZ)T7.33ContrastCR=0Normal viewing angle400800(1)(2)Response timeRisingTR1722msec(1)(3)FallingTF1520White luminance(center)YL320350cd/m2I=40mAColor gamutS45-%C lightColor chromaticity(CIE1931)WhiteWx0.2800.3200.360(1)(4) CF Glass C lightWy0.3000.3400.380RedRx0.6160.6310.646Ry0.3270.3420.357GreenGx0.3060.3210.336Gy0.5380.5530.568BlueBx0.1340.1490.164By0.1680.1830.198Viewing angleHor.LCR107080R7080Ver.U7080D7080Optima View DirectionOptima View Direction6 Oclock(5)3.2Measuring Condition Measuring surrounding: dark room LED current IL: 40mA Ambient temperature: 252oC 15min. warm-up time.3.3Measuring Equipment FPM520 of Westar Display technologies, INC., which utilized SR-3 for Chromaticity and BM-5A for other optical characteristics. Measuring spot size: 20 21mDURL=0=18012 Oclock=906 Oclock=270Note (1) Definition of Viewing Angle:Note (2) Definition of Contrast Ratio (CR): measured at the center point of paneLuminance with all pixels whiteCR = Luminance with all pixels blackNote (3) Definition of Response Time: Sum of TR and TF100%90%10%0%OpticalresponseTrTfWhite（TFT OFF）Black（TFT ON）White（TFT OFF）TimeNote (4) Definition of optical measurement setupNote (5) Rubbing Direction (The different Rubbing Direction will cause the differentoptimal view direction.Note (6) Definition of Vsat and Vth (at 200C4.0 BLOCK DIAGRAM4.1 TFT LCD Module4.2 Pixel Format5.0 INPUT INTERFACE PIN ASSIGNMENTFPC connector is used for electronics interface.The recommended model is FH19SC-40S-0.5SH (51) manufactured by HIROSE.Pin No.SymbolI/OFunction1VLED-PPower for LED backlight cathode2VLED+PPower for LED backlight anode3GNDPPower ground4VDDPPower voltage5R0IRed data (LSB)6R1IRed data7R2IRed data8R3IRed data9R4IRed data10R5IRed data11R6IRed data12R7IRed data (MSB)13G0IGreen data (LSB)14G1IGreen data15G2IGreen data16G3IGreen data17G4IGreen data18G5IGreen data19G6IGreen data20G7IGreen data (MSB)21B0IBlue data (LSB)22B1IBlue data23B2IBlue data24B3IBlue data25B4IBlue data26B5IBlue data27B6IBlue data28B7IBlue data (MSB)29DGNDIDigital ground30DCLKIPixel clock31DISPIDisplay on/ off32HSYNCIHorizontal sync signal33VSYNCIVertical sync signal34DEIData enable35NC-No Connect36GNDPPower ground37X_RI/ORight electrode - differential analog38Y_BI/OBottom electrode - differential analog39X_LI/OLeft electrode - differential analog40Y_TI/OTop electrode - differential analogI/O: I: input, O: output, P: power6.0 ELECTRICAL CHARACTERISTICS6.1 DC Electrical CharacteristicsItemSymbolMin.Typ.Max.UnitNoteSupply voltageVDD3.03.33.6VInput signal voltageViH0.7 VDD-VDDVNote (1)ViLGND-0.3 VDDVNote (1)Current of power supplyIDD-24.12mAVDD = 3.3VNote (1): HSYNC, VSYNC, DE, R/G/B DataNote (2): GND=0V6.2 Data Input Format 6.3 AC Electrical Characteristics6.3 Power On/Off SequencePower On SequencePower Off Sequence7.0 RELIABILITY TEST ITEMSNo.ItemConditionsRemark1High Temperature StorageTa=+80oC, 240hrs2Low Temperature StorageTa=-30oC, 240hrs3High Temperature OperationTa=+70oC, 240hrs4Low Temperature OperationTa=-20oC, 240hrs5High Temperature and High Humidity(operation)Ta=+60oC, 90%RH, 240hrs6Thermal Cycling Test (non operation)-30oC(30min) +80oC(30min), 200cycles7Electrostatic Discharge200V,200pF(0) 1 time/each terminal8Vibration1.Random:1.04Grms, 5500Hz, X/Y/Z,30min/each direction2. Sine:Freq. Range: 833.3HzStoke: 1.3mmSweep: 2.9G, 33.3400HzX/Z: 2hr, Y: 4hr, cyc: 15min9Shock100G, 6ms, X, Y, Z3 time for each directionJIS C7021, A-10(Condition A)10Vibration (with carton)Random: 0.015G2/Hz, 5200Hz-6dB/Octave, 200400HzXYZ each direction: 2hr11Drop (with carton)Height: 60cm1 corner, 3 edges, 6 surfacesJIS Z0202Note: There is no display function NG issue occurred, all the cosmetic specification is judged before the reliability stress.8.0 OUTLINE DIMENSIONLT50001DIT-01 Unit: mmNote: General Tolerance: +/- 0.3mm9.0 PACKAGE SPECIFICATION 9.1 Packing form LCM ModelLCM Qty.in the boxInner Box Size (mm)NoticeLT50001DIT-0190 PCSTBD9.2 Packing assembly drawinLT50001DIT-01 6PCS/PA90PCS/BOX6PCS*15/PA10.0 GENERAL PRECAUTION 10.1 Use Restriction This product is not authorized for use in life supporting systems, aircraft navigation control systems, military systems and any other application where performance failure could be life-threatening or otherwise catastrophic. 10.2 Disassembling or Modification Do not disassemble or modify the module. It may damage sensitive parts inside LCD module, and may cause scratches or dust on the display. HannStar does not warrant the module, if customers disassemble or modify the module. 10.3 Breakage of LCD Panel 10.3.1 .If LCD panel is broken and liquid crystal spills out, do not ingest or inhale liquid crystal, and do not contact liquid crystal with skin. 10.3.2. If liquid crystal contacts mouth or eyes, rinse out with water immediately. 10.3.3. If liquid crystal contacts skin or cloths, wash it off immediately with alcohol and rinse thoroughly with water. 10.3.4. Handle carefully with chips of glass that may cause injury, when the glass is broken. 10.4 Electric Shock 10.4.1. Disconnect power supply before handling LCD module. 10.4.2. Do not pull or fold the LED cable. 10.4.3. Do not touch the parts inside LCD modules and the fluorescent LEDs connector or cable