Soundbook便携蓝牙音箱 使用手册.doc

Bayan Audio执着于音 精致于型Soundbook 使用手册Q:Soundbook可以支持什么类型的音源?A:Soundbook 是专为与当今最流行的蓝牙设备包括智能手机，平板电脑和笔记本电脑的使用而设计的。此外，Soundbook 还包括一个辅助性的输入功能，用于连接MP3或其他的便携式播放设备。Q:What kind of audio sources can I use with Soundbook?A:Soundbook is designed specifically for use with todays most popular Bluetooth devices, including Smartphones, tablets and laptops. In addition, Soundbook includes an auxiliary input for connection to an MP3 or similar portable player.Q:我要怎么开始连接配对？A:想简单、安全地配对连接您的音频设备，您需要在离Soundbook一米之内的范围，将音源设备靠近Soundbook。1.打开您的Soundbook2. 按下电源键直到蓝色指示灯亮起3. 进入您设备的“蓝牙设备”功能选项，选择并打开蓝牙。查找新的蓝牙设备（名为“Bayan Soundbook”）并进行连接，连接过程不需要配对密码。 （注：蓝牙音频设备之间的连接可能有所不同，如果不确定怎样连接最为妥善，请查询用户手册） Q:How do I start pairing?A:For simple and secure pairing your audio device must be in close proximity to Soundbook - within a range of 1 metre. 1.Turn on Soundbook 2.Press the power/input button until BLU is displayed 3.Go into your Settings, select and turn on Bluetooth. Scan for new Bluetooth devices and nominate Bayan Soundbook. You will not be prompted for a pass code for pairing. (Note: Bluetooth audio connectivity can vary between devices so it can be useful to firstly check your audio source user manual for pairing instructions if youre not sure) Q:How do I connect by NFC - Automatic Paring?A:1.Turn on your audio source and unlock the screen 2.Make sure that NFC is enabled in the Settings on your audio source 3.Touch the back of your audio source to the back of the front cover of Soundbook where the NFC logo is located - you will be asked to confirm that you wish to connect and pair with the Bayan Soundbook - select Yes/OK. Bayan Soundbook - select Yes/OK.4.You can disconnect by simply touching your audio source again to the back cover of Soundbook. Q:怎样通过NFC自动配对?A: 1.打开您的音源设备并解锁屏幕2. 确保您音源设备的NFC功能可用3.用您的NFC设备触碰Soundbook 的前盖背面，当被询问是否需要连接时，选择“确定”4. 您可以通过简单的再次触碰Soundbook 前盖背面，断开当前连接Q:Why is my mobile phone not connecting?1.Already Connected. Soundbook will automatically connect to the last device used (if it is in range). If you want to connect to an alternate audio source, switch Bluetooth off on the connected device, then pair/connect with the alternate audio source. 2.Make sure Bluetooth is enabled on your phone. 3.Try it again (Turn Soundbook off and on again) 4.Remove Bayan Soundbook from your audio device (in the Bluetooth settings) and pair your phone again Q:为什么我的手机没有连接上?A:1. Soundbook会自动连接到最后一次使用的设备（如果该设备在可连接范围内），如果您要连接到其他音源设备，须先将当前所连接设备上的蓝牙关闭，然后配对/连接新的音频源设备。2. 确保您的手机蓝牙功能可用3. 关闭Soundbook重新再打开4. 将“Bayan Soundbook”从您的蓝牙配对设备列表中删除，再重新配对Q:How can I tell if my Soundbook is already connected to an audio device?A:The BLUE display has a small dot showing at the bottom of the letter U. If this dot is flashing then NO current device is connected. However, if the dot is continuously shown with no intermittent flashing then a device is already connected.Q:怎样判断我的Soundbook是否已经正确连接到音频设备?A:Soundbook的蓝色指示灯字母U下面有一个小圆点，如果这个圆点在闪烁则表明没有连接成功，如果这个圆点没有不间断地闪烁，则表明已成功连接。Q:How many audio devices can my Soundbook remember? A:A maximum of 4 Q:Soundbook能智能记忆多少个音源设备?A:最多4个Q:What is the wireless range of the Soundbook? A:Generally the Soundbook will work within 10 meters of your paired Bluetooth device. Q:Soundbook的无线连接有效距离是多少?A: 10米之内都能正常配对蓝牙设备Q:There is no audio coming from SoundbookA:1. Already Connected. Soundbook will automatically connect to the last device used (if it is in range). If you want to connect to an alternate audio source, switch Bluetooth off on the connected gadget, then pair/connect with the alternate audio source. 2.Make sure Bluetooth is enabled on your phone. 3. Adjust the volume on both your speaker and Bluetooth device. NOTE: On a Bluetooth connection, the volume on the speaker is independent of the device. To obtain maximum volume both the audio source and Soundbook volumes need to be turned up to maximum. Q:Soundbook不发声A: Soundbook会自动连接到最后使用的设备（如果该设备在可连接范围内），如果您要连接到其他音源设备，须先将当前所连接设备上的蓝牙功能关闭，然后配对/连接新的音频源设备。确保您的手机蓝牙功能可用调整Soundbook和蓝牙设备的音量。注：在蓝牙连接状态时，扬声器部分的音量是独立的，为了获得最大的音量效果，音源设备音量和Soundbook的音量都需要开到最大。Q:What is the playing/charging time of the battery?A: A fully charged battery provides up to 10 hours of continuous playing time. (Note: this can vary depending on volume levels and music genre) The first time you use your Soundbook, let it charge for 12 hours to ensure the battery is properly conditioned. Thereafter an empty battery will usually take 3-4 hours to charge. When the battery is low the Soundbook will detect this and the word LO will show on the front display.Q:Soundbook的电池播放/充电时间是多少?A: Soundbook一次充满电可提供长达10小时的连续播放时间（注：根据音量高低水平和音乐风格相应变化），当您第一次使用Soundbook时，需要给它充电满12小时，以保证电池已经正常可用，此后每次充电大约需要34小时，使用过程中电池电量低时，网罩面板上会出现“LO”字样。Q:How do I charge my Soundbook? A: Connect the power cable to the Soundbook Plug the power connector into a mains outlet. A red light will emit from the power connection on the back of the X3, changing to green when the Soundbook is chargedQ:怎样给我的Soundbook充电A: 将电源线与Soundbook连接将电源插头插入电源插座充电状态时，Soundbook背面会有红色指示灯亮起，当指示灯变为绿色时，表示充电已完成Q:Why my Bluetooth device keeps disconnecting from my windows Vista / 7 / 8 computer?A: 1.Go to Control Panel 2.Go to More Settings 3.Search for BLUETOOTH and Bluetooth options will appear under DEVICES AND PRINTERS 4.select CHANGE BLUETOOTH SETTINGS 5.Select the HARDWARE TAB 6.Select the GENERIC BLUETOOTH ADAPTER 7.Click the PROPERTIES Button 8.Click the CHANGE SETTINGS button 9.Select the POWER MANAGEMENT Tab 10.Uncheck the box that says Allow the computer to turn off the device to save power and OK your way back out.Q:为什么蓝牙设备不断从我Windows Vista/7/8系