英国包装材料标准列表.docx

编号中文名称英文名称BS 1133 Secs.1 to 3-1989 包装规程.第1-3节:包装概括介绍 Packaging code - Introduction to packaging BS 1133-10.1-1990 包装规程.第10节:金属容器.第1小节:马口铁制听桶和罐 Packaging code - Metal containers - Tins and cans BS 1133-10.2-1991 包装规程.第10节:金属容器.第2小节:铁桶 Packaging code - Metal containers - Metal drums BS 1133-15-1991 包装规程.第15节:伸缩性捆绑带 Packaging code - Tensional strapping BS 1133-18-1991 包装规程.第18节:玻璃包装 Packaging code - Packaging in glass BS 1133-19-1986 包装规程.包装中使用的干燥剂 Packaging code - Use of desiccants in packaging BS 1133-1986 包装法规.第19节:包装中干燥剂的使用 Packaging code. Use of desiccants in packaging BS 1133-21-1991 包装规程.第21节:再生纤维素薄膜,塑料薄膜,铝箔,挠性多层板和金属化材料 Packaging code - Regenerated cellulose film, films made of plastics, aluminium foil, flexible multilayer structures and metallized materials BS 1133-22-1989 包装规程.第22节:塑料容器包装 Packaging code - Packaging in plastics containers BS 1133-7.6-1988 包装规程.第7节:纸和纸板包装物、袋和包装箱.第6小节:模压纸浆包装 Packaging code - Paper and board wrappers, bags and containers - Moulded pulp packaging BS 1133-8-1991 包装规程.第8节:木箱、木盒和木板条箱 Packaging code - Wooden boxes, cases and crates BS 1262-2002 金属包装.有表面涂料用带圆拉环的金属容器.规范 Metal packaging - Round lever-lid metal containers for surface coatings - Specification BS 1489-1972 电工用包覆绕组线的包装规范 Specification for the packaging of covered winding wires for electrical purposes BS 1683-1987 已加工乳酪包装用铝箔规范 Specification for coated aluminium foil for wrapping processed cheese BS 2548-1986 一般包装用刨花规范 Specification for wood wool for general packaging purposes BS 2782-6 Method 643A-1976 塑料的试验方法.第6部分:尺寸特性.试验方法643A:收缩包装用薄膜热缩变 Methods of testing plastics - Dimensional properties - Shrinkage on heating of film intended for shrink wrapping applications BS 2837-1988 包装箱提升装置用钢铰链与链带组件规范 Specification for steel links and strap assemblies for lifting attachments for packing cases BS 2982-1992 带可卸刀片的外科解剖刀的材料和包装规范 Specification for materials and packaging of surgical scalpels with detachable blades BS 3130-1-1989 包装术语.总则(包括辅助材料) Glossary of packaging terms - General (including auxiliary materials) BS 3130-2-1990 包装术语.第2部分:纸与纸板包装 Glossary of packaging terms - Paper and board packaging BS 3130-5-1994 包装术语.第5部分:塑料和软包装(不包括纸包装) Glossary of packaging terms - Plastics and flexible packaging (excluding paper) BS 3130-6-1981 包装术语.第6部分:木包装 Glossary of packaging terms - Wooden packaging BS 3177-1959 包装用柔性薄片材料的水蒸汽渗透性的测定方法 Method for determining the permeability to water vapour of flexible sheet materials used for packaging BS 3755-1964 食品包装材料气味评定的试验方法 Methods of test for the assessment of odour from packaging materials used for foodstuffs BS 3895-1976 放射性物质安全运输包装的设计、试验及使用指南 Guide to the design, testing and use of packaging for the safe transport of radioactive materials BS 3F 69-1979 硫化橡胶产品包装和识别标志规范 Specification for packaging and identification of vulcanized rubber items BS 4361-15-1988 木工机械.第15部分:单板包装边缘剪切机规范 Woodworking machines - Specification for veneer pack edge shears BS 4672-1-1971 包装件运输和储存危害指南.第1部分:气候性危害 Guide to hazards in the transport and storage of packages - Climatic hazards BS 4672-2-1971 包装件运输和储存危害指南.第2部分:气候性危害(地图与图表) Guide to hazards in the transport and storage of packages - Climatic hazards (maps and diagrams) BS 4879-1973 冰淇淋与冷冻糖果包装用上腊纸板规范 Specification for waxed board for packaging ice cream and frozen confectioneryBS 5167-1978 洗衣粉和清洁剂包装.