水位控制器的设计.doc

水位控制器的VHDL设计(一)销售价格:￥118.00需要本篇全文可用支付宝与网上银行在线购买 财付通与网上银行在线购买付款成功3分钟内发到填写的邮箱里(信用说明)付款金额见标题右下角销售价格。也可用银行汇款转账支付（银行账号）。支持论文交换。水位控制器的VHDL设计摘要目前，锅炉、水塔、水箱几乎是工业生产中不可缺少的设备，保持水箱中的水位高度在规定的范围内是非常重要的。如果水位过低，锅炉可能被烧干；如果水位过高，水箱的水会溢出，产生危险。因此，水位控制是保证生产用水不可缺少的。现在市场上已有了一些水位控制器，但就其功能上还存在一些不足。例如，有些水位控制器没有报警功能，有些没有显示水位的功能等，因此，本设计详细的对水位控制器进行了分析并重新进行了设计。本设计设计的水位控制器是根据水位的高低不同情况自动控制给水水泵电机的启动与停止，同时显示水位，使水位一直保持在规定的范围内。同时还具有最高水位报警、最低水位报警，干涸水位报警等功能。关键词：水位控制；报警；显示。The VHDL Design of Water Level ControllerABSTRACT Currently, the boiler, water tower, water tank is almost the equipments that the industry produces the medium indispensability, keeping the water level in the water tank height is count for much within the scope of prescriptive.If the water level lead low, boiler the possibility is burn stem;If the water level lead high, the water of the water tank will overflow, creation danger.Therefore, the water level control is an assurance to produce is indispensable with the water.There has been some water level controllers on the market now, but its function still exists some shortage up.For example, some water level controllers did not report to the police the function, some functions that has no manifestation water level etc., therefore, the origin design detailed carried on the analysis to lay equal stress on the new line to the water levels controller design.The water level controller of this design design is a start that pumps the electrical engineering according to high and low and different circumstance the automatic control water supply water of the water level with stop, show the water level at the same time, make water level has been keep within the scope of prescriptive.Still have the tallest water level to report to the police at the same time, the lowest water level repor