各国电压及认证标志一览.doc

United States 美国UL Listing MarkUL Classification MarkUL Recognized Component MarkNature:VoluntaryVoluntaryVoluntaryRequirements: Safety SafetySafetyFactory Inspection:Yes YesYesCountry FactsVoltage:120/240V (single phase)208/240V (three phase)Frequency:60HzCB Scheme Member Country:Yes The UL Mark is the most widely recognized evidence of a products compliance with U.S. safety requirements. To U.S. consumers, manufacturers, regulatory authorities and others, the UL Mark is the most familiar and trusted safety symbol. More than 19 billion UL Marks appear on new products every year. Listing ServiceULs Listing service evaluates products for application of the widely recognized UL Certification Mark. The UL Listing Mark on a product tells that samples of that complete product have been tested by UL and found to be in compliance with the applicable UL requirements. Classification ServiceULs Classification service evaluates industrial, commercial and other products for specific hazards and performance under limited conditions or regulatory codes. Products carrying this mark have been evaluated for a certain range of hazards or suitability for use under specific conditions. Typically, UL Classification service applies to building materials and industrial equipment. Component Recognition Service The UL Recognized Component Mark is used on components that are incomplete or restricted in performance capabilities, and intended for later use in a complete product or system Listed or Classified by UL. This mark is found on a wide range of products, including some switches, power supplies, printed wiring boards, some kinds of industrial control equipment and thousands of other products. UL Recognized Components in any end product does not necessarily mean that the product itself is UL Listed or Classified. Canada 加拿大C-UL Listing MarkCanadian Classification MarkCanadian Recognized Component MarkNature:VoluntaryVoluntaryVoluntaryRequirements: Safety SafetySafety Factory Inspection:Yes YesYesCountry FactsVoltage:120/240V (single phase)208/240V (three phase)Frequency:60HzCB Scheme Member Country:YesUL is accredited by the Standards Council of Canada (SCC) as a Testing Organization (TO) and Certification Body (CB) to evaluate products intended for the Canadian market and to authorize clients to label those products with the special UL Mark for Canada. This mark is officially recognized in all provinces and territories throughout Canada. C-UL Listing MarkProducts with this mark have been evaluated to Canadian safety requirements. The C-UL Listing Mark applies to products including appliances, computer equipment, vending machines, household burglar alarm systems, lighting fixtures, and many other categories. Canadian Classification Mark This mark indicates that UL has used Canadian standards to evaluate the product for hazards or properties under certain specified conditions or regulatory codes. Samples of products carrying this mark have been evaluated for a certain range of hazards or suitability for use under specific conditions. Canadian Recognized Component MarkThis mark is specifically used on components that are part of a larger product or system. Component parts intended for exporting to Canada carry the Recognized Component mark C.United States-Canadian Dual Certification 美国+加拿大For companies that sell their products in both the United States and Canada, ULs combination Canada/U.S. Mark can give you the maximum product acceptance. With this mark, regulatory authorities in both countries will readily identify your product as meeting applicable requirements.UL encourages those manufacturers with products certified for both countries to take advantage of this combined mark, though separate UL Marks for the United States and Canada continue to be acceptable. C-UL US Listing This mark indicates compliance with both Canadian and U.S. safety requirements. UL encourages those manufacturers with products certified for both countries to use this combined mark, but they may continue to use separate UL Marks for the United States and Canada. C-UL US Classification This Classification Markindicates compliance with both Canadian and U.S. standards for specific hazards and performance under specified conditions. The Canada/U.S. UL Mark offers a simplified, combined service for manufacturers who wish to classify products for both countries. Component Recognition ServiceThis mark is used on components certified by UL to both Canadian and U.S. requirements. A UL Recognized component is part of a larger product or system and does not render the end product itself to be UL Listed or Classified. Argentina 阿根廷AR-UL Mark / S MarkAR-UL Mark / S MarkNature:Mandatory (except for products with exemption)Requirements:Safety Factory Inspection:YesCountry Facts Voltage:220V (single phase) 380V (three phase)Frequency:50Hz CB Scheme Member Country:Yes The Argentine certification system is mandated by the Resolution 92/98 passed in 1998. Effective Dec 31, 2002, products in scope must demonstrate compliance through a certification body accredited by the Argentina Accreditation Organization (OAA). Manufacturers can affix the Argentina S-Mark on products in compliance. The Argentina S-Mark is granted basing on national IRAM* standards or IEC standards. In fact, IEC standards are largely adopted in developing IRAM standards.Resolution 92/98 was implemented in phases to incorporate a broad range of products into the mandatory safety requirements.UL is accredited by OAA and recognized by the government to test and