纤维板盒及筒尺寸和容积 Packages for washing and cleaning powders - Dimensions and volumes of cartons and drums from fibreboard BS 5771-1981 预装食品的包装规范.玻璃和金属容器的容量 Specification for packages for certain pre-packed foodstuffs: capacities of glass and metal containers BS 5N 100-7-2002 飞行器氧气系统和设备.标签与包装品的清洁处理指南 Aircraft oxygen systems and equipment - Guide to cleaning labelling and packaging BS 6455-1984 挠性包装材料溶剂残留成分监测方法 Method for monitoring the levels of residual solvents in flexible packaging materials BS 6720-1986 发行包装用运输标志规范 Specification for marking transit information on packages for distribution BS 6788-2-1990 神经外科植入物.第2部分:可植入式神经刺激器的标志和包装规范 Neurosurgical implants - Specification for marking and packaging of implantable neural stimulators BS 6837-1987 与1200mm1000mm、1200mm800mm托盘和成组载荷模数有关的刚性长方形运输包装的平面尺寸规范 Specification for plan dimensions of rigid rectangular transport packages with a modular relationship to 1200 mm x 1000 mm and 1200 mm x 800 mm pallets and unit loads BS 6988-1989 用于盘碟包装材料的热压带粘合力的测定方法 Method for determination of the adhesion of autoclave tape to tray wrap material BS 7539-1992 包装设计用减震材料性能测定试验方法 Methods for test for determination of properties of cushioning materials for package design purposes BS 7948-1-1997 包装橡胶包用薄膜.不可剥拆的高熔点薄膜 Films for wrapping rubber bales - Non-strippable high melting point films BS 8404-2001 包装.防止儿童打开的包装.药品用不可再封装包装的要求和检验程序 Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for pharmaceutical products BS 984-1990 编织与地毯用纱零售包装净重的测定方法 Method for determination of net mass of retail packages of knitting and rug yarns BS DD 264-2007 包装.医学产品用盲文和其他型式 Packaging - Braille and other formats for medicinal products BS DD CEN/TS 14014-2006 邮政服务.混合邮件.用户业务员文件形式定义.自动邮政处理的信件包装的XML定义 Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling BS DD CEN/TS 14631-2005 邮政服务.容器和包装物的自动识别.容器的资产编号 Postal services - Automatic identification of receptacles and containers - Receptacle asset numbering BS EN 10333-2005 包装用钢.与人和动物消费用食品、产品或饮料接触的扁钢制品.镀锡钢(马口铁) Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Tin coated steel (tinplate) BS EN 10334-2005 包装用钢.与人和动物消费用食品、产品或饮料接触的扁平钢制品.非镀层钢(黑钢板) Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate) BS EN 10335-2005 包装用钢.与人和动物消费用食品、产品或饮料接触的扁平钢制品.非合金电解铬/氧化铬镀钢 Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products or beverages for human and animal consumption - Non alloyed electrolytic chromium/chromium oxide coated steel BS EN 1086-1996 食品运输用口袋.口袋类型和与包装有关的内衬袋的选择推荐规范 Sacks for the transport of food aid - Recommendations on the selection of type of sack and the liner in relation to the product to be packed BS EN 12246-1999 货盘和包装用木材的质量分类 Quality classification of timber used in pallets and packaging BS EN 12248-1999 工业包装用的锯材.允许偏差和最佳尺寸 Sawn timber used in industrial packaging - Permitted deviations and preferential sizes BS EN 12374-1998 包装.软管.术语 Packaging - Flexible tubes - Terminology BS EN 12375-1998 包装.软铝管.壁厚度测定方法 Packaging - Flexible aluminium tubes - Wall thickness determination method BS EN 12377-1999 包装材料.软管.封装气密性试验方法 Packaging - Flexible tubes - Test method for the airtightness of closures BS EN 12546-3-2000 与食品接触的材料和器具.家用保温容器.热包装材料规范 Materials and articles in contact with foodstuffs - Insulated containers for domestic use - Specification for thermal packs BS EN 12566-3-2005 50 PT的小型废水处理系统.