traffica Z5.x StepBySteps.doc

Traffica Z5.x TS/TNES Installation step by step1 Hardware Setup 1.1 Hardware Recommendation for TS硬件符合要求是1.2 Hardware Recommendation for TNES硬件符合要求是1.3 Hardware setup steps (missing)2.Software installation2.1 Software Installation prerequsiteWindows Server 2008 Standard x64是Internet Information Server (IIS) FTP server functionality是MDAC (Microsoft Data Access Components) version 2.1 or newer (for information on how to check the version see Appendix C). If MDAC version is older than version 2.1, install a newer version from Traffica CD-ROM: Microsoftmdac_typ.exe是administrator rights是Recommended display settings: 1280 * 1024 resolution, 65535 colours, small fonts是No remote control software installed*是检查TEMP log目录是Traffica用户创建是检查时间设置是检查License是网元版本是否匹配是2.2 Installing TS (missing)QA List （常见问题列表）Q1 Q2 Q3 Q4 Q5 2.3 Installing TNES1. Insert Traffica CD-ROM into CD-ROM drive. Setup.exe should start automatically. If not, double click the setup.exe file in the root of the CD.2. Select Install. Click Next -.3. Select TNES package. Click Next -.4. Locate the license file using the Browse button. Click Next -.5. Enter the IP address and the port number of the computer where Traffica Configuration and User Server (CUS) is installed. Click Next -.6. Select specific adaptation(s). Enter the workspace path. In customer installation select the D:Database radio button. Click Next -.7. To start installation, click Start.8. 重起服务器QA List （常见问题列表）Q1 Q2 Q3 9.TNES Step 2TNES Step 3TNES Step 4TNES Step 5TNES Step 6TNES Step 7安装完成后重启机器。2.4 Installing Traffica Customer Care (missing)QA List （常见问题列表）Q1 Q2 Q3 Q4 Q5 2.5 Installing Traffica Client and Traffica applications(missing)QA List （常见问题列表）Q1 Q2 Q3 Q4 Q5 3. Configuring Traffica3.1 Configuring TS （new TS installation ）Step 1Configuring CUS 必须Step 2Configuring RTT Server 可选Step 3Configuring Traffic News Server 必须Step 4Configuring Traffic News Web Server 必须Step 5Configuring Traffica Email notifications 可选Step 6Configuring Database Export Server 可选Step 7Configuring Traffic Views Main Server 可选Step 8Configuring Traffic Views Extension Server or Views User Extension Server 可选Step 9Configuring Traffic Views when NAT is used 可选Step 10Configuring Ntalfo 可选Step 11Configuring Traffica Web Server 可选Step 12Configuring Traffica KPIE Measurement Server 可选Step 13Configuring NTMS Interface 可选Step 14Configuring HP Insight Manager 可选QA List （常见问题列表）Q1 Q2 Q3 Q4 Q5 3.2 Configuring TNES 3.2.1 Steps on TNESStep1Configuring TCP/IP settings 必须Step2Logging on Traffica 必须Step3Configuring a new data source 必须Step4Connecting to a data source 必须Step5Configuring alarms 可选Step6Configuring data redirector 可选Step7Configuring NetAct Monitor interface (Ntalfo) 可选QA List （常见问题列表）Q1 Q2 Q3 Q4 Q5 Step1 配置ip，mask，gatewayStep2 使用traffica登录系统Step3 配置数据源 Definitions Data Sources.点击 new点击RNC按钮19全选，port：60000（默认） ip：77（RNC OMU 的ip）点击ok点击okSet as default点击save，close。TNES Step 3Step 4连接数据源 Action Connect.选择RNC-03点击yes右下角状态栏变绿 connection OK，点击closeTNES Step 43.2.2 Steps on TS ( TS already exists )Step1配置TNES Definition必须Step2在admin tool 里配置网元必须Step3配置RTT server必须Step4配置RTT EXPORT 可选Step5 可选Step 1 修改TNES定义文件Step 2在admin tool 里配置网元Properties 增加NAME:TrafDBM_port VALUE :1250 完成后点击ok完成后tnes的traffica DBH功能打开。TS Step 2Step 2 配置RTT serverDefinitions Remote Communications Lower Trafficas.newokSave - close配置数据源okSave - closeTS Step 33.3 Configuring Traffica Customer C