安全u盘使用说明书(英文版).doc

User ManualUSB2.0Medisk usage1.New Disk Initial PIN is 112233.2.Press Key button(both red&green LED blink),PIN inputPress key(green LED blink) to confirm disk unlocked,plug into PC and start to use.Once pull out from PC,MeDisk locks automatically.3.Set PIN:After unlock by default PIN,press the key button for 3 seconds(both red&gree LED illuminate),enter a new PINPress Key(red&greee blink in unison),re-enter the PINPress key(green LED inlluminate),the new PIN is accepted and successful.Change PIN same as set PIN. IndicatorsLED IndicatorsGreen BlinkingUnlockedConstant greenConnected to PCRed BlinkingInvalid operateConstant redResetRed & green blink togetherAccepting PIN inputAlternating red &green blinkingErrorConstant red&green togetherAccepting new PINBlue LedWorkingAll LEDs offSleepingSpecial Features1.If no attaching to Pc within 30seconds,disk will be re-locked.2.When PC in sleep mode,disk also in sleepmode.All indicators will be off.3.After 10 consecutive incorrect PIN attemps,disk is reset and data will be erased.Now press key for 3 seconds,reset PIN and plug into PC will require reformatting.4.Reset:press “9 “and hold the key simultaneously for 3 seconds.Enter 110 and then press key.Disk will be reset,return to default state,but PIN has been erased.For reuse disk,pls set a new PIN and reformat disk. Notice1.Dont forget PIN.The losted PIN and data cannot be broken by manufacture factory.Reuse disk either remember PIN or reset disk. 2.Dont worry about internal battery.Batterycan be used about 10 years.Batter will be charging when plug into PC.3.PIN required 6-15 digits in length,except consecutive digits”1234567890”or sole digit”888888”.Others1.Without PC to set PIN and unlock the disk,avoid the PIN stole by hack