第3部分:包装的和/或现场组装的家用废水处理设备 Small wastewater treatment systems for up to 50 PT Part 3: Packaged and/or site assembled domestic wastewater treatment plants BS EN 12702-2000 包装和一次性卫生用品用纸和纸板用胶粘剂.潜在胶粘层阻隔测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of blocking behaviour of potentially adhesive layers BS EN 12703-1999 纸,纸板,包装和一次性卫生产品用胶粘剂.低温柔韧性和冻裂温度的测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of low temperature flexibility or cold crack temperature BS EN 12704-2000 纸,纸板,包装和一次性卫生产品用胶粘剂.含水胶粘剂泡沫形成测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of foam formation for aqueous adhesives BS EN 12726-2000 包装.口径为18.5mm的瓶口用软木塞和锥度明显的瓶塞 Packaging - Cork mouth finish with a bore diameter of 18,5 mm for corks and tamper evident capsules BS EN 12960-2001 纸,纸板,包装和一次性卫生用品用胶粘剂.剪切强度测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance BS EN 13010-2003 包装.单件包装.标记板显示的尺寸和要求 Packaging - Unit packaging - Dimensions and requirements for pegboard display BS EN 13025-1-2005 包装.轻型金属包装箱.第1部分:容积最大不超过40000ml的圆形、柱形和锥形通用金属容器标称填充体积 Packaging Light gauge metal containers Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40000 ml BS EN 13025-2-2005 包装.轻型金属容器.20000ml、25000ml和30000ml标称容量不可移动盖(活盖)圆钢和马口铁容器 Packaging Light gauge metal containers Part 2: Non-removable head (tight head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml BS EN 13025-3-2005 包装.轻型金属容器.20000ml、25000ml和30000ml标称容量可移动盖(活盖)圆钢和马口铁容器 Packaging Light gauge metal containers Part 3: Removable head (open head) round steel and tinplate containers with a nominal capacity of 20000 ml, 25000 ml and 30000 ml BS EN 13026-2001 包装.轻型金属包装.一般用途的非圆形,圆柱形,锥形容积达30000ml的金属容器的标称填充容积 Packaging - Light-gauge metal packaging - Nominal filling volumes for non-round, cylindrical and tapered general use metal containers up to 30 000 ml BS EN 13027-2001 包装.轻型金属包装.由标称容量限定的圆形敞口容器 Packaging - Light-gauge metal packaging - Open-top round cans defined by their nominal gross-lidded capacity BS EN 13028-2001 包装.轻型金属包装.由标称容量限定的有或无填充气体的圆形敞口容器 Packaging - Light-gauge metal packaging - Round open-top cans for beverage products with or without added gas, defined by their nominal filling volumes BS EN 13029-2001 包装.轻型金属包装.塞塑料封闭物的缝隙 Packaging - Light-gauge metal packaging - Apertures for plug-in plastic closures BS EN 13045-2000 包装.圆柱形塑料软管.尺寸和公差 Packaging - Flexible cylindrical plastic tubes - Dimensions and tolerances BS EN 13046-2000 包装.圆柱形金属软管.尺寸和公差 Packaging - Flexible cylindrical metallic tubes - Dimensions and tolerances BS EN 13047-2000 包装.锥形金属软管.尺寸和公差 Packaging - Flexible conical metallic tubes - Dimensions and tolerances BS EN 13048-2000 包装.铝软管.内部清漆膜厚度测量方法 Packaging - Flexible aluminium tubes - Internal lacquer film thickness measurement method BS EN 13054-2001 包装.完全填充运输包装.包裹重心测定方法 Packaging - Complete, filled transport packages - Test methods for the determination of the centre of gravity of a package BS EN 13117-1-2000 运输包装.可重复使用的刚性塑料配送箱.通用配送箱 Transport packaging - Reusable, rigid plastics distribution boxes - General purpose application BS EN 13117-2-2000 运输包装.可重复使用的刚性塑料配送箱.通用试验规范 Transport packaging - Reusable, rigid plastics distribution boxes - General specifications for testing BS EN 13193-2000 包装.包装和环境.