evaluate products for compliance with the S-Mark requirements. UL is your resource for Argentina market acceptance Most of the UL laboratories near to you can conduct testing locally and turn around your S-Mark certification quickly. The S-Mark is based on IEC standards. UL can combine the S-Mark application with other certification applications like the UL Mark, GS Mark, CE Marking, and CCC Mark. UL help you eliminate redundant testing to save time and cost. If you already have a CB Report, UL can issue the Argentina S-Mark for you if there is no national difference, or test any Argentine national differences that apply then issue the S-Mark for you. ULs specialists in South America provide the knowledge, guidance and advice you need to sell successfully in Argentina and other South American markets. Most standards and related documentation are done in Spanish. ULs Argentine certification staff can help break the language barrier and smoothen your application process. Brazil 巴西INMETRO Certification / BR-UL MarkINMETRO Certification / BR-UL MarkNature:Depending on product categoryRequirements:Safety Factory Inspection:Required Country FactsVoltage:110V (single phase)220V (three phase)Frequency:60Hz CB Scheme Member Country:YesThe National Institute of Metrology, Standardization and Industrial Quality (INMETRO) is the national accreditation body for Brazil.Products meeting Brazilian requirements and certified by an INMETRO accredited organization must carry the mandatory INMETRO Mark alongside the mark of the certification organization, such as the UL-BR Mark.The INMETRO Mark can be applied to both mandatory and voluntary Brazilian programs. Mandatory products Medical device Circuit breakers Electrical equipment used in hazardous locations Equipment for gas systems (pressure regulators and hoses) Switches, plugs and receptacles Ballasts Wires and cables Voluntary products Household appliances IT equipment Consumer electronics Luminaries UL is one of the few non-Brazilian certification organizations accredited by INMETRO to test and evaluate all mandatory products for Brazilian national requirements.ULs INMETRO Program for Brazil Almost any UL affiliates near to you can conduct INMETRO testing service locally and turn around the market approval you need on time. Since Brazilian standards are mostly IEC based, UL can tie your Brazilian certification program with other applications like the UL Mark, GS Mark, CE Marking, CCC Mark, eliminating redundant testing and saving time and cost. If you already have a CB Report, UL can issue the INMETRO Mark for you if there is no national difference, or test any Brazilian national differences applicable to your product. ULs specialists in Brazil will offer you the knowledge and resource to speed up your penetration to the South American market. Most standards, documentation and related communications are done in Portuguese. ULs staff in Brazil can break the language barrier and help you navigate through the process. ANATEL mandatory certification Information technology companies that export goods to Brazil need to find out prior to export if their goods require mandatory certification. UL can assist in obtaining this information through ANATEL (National Telecommunication Agency), which provides the specific criteria, rules and Standards. The two-step certification process require: The Certificate of Conformity through an OCD (Designated Certification Organization) The Homologation License through ANATEL UL do Brasil is a Certification Organization Designated by ANATEL in Brazil and can provide companies from all over the world with the necessary product certification and to help with the product registration at ANATEL. Mexico 墨西哥(拉丁美洲国家)NOMNature:MandatoryRequirements:SafetyFactory Inspection:Required Country FactsVoltage:127/220V (single phase)220V (three phase)Frequency:60HzCB Scheme Member Country:Yes The NOM (Normas Oficiales Mexicanas) Mark is a mandatory Mexican mark for electrical products, gas appliances, wires and cables, electronic and telecommunications products.UL is the only worldwide certification organization that has agreements with Normalizacin y Certificacin Electrnica (NYCE) and Asociacin Nacional de Normalizacin Certificacin del Sector Elctrico (ANCE) to help you obtain the NOM Mark. European Union .欧洲The European Union (EU) consists of 25 countries in Europe, namely Austria, Belgium, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden and the United Kingdom.UL offers customized certification service for all safety standards commonly accepted in the EU market. They are the CE Marking, the GS Mark and the ENEC Mark. The CE Marking is mandatory for getting into the European Economic Area . It is the manufacturers self-declaration that the product complies with the requirements of the relevant European laws or Directives. The GS Mark is a German safety mark. It indicates that the product complies with the safety requirements of the European Standards with German National deviations. The GS Mark is voluntary and is highly regarded by consumers.ENEC (European Norms Electrical Certification) is a voluntary mark for luminaries, luminary components, electrical and electronic office and IT equipment, safety isolating and separating transformers, power supply units and switches for household appliances. It certifies the compliance of a product with the European Norm (EN) standards. Non-EU Countries CroatiaNorwaySwitzerlandUkraineRussiaCroatiaC Mark Nature: Mandatory - Safety and Radio Frequency Interference (RFI) emissionRequirements: