阵列卡报错故障.doc

Error code (错误代码)可能故障原因1xxx（Microcode checksum error）（微码校验错误）ServeRAID controller（阵列卡）2xxx（Code DRAM error）（Code DRAM错误）1. Install download jumpers, flash latest level BIOS and firmware for controller. Remove jumpers.（检查download跳线的正确设置，升级阵列卡的BIOS和firmware到最新版本）2. ServeRAID controller（阵列卡）3000-31XX (Code DRAM error)（Code DRAM错误）1. Install download jumpers, flash latest level BIOS and firmware for controller. Remove jumpers.（检查download跳线的正确设置，升级阵列卡的BIOS和firmware到最新版本）2. ServeRAID controller（阵列卡）3200 (Code DRAM error)（Code DRAM错误）1. Install download jumpers, flash latest level BIOS code and firmware for controller. Remove jumpers.（检查download跳线的正确设置，升级阵列卡的BIOS和firmware到最新版本）2. ServeRAID controller.（阵列卡）3300 (ServeRAID-5i only)（仅针对5i阵列卡）穞abInstall the ServeRAID-5i controller in an extended PCI option slot. See the documentation that came with the server for more information.穞ab（安装5i阵列卡到指定的PCI插槽）3E20 (ServeRAID-5i only)（仅针对5i阵列卡）1. Remove the ServeRAID-5i controller from its slot and install it in the proper PCI option slot.（安装5i阵列卡到指定的PCI插槽）2. Verify that the ServeRAID-5i controller is supported in this server.（确认该服务器能够支持5i阵列卡）3. ServeRAID-5i controller（5i阵列卡）4. System board（主板）3E2x1. Reseat the ServeRAID controller.（重新安装阵列卡）2. Flash latest level of BIOS code and firmware for controller.（升级阵列卡的BIOS和firmware到最新版本）3. ServeRAID-5i controller（5i阵列卡）4. Integrated RAID controller on server（主板集成的阵列卡）4xxx thru 5xxx (Code DRAM error)（Code DRAM错误）1. Install download jumpers, flash latest level BIOS code and firmware for controller; then, remove jumpers.（检查download跳线的正确设置，升级阵列卡的BIOS和firmware到最新版本）2. ServeRAID controller（阵列卡）6xxx (Cache DRAM error) (ServeRAID-4H only)（Code DRAM错误）（仅限于4H阵列卡）1. Reseat daughter card.（重新安装一下子卡）2. Install download jumpers, flash latest level BIOS code and firmware for controller; then, remove jumpers.（检查download跳线的正确设置，升级阵列卡的BIOS和firmware到最新版本）3. ServeRAID controller（阵列卡）7xxx thru 8xxx (Host/local PCI bus interface error)（PCI BUS报错）1. Flash latest level of BIOS code and firmware for controller.（升级阵列卡的BIOS和firmware到最新版本）2. If ServeRAID-4x controller, replace controller.（如果使用的是4系列阵列卡，需要替换掉该设备）3. If ServeRAID-5i controller, integrated RAID controller on the server.（如果使用5i阵列卡，可能是由于主板集成RAID控制器引起）90031. Flash latest level of BIOS code and firmware for controller.（升级阵列卡的BIOS和firmware到最新版本）2. Confirm that this controller is a supported option for this system.（请确认该设备能够在该服务器上安装，符合硬件兼容性）3. ServeRAID controller.（阵列卡）4. Integrated RAID controller on the server.（主板集成的RAID控制器）9xxx thru BZxx (SCSI bus error caused by cables, termination, defective drives, and so on).Zrefers to the specific channel or channels that cause the error.（SCSI通道报错，可能是SCSI线，终结器，故障硬盘等引起的）Z指向具体的某个通道或者引起错误的通道1. Follow indications at POST (ISPR) error procedures in theHardware Maintenance Manual (HMM). Follow those instructions before continuing with the next steps listed in this index.（先参考硬件手册中POST报错解决方法，来分析出错的具体设备）2. Hard disk drive cable（检查硬盘连线）3. Hard disk drive backplane（检查硬盘背板）4. Hard disk drive（检查硬盘本身）5. ServeRAID controller（阵列卡）EFFE (Firmware code corrupt or download jumpers are place)（download跳线不正确或者阵列卡Firmware程序错误）1. Flash latest level BIOS and firmware for controller; then,remove jumpers.（升级阵列卡BIOS和firmware到最新版本，去掉跳线）2. ServeRAID controller（阵列卡）FFFF or other code not listed（FFFF以及其余没有列出的报错代码）1. Follow indications at POST (ISPR) error procedu