术语 Packaging - Packaging and the environment - Terminology BS EN 13199-1-2000 包装.低负荷载运系统.通用要求和试验方法 Packaging - Small load carrier systems - Common requirements and test methods BS EN 13199-2-2000 包装.低负荷载运系统.柱形叠架制(CSS) Packaging - Small load carrier systems - Column Stackable System (CSS) BS EN 13199-3-2000 包装.低负荷载运系统.联结式叠架制(BSS) Packaging - Small load carrier systems - Bond Stackable System (BSS) BS EN 13246-2001 包装.捆扎钢带规范 Packaging - Specification for tensional steel strapping BS EN 13393-2001 包装.边缘保护器的规范 Packaging - Specification for edge protectors BS EN 13394-2001 包装.非金属拉伸带材规范 Packaging - Specification for non-metallic tensional strapping BS EN 13427-2004 包装.包装和包装废弃物欧洲标准的使用要求 Packaging - Requirements for the use of European Standards in the field of packaging and packaging waste BS EN 13428-2004 包装.生产和组成的特殊要求.资源减少的预防 Packaging - Requirements specific to manufacturing and composition - Prevention by source reduction BS EN 13429-2004 包装.重复使用 Packaging - Reuse BS EN 13430-2004 包装.通过材料再循环评定包装可回收性的要求 Packaging - Requirements for packaging recoverable by material recycling BS EN 13431-2004 包装.以能量恢复的形式评定包装可回收性的要求(包括最小次热值规范) Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value BS EN 13432-2000 包装.通过合成及生物降解规定包装可回收性的求.试验计划和包装最终验收评定标准 Packaging - Requirements for packaging recoverable through composting and biodegradation - Test scheme and evaluation criteria for the final acceptance of packaging BS EN 13437-2004 包装和材料回收.回收方法的标准.回收过程和流程图的描述 Packaging and material recycling - Criteria for recycling methods - Description of recycling processes and flow chart BS EN 13439-2004 包装.能源回收率.定义和计算方法 Packaging - Rate of energy recovery - Definition and method of calculation BS EN 13440-2004 包装.回收率.定义和计算方法 Packaging - Rate of recycling - Definition and method of calculation BS EN 13461-2001 包装.圆柱柔性叠层板管道.尺寸和公差 Packaging - Cylindrical flexible laminated tubes - Dimensions and tolerances BS EN 13538-3-2002 睡袋尺寸特性的测定.加载下的容积和易包装性 Determination of dimensional characteristics of sleeping bags - Volume under load and easiness of packing BS EN 13590-2003 包装.各种零售货物运输用柔性装载袋.体积和装载量测定的一般特性和试验方法 Packaging - Flexible carrier bags for the transport of various retail goods - General characteristics and test methods for the determination of volume and carrying capacity BS EN 13593-2003 包装.家用废弃物收集纸袋.类型、要求和试验方法 Packaging - Paper sacks for household waste collection - Types, requirements and test methods BS EN 13626-2003 包装.框形货盘.一般要求和试验方法 Packaging - Box pallets - General requirements and test methods BS EN 13628-1-2002 包装.软性包装材料.应用静态液体上部气体色谱分析法测定剩余溶质.绝对法 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Absolute methods BS EN 13628-2-2002 包装.软性包装材料.应用静态液体上部气相色谱分析法测定残余溶质.工业法 Packaging - Flexible packaging material - Determination of residual solvents by static headspace gas chromatography - Industrial methods BS EN 13920-14-2003 铝和铝合金.废料.废铝包装件 Aluminium and aluminium alloys - Scrap - Scrap from post-consumer aluminium packagings BS EN 13920-15-2003 铝和铝合金.废料.已去除废铝包装件中涂层的铝废料 Aluminium and aluminium alloys - Scrap - Decoated aluminium scrap from post-consumer aluminium packagings BS EN 14045-2003 包装.在规定了合成条件的实际定向试验中包装材料分解的评定 Packaging - Evaluation of the disintegration of packaging materials in practical oriented tests under defined composting conditions BS EN 14046-2003 包装.在可控合成条件下包装材料的最大需氧生物降解性和分解的评定.