彩屏显示熔融指数仪.doc

Melt Index Tester (Color crystal display)I Product Model：FYZ400II Main application and function：According to GB/T3682-2000 thermoplastic melt flow rate and melt volume flow rate determination, the requirements of design and manufacturing, the main parameters to meet the ISO1133-97, ASTM1238, JJG 878-1994 standards，which Can be used for ABS, polystyrene, polyethylene, polypropylene, polyamide, fiber resin, acrylate, POM, polycarbonate. Fluorine plastics and other plastic materials, the melt flow rate (MFR) or melt volume flow rate (MVR) to be determined. Note: According to user requirements can provide Chinese or English interface. III Main features:1、the heater elements have similar products out of the ordinary electric heating wire by the way, and the use of rare materials, nickel-chromium alloy metal casting is made with a high temperature burn is not bad for a long time to use features. 2、that is, the quality of law can do and can do the volume test method test. According to user requirements, comes with volume method (B method) of a displacement detection device. 3、equipped with a wireless remote control switching power supply device can be remotely start and stop the host experiment. 4、the instrument is the first color LCD display in Chinese. 5、automatic timing, automatic cutting, automatic calculation of melt index, automatically print test data and other features. IV Main technical parameters and accuracy: Temperature control parameters:Temperature range: 50 - 400 Temperature precision: 0.2 Display Resolution: 0.1 Maximum power consumption: 500 W Temperature Recovery Time: 4 min Load accuracy : 5 Piston position detection: The upper and lower ring distance: 30 mmDisplacement control accuracy: 0.1 mm Standard components: Barrel internal diameter: 9.550 0.025 mmPiston head size: 9.475 0.01 mm Piston head length: 6.35 0.1 mmMembrane diameter port size: 2.095 0.005 mm Power: 220V, 50HZ Dimensions: 420 300 620mm (L W H) Weight: approximately 60 kg V. Main configurations and accessories:Host a set of test one micro-printer one scraper one feeding push rod one guide sleeve one splice tray one piston one port film one funnel one cleaning tool die one barrel cleaning tool Weight: 0.325 kg (including material shot), 0.875 kg, 0.96 kg, 1.2 kg, 1.64 kg (based on user requirements can be allocated to increase 21.6kg) Standard test load (5 Grade): 1:0.325kg = (rod + weight + thermal units +No. 1 tray body weight) = 3.185N2 : 1.2kg = (0.325 +No.2 0.875kg weight) = 11.76N 3: 2.16kg = (0.325 +No. 3 1.835kg weight) = 21.168N 4: 3.8kg = (0.325 + No.4 3.475kg weight) = 37.24N 5: 5.0kg = (0.325 +No. 5 4.675kg weight) = 49N Note: According to user requirements can be increased with the following test loads:1: 10.0kg = (0.325 +No.5 4.675kg weight +No. 6 5.0kg weight) = 98N 2: 12.5kg = (0.325 +No.5 4.675kg weight+ No.6