DMZ6005 技术资料 中文规格书 PDF下载.pdf

2009 09 1 5 DMZ6005 耗尽型功率耗尽型功率 MOS 场效应管场效应管 产品特点产品特点 耗尽型 常开器件 专有的先进平面技术 坚固的多晶硅栅极的细胞结构 低RDS ON 的传导损耗 开关速度快 符合RoHS标准 无铅封装 产品应用产品应用 常开器件 固态继电器 线性放大器 逆变器 恒流源 电源电路 电信 订购代码订购代码 器件型号器件型号 封装形式封装形式 标识标识 DMZ6005 SOT 23 605 极限值极限值 除非另有说明 均指TA 25 符号符号 参数描述参数描述 DMZ6005 单位单位 VDSX 漏极 源极电压 1 600 V VDGX 漏极 栅极电压 1 600 V ID 漏极电流连续值 0 020 IDM 漏极电流脉冲值 2 0 081 mA PD 功耗 0 50 W VGS 栅极 源极电压 20 V TL 焊接温度 距离管壳1 6mm处 10秒 300 TJ 和 TSTG 结温和储存温度 55 to 150 注意 施加的电的或热的应力大于 极限值 表中所列参数值 可能导致器件永久的损坏 热特性热特性 符号符号 参数描述参数描述 DMZ6005 单位单位 R JA 结 环境热阻 250 K W BVDSS RDS ON Max IDSS min 600V 700 12mA 2009 09 DMZ6005 电特性电特性 关断特性关断特性 除非另有说明 均指TA 25 符号符号 参数描述参数描述 最小值典型值最大值单位最小值典型值最大值单位 测试条件测试条件 BVDSX 漏极 源极击穿电压 600 V VGS 5V ID 250 A 0 1 A VDS 600V VGS 5V ID OFF 漏极 源极泄漏电流 10 mA VDS 600V VGS 5V TJ 125 100 VGS 20V VDS 0V IGSS 栅极 源极泄漏电流 100 nA VGS 20V VDS 0V 导通特性导通特性 除非另有说明 均指TA 25 符号符号 参数描述参数描述 最小值典型值最大值单位最小值典型值最大值单位 测试条件测试条件 IDSS 饱和漏极 源极电流 12 mA VGS 0V VDS 25V RDS ON 漏极 源极导通电阻 500 700 VGS 0V ID 3mA 4 RDS ON 导通电阻温度系数 VGS 0V ID 10mA VGS OFF 栅极阈值电压 2 7 1 5 V VDS 3V ID 8 A VGS OFF 阈值电压温度系数 mV VDS 25V ID 10 A gfs 正向跨导 15 4 mS VDS 10V ID 5mA 动态特性动态特性 基本上与工作温度无关 符号符号 参数描述参数描述 最小值典型值最大值单位最小值典型值最大值单位 测试条件测试条件 CISS 输入电容 12 3 COSS 输出电容 2 6 CRSS 反向传输电容 1 8 pF VGS 5V VDS 25V f 1 0MHZ QG 栅极总电荷 1 55 QGS 栅极 源极电荷 0 12 QGD 栅极 漏极 密勒 电荷 0 56 nC VGS 5V 5V VDS 300V ID 5mA 开关特性开关特性 基本上与工作温度无关 符号符号 参数描述参数描述 最小值典型值最大值单位最小值典型值最大值单位 测试条件测试条件 td ON 开启延迟时间 4 trise 上升时间 9 td OFF 关断延迟时间 14 tfall 下降时间 84 ns VGS 5V 5V VDD 300V ID 5mA RG 20 2009 09 3 5 DMZ6005 体二极管特性体二极管特性 除非另有说明 均指TA 25 符号符号 参数描述参数描述 最小值典型值最大值单位最小值典型值最大值单位 测试条件测试条件 VSD 体二极管正向压降 1 2 V ISD 3 0mA VGS 10V trr 反向恢复时间 ns Qrr 反向恢复电荷 nC VR 300V IF 10mA di dt 100A s 注意 1 ID极限值受最高结温限制 2 TJ 25 to 150 3 重复性极限值 脉冲宽度受最高结温限制 4 脉冲宽度 380 s 占空比 2 2009 09 4 5 DMZ6005 典型性能曲线典型性能曲线 2009 09 5 5 DMZ6005 声明声明 ARK Microelectronics Co Ltd reserves the right to make change without notice in order to improve reliability function or design and to discontinue any product or service without notice Customers should obtain the latest relevant information before orders and should verify that such information is current and complete All products are sold subject to ARK Microelectronics Co Ltd s terms and conditions supplied at the time of order acknowledgement ARK Microelectronics Co Ltd warrants performance of its hardware products to the specifications at the time of sale Testing reliability and quality control are used to the extent ARK Microelectronics Co Ltd deems necessary to support this warrantee Except where agreed upon by contractual agreement testing of all parameters of each product is not necessary performed ARK Microelectronics Co Ltd does not assume any liability arising from the use of any product or circuit designs described herein Customers are responsible for their products and applications using ARK Microelectronics Co Ltd s components To minimize risk customers must provide adequate design and operating safeguards ARK Microelectronics Co Ltd does not warrant or convey any license either expressed or implied under its patent rights nor the rights of others Reproduction of information in ARK Microelectronics Co Ltd s data sheets or data books is permissible only if reproduction is without modification or alteration Reproduction of this information with any alteration is an unfair and deceptive business practice ARK Microelectronics Co Ltd is not responsible or liable for such altered documentation Resale of ARK Microelectronics Co Ltd s products with statements different from or beyond the parameters stated by ARK Microelectronics Co Ltd for the product or service voids all express or implied warrantees for the associated ARK Microelectronics Co Ltd s product or service and is unfair and deceptive business practice ARK Microelectronics Co Ltd is not responsible or liable for any such statements Life Support Policy ARK Microelectronics Co Ltd s products are not authorized for use as critical components in life devices or systems without the expressed written approval of ARK Microelectronics Co Ltd As used herein 1 Life support devices or systems are devices or systems which a are intended for surgical implant into the human body b support or sustain life c whose failure to perform when properly used in accordance with instructions for used provided in the labeling can be reasonably expected to result in significant injury to the user 2 A critica