各国管道标准.doc

美国管道标准(ANSI pipe standards)编号中文名称英文名称ANSI B11.15-2001 管道和型材弯曲机的制造、维护和使用的安全要求 Pipe, Tube, and Shape Bending Machines, Safety Requirements for Construction, Care, and Use ANSI GPTC Z 380.1 1998 Addendum 3-2000 燃气传输和分配管道系统指南 1998-2000 Guide for Gas Transmission and Distribution Piping Systems 1998-2000 ANSI LC-1-2005 使用波纹不锈钢管(CSST)的燃气管道系统 Fuel Gas Piping System Using Corrugated Stainless Steel Tubing (CSST) (same as CSA 6.26) ANSI Man D/ACCA 1-2002 住宅管道的设计 Residential Duct Design ANSI ManD/ACCA 1-2002 住宅管道设计 Residential Duct Design ANSI Z83.8-2005 气体装置加热器和燃气管道炉 Gas Unit Heaters and Gas-Fired Duct Furnaces (same as CGA 2.6) ANSI/ACCA ManJ 2 Addendum C-2004 MJB的管道阻力增益/损失修订版 Duct Gain/Loss Revisions to MJ8 ANSI/API 1104-1999 管道和相关设施的焊接 Welding of Pipelines and Related Facilities ANSI/API 1160-2001 危险液体管道的管理系统完整性 Managing System Integrity for Hazardous Liquid Pipeline ANSI/API 570-2000 管路检验规程.工作中管道系统的检查、修理、更替及核定(第2版、含修改件1) Piping Inspection Code - Inspection, Repair, Alteration, and Rerating of In-Service Piping Systems (Second Edition, Including Addendum 1) ANSI/API RP1162-2003 管道操作者的公共注意项 Public Awareness Programs for Pipeline Operators ANSI/API RP5A 5-2005 新套管、管道和平端钻管的现场检验.第7版 Field Inspection of New Casing, Tubing, and Plain-End Drill Pipe, 7th Edition ANSI/API SPEC17E-2003 水下临时管道及电缆规范 Specification for Subsea Umbilicals ANSI/ASAE S376.2-1998 地下热塑性塑料灌溉管道的设计、安装和性能 Design, Installation, and Performance of Underground Thermoplastic Irrigation Pipelines ANSI/ASHRAE 130-1996 评定管道式空气终端装置的测试方法 Methods of Testing for Rating Ducted Air Terminal Units ANSI/ASHRAE/SMACNA 126-2000 HVAC空气管道的试验方法 Methods of Testing HVAC Air Ducts ANSI/ASME A112.1.2-2004 管道系统中的气隙 Air Gaps in Plumbing Systems ANSI/ASME A112.18.1-2005 卫生管道配件 Plumbing Fixture Fittings ANSI/ASME A112.18.2-2005 卫生管道用污水管配件 Plumbing Fixture Waste Fittings ANSI/ASME A112.19.2-2003 抽水马桶与小便池水的釉瓷管道装配和水压要求 Vitreous China Plumbing Fixtures and Hydraulic Requirements for Water Closets and Urinals ANSI/ASME A112.20.1-2004 高纯度管道系统安装工的资格鉴定 Qualification of Installers of High Purity Piping Systems ANSI/ASME A112.20.2-2004 管道系统用挡火物系统和设备的安装工资格鉴定 Qualification of Installers of Firestop Systems and Devices for Piping Systems ANSI/ASME A112.4.14-2004 卫生管道系统中使用的手动直角转弯截止阀 Manually Operated, Quarter-Turn Shutoff Valves for Use in Plumbing Systems ANSI/ASME A112.6.1M-1997 公共用离开地面的管道工程装置的支架 Supports for Off-the-Floor Plumbing Fixtures for Public Use ANSI/ASME A13.1-1996 管道系统识别图解 Scheme for the Identification of Piping Systems ANSI/ASME B16.33-2002 125表压及以下的气体管道系统中使用的手动金属气体阀 Manually Operated Metallic Gas Valves for Use in Gas Piping Systems up to 125 psig ANSI/ASME B16.44-2002 家用管道系统中使用的手工操作的金属气体阀门 Manually Operated Metallic Gas Valves for Use in House Piping Systems ANSI/ASME B16.44a-1997 家庭管道系统中用手动金属气阀 Manually Operated Metallic Gas Valves for Use in House Piping Systems ANSI/ASME B31.1-2001 动力管道 Power Piping ANSI/ASME B31.11-2002 泥浆输送管道系统 Slurry Transportation Piping Systems ANSI/ASME B31.1a-2005 动力管道 Power Piping ANSI/ASME B31.1b-2004 动力管道 Power Piping ANSI/ASME B31.5-2001 制冷管道 Refrigeration Piping ANSI/ASME B31.8-2003 气体输送和分配管道系统 Gas Transmission and Distribution Piping Systems ANSI/ASME B31.8S-2004 燃气管道的管理系统完整性 Managing System Integrity of Gas Pipelines ANSI/ASME B31.9-2004 建筑物服务设施用压力管道标准 Building Services Piping Code for Pressure Piping ANSI/ASME B31G-1991 测定锈蚀管道残留强度的手册 Manual for Determining the Remaining Strength of Corroded Pipelines ANSI/ASME B32.5-1977 除管道外管状金属产品的最优米制尺寸 Tubular Metal Products Other Than Pipe, Preferred Metric Sizes for ANSI/ASME MFC-16M-1995 用电磁流量仪测量封闭管道中液体流量 Measurement of Fluid Flow in Closed Conduits by Means of Electromagnetic Flowmeters ANSI/ASME MFC-18M-2001 用可变面积计量计测量管道中的液体流量 Measurement of Fluid Flow in Pipes Using Variable Area Meters ANSI/ASME MFC-3M-1-2004 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第1部分:总则 Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 1-General ANSI/ASME MFC-3M-2-2004 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第2部分:孔板 Measurement of fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 2-Orifice Plates ANSI/ASME MFC-3M-3-2004 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第3部分:喷嘴和文杜利喷嘴 Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi-Part 3 - Nozzles and Venturi Nozzles ANSI/ASME MFC-3M-4-2004 用孔板、喷嘴和文杜利流量计测量管道中液体流量.第4部分:文杜利流量计 Measurement of Fluid Flow in Pipes Using Orifice, Nozzle, and Venturi - Part 4 - Venturi Meters ANSI/ASME MFC-5M-1985 用过渡时间超声流量计测量密封管道中的液体流量 Liquid Flow in Closed Conduits Using Transit-Time Ultrasonic Flow Meters, Measurement of ANSI/ASME MFC-6M-1998 用涡流流量计测量管道中的液体流量 Fluid Flow in Pipes Using Vortex Flow Meters, Measurement of ANSI/ASSE 1001-2001 应用管道的大气式真空制动器 Pipe-Applied Atmospheric-Type Vacuum Breakers ANSI/ASSE 1051-1998 污水管道系统用气体导入阀 Air Admittance Valves for Plumbing Drainage Systems ANSI/ASTM D1599-1999 塑料管材、管道和管件短时液压故障压力试验方法 Test Method for Short-Time Hydraulic Failure Pressure of Plastic Pipe, Tubing, and Fittings ANSI/ASTM D2235-2004 ABS塑料管道和配件用液状粘固剂规范 Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings ANSI/ASTM D2564-2004 聚氯乙烯塑料管道系统用液状粘固剂规范 Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems ANSI/ASTM D2680-2001 ABS和PVC复合管道规范 Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping ANSI/ASTM D2837-2004 获得热塑性管道材料静水压设计基数的试验方法 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials ANSI/ASTM D3138-2004 丙烯腈-丁二烯-苯乙烯共聚物和聚氯乙烯无压管道系统构件之间转换接头用液状粘固剂规范 Specification for Solvent Cements for Transition Joints between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components ANSI/ASTM D3261-1997 聚乙烯塑料管材和管道用对接热融合聚乙烯塑料管件规范 Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing ANSI/ASTM D4396-1999 非承压管道(X-15-358)用硬质聚氯乙烯(PVC)和相关塑料化合物规范(08.04) Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related Plastic Compounds for Non-Pressure Piping Products (X-15-358) (08.04) ANSI/ASTM D5926-2004 水、废水和排气(DWV)、下水道、卫生设施和暴雨管道系统用聚氯乙烯垫圈的规范 Specification for Poly(Vinyl Chloride) (PVC) Gaskets for Drain, Waste and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems ANSI/ASTM D6070-2002 预组装电线和电缆用光壁可盘绕聚乙烯(PE)管道物理特性试验方法 Test Methods for Physical Properties of Smooth-Wall, Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable ANSI/ASTM E2231-2003 防火焰扩散和隔烟管道和导管隔离层的安装和样品制备的标准实施规范 Standard Practice on Specimen Preparation and Mounting for Pipe and Duct Insulation for Flame Spread and Smoke Obscuration ANSI/ASTM F1006-1997 船用管道装置用液滴分离器规范 Specification for Entrainment Separators for Use in Marine Piping Applications ANSI/ASTM F1007-1997 船用套装滑动型管道膨胀节规范 Specification for Pipe-Line Expansion Joints of the Packed Slip Type for Marine Application ANSI/ASTM F1025-1994 加强或修补聚乙烯气体承压管道孔洞用全环绕型带夹选用导则 Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe ANSI/ASTM F1057-2005 利用热循环技术评估压塑聚乙烯(PVC)管道质量的实施规程 Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique ANSI/ASTM F1120-1987 管道设备用环形金属波纹膨胀连接件的规范 Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications ANSI/ASTM F1155-1998 管道系统材料的选择和应用规范 Practice for Selection and Application of Piping System Materials ANSI/ASTM F1201-1988 0oF以上的管道设备中流体调节器配件的规范 Specification for Fluid Conditioner Fittings in Piping Applications Above 0oF ANSI/ASTM F1365-1991 采用柔性合成橡胶密封件的塑料地下管道接头耐水渗透性试验方法 Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints which Use Flexible Elastomeric Seals ANSI/ASTM F1417-1996 使用低压空气对塑料自流排水管道进行安装验收的试验方法 Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low Pressure Air ANSI/ASTM F1429-1999 用柔性合成橡胶密封件固定在套桶中的塑料地下管道接头组合力试验方法 Test Method for Assembly Force of Plastic Underground Conduit Joints that Use Flexible Elastomeric Seals Located in the Bell ANSI/ASTM F1476-2001 管道设带衬垫的机械连接件性能规范 Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications ANSI/ASTM F1548-2001 管道设备带衬垫的机械连接件配件性能规范 Specification for the Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications ANSI/ASTM F1563-2001 聚乙烯(PE)燃气管道挤压工具规范 Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing ANSI/ASTM F1697-2002 聚氯乙烯 (PVC) 排污管道和配件规范 Specification for Poly (Vinyl Chloride) (PVC) Drain, Waste and Pipe and Fittings ANSI/ASTM F1698-2002 现有排污管和管道修复用聚氯乙烯管线衬里和水泥薄浆安装惯例 Practice for Installation of Poly (Vinyl Chloride) (PVC) Linear and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits ANSI/ASTM F1735-2002 修复现有的人可进入的污水管道用PVC衬里的聚氯