释放的二氧化碳的分析方法 Packaging - Evaluation of the ultimate aerobic biodegradability and disintegration of packaging materials under controlled composting conditions - Method by analysis of released carbon dioxide BS EN 14047-2003 包装.测定在水介质中包装材料的最终需氧生物降解性.析出二氧化碳分析法 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by analysis of evolved carbon dioxide BS EN 14048-2002 包装.测定在水介质中包装材料的最终需氧生物降解性.封闭式呼吸机需氧量测量方法 Packaging - Determination of the ultimate aerobic biodegradability of packaging materials in an aqueous medium - Method by measuring the oxygen demand in a closed respirometer BS EN 14053-2004 包装.瓦楞或实心纤维纸板制成的包装件.类型和结构 Packaging - Packagings manufactured from corrugated or solid fibreboard - Types and construction BS EN 14054-2004 包装.纸和纸板包装.纸板箱的设计 Packaging - Paper and paperboard packaging - Design of cartons BS EN 14149-2004 包装.完全满运输包装件和成组货件.旋转下落的冲击试验 Packaging - Complete, filled transport packages and unit loads - Impact test by rotational drop BS EN 14182-2002 包装.术语.基本术语和定义 Packaging - Terminology - Basic terms and definitions BS EN 14287-2004 铝和铝合金.包装和包装元件制造用产品的化学成分的具体要求 Aluminium and aluminium alloys - Specific requirements on the chemical composition of products intended to be used for the manufacture of packaging and packaging components BS EN 14375-2005 保护儿童的不可重封口的药品包装.要求及试验 Child-resistant non-reclosable packaging for pharmaceutical products - Requirements and testing BS EN 14391-2004 包装.可折叠铝管.触摸式危险警告 Packaging - Collapsible aluminium tubes - Tactile warnings of danger BS EN 14427-2004 液化石油气(LPG)用可移动的可再充填式全包装复合气瓶.设计和建造 Transportable refillable fully wrapped composite cylinders for liquefied petroleum gases (LPG) - Design and construction BS EN 14477-2004 包装.柔性包装材料.抗击穿性的测定.试验方法 Packaging - Flexible packaging material - Determination of puncture resistance - Test methods BS EN 14479-2004 包装.柔性包装材料.用动态液上气相色谱法测定剩余溶剂.绝对法 Packaging Flexible packaging material Determination of residual solvents by dynamic headspace gas chromatography Absolute method BS EN 14713-2005 纸和纸板、包装和一次性清洁产品用胶粘剂.可能适合粘结的薄膜的摩擦性能测定 Adhesives for paper and board, packaging and disposable sanitary products - Determination of friction properties of films potentially suitable for bonding BS EN 14798-2005 玻璃包装.手动冠形开瓶器.尺寸 Glass packaging Hand-held crown bottle openers Dimensions BS EN 14806-2005 包装.在实验室试验中模拟堆肥条件下初步评价包装材料的分解 Packaging - Preliminary evaluation of the disintegration of packaging materials under simulated composting conditions in a laboratory scale test BS EN 14866-2005 釉瓷和搪瓷.空气与气体和气体与气体热交换器用交流换热、上釉和包装的板材.规范 Vitreous and porcelain enamels - Regenerative, enamelled and packed panels for air-gas and gas-gas heat exchangers - Specifications BS EN 14867-2005 包装.塑料冰冻袋.规范和试验方法 Packaging Plastic freezer bags Specifications and test methods BS EN 14887-2005 玻璃包装.开启软木塞工具.一般要求 Glass packaging Cork removal devices General requirements BS EN 14932-2006 塑料.包装袋用伸缩热塑性薄膜.要求和试验方法 Plastics Stretch thermoplastic films for wrapping bales - Requirements and test methods BS EN 14979-2006 包装.柔性塑料/金属叠层管.S13型喷嘴的尺寸公差 Packaging - Flexible plastic/metal laminate tubes - Dimensions and tolerances of nozzle S 13 BS EN 15208-2007 危险物品的运输槽罐.密封包装运输系统.工作原理和接口规范 Tanks for transport of dangerous goods - Sealed parcel delivery systems - Working principles and interface specifi