SafetyFactory Inspection :RequiredOrganization:KONCARCountry FactsVoltage:230V (single phase)380V (three phase) Frequency:50HzCB Scheme Member Country:No Norway Nordic Certification Service (NCS) One test to reach four countries Under the Nordic reciprocal agreement among Denmark, Finland, Norway and Sweden, the four countries mutually accept test results of one another. It means that once you have obtained the D-Mark and UL can help you get acceptance to any or all of the four Nordic markets without additional testing.Nature: VoluntaryRequirements: Safety, EMCFactory Inspection :RequiredCountry FactsVoltage:230V (single phase)380V (three phase) Frequency:50HzCB Scheme Member Country:YesSwitzerlandSEV MarkNature: VoluntaryRequirements: SafetyFactory Inspection :YesCountry FactsVoltage:230V (single phase)380V (three phase) Frequency:50HzCB Scheme Member Country:YesUkraineUKR TestNature: MandatoryRequirements: Safety, EMC Factory Inspection :RequiredCountry FactsVoltage:230V (single phase)380V (three phase) Frequency:50HzCB Scheme Member Country:YesRussiaGost-R Mark Nature: MandatoryRequirements: Safety, EMCFactory Inspection :RequiredCountry FactsVoltage:230V (single phase)380V (three phase) Frequency:50HzCB Scheme Member Country:YesGOST R Certification is based on safety testing (IEC standards with Russian deviations), and EMC testing. It is mandatory for a wide range of products, including any products that contain food, such as freezers and refrigerators.Working with VNIIS (a member of the CB Scheme), the Executive Board of the Notified Certification Body (NCB) GOST (State Committee for Standardization and Metrology) Re and GOSSTANDART of Russia, UL can locally test and evaluate electrical products to GOSSTANDARTs requirements. UL is one of the first laboratories outside Russia working directly with GOSSTANDART. Steps to GOST R Certification: UL will develop and submit a CB Scheme test report and certificate performed according to the applicable standard. VNIIS accepts testing results performed based on the CB Bulletin-listed standards. The EMC testing and report should be conducted by UL or by an accredited EMC lab. If a testing lab other than UL has conducted the EMC tests, test results must be reviewed by UL, and a statement issued from UL. UL has an agreement with VNIIS that allows the certification process to run faster and no product samples are required. The GOST R certificate obtained through VNIIS/ UL is valid for three years and the license to use the GOST R Mark is valid for one year. Renewal can be done through UL International Demko A/S after an annual inspection. Yearly factory inspections are required for the GOST R mark. VNIIS Gost Re accepts inspections performed by UL. Hygienic Certificate Any product that can contain food products is regarded as a hygienic product, for example, freezers and refrigerators. A hygienic certificate from the Russian Ministry of Health is required for obtaining GOST R certification. It takes about one week for UL to help the manufacturer to obtain a hygienic certificate. Australia / New Zealand C-Tick MarkRCM MarkName: C-Tick MarkRegulatory Compliance Mark (RCM)Nature: MandatoryMandatoryRequirements:EMCSafety, EMCFactory Inspection:No Yes Country FactsVoltage:240/415V (single phase)415V (three phase) Frequency:50Hz CB Scheme Member Country:Yes Electrical products supplied in Australia must comply with both electrical safety and EMC requirements. Electrical Safety RequirementsIn Australia, the conformity assessment system for electrical safety is a State/Territory responsibility. Each regulatory authority administers a reciprocal uniform Approvals Scheme provided by the (Electrical Safety Act of 1945). This scheme classifies electrical articles as either Declared or Non-declared: Declared Articles must comply with relevant Australian safety standards and obtain a Certificate of Approval from a State authority. Non-declared electrical appliances and equipment may be sold without approval. However, it is the responsibility of the vendor, manufacturer or importer to ensure electrical safety. EMC RequirementsEMC requirements in Australia are regulated by a self-regulation scheme known as The EMC Framework (Radiocommunications Act 1992). All electronic products that fall within the scope of the Framework must comply with Australian standards and gain approval from the Australian Communications Authority for using the C-Tick Mark. A Regulatory Compliance Mark (RCM) is also issued to products that have met both electrical safety and EMC requirements. Any Australian Safety Mark is also accepted in New Zealand. China CCC MarkNature: MandatoryRequirements: Safety, EMCFactory Inspection :RequiredCountry FactsVoltage:220V (single phase)380V (three phase)Frequency:50HzCB Scheme Member Country:YesBeginning August 1, 2003, products subject to compulsory certification cannot be imported or distributed in China without first being certified in accordance with China Compulsory Product Certification (CCC) requirements. The CCC scheme replaces the former CCIB and CCEE product safety certification schemes. Imports lacking the CCC Mark will be held at the border by Chinese Customs and subject to penalties. UL-CCIC Company Limited (UL-CCIC) a joint venture of Underwriters Laboratories Inc. and China National Import and Export Commodities Inspection Corporation was approved by the Certification and Accreditation Administration of the Peoples Republic of China (CNCA) as a registered CCC agent to assist domestic and overseas clients with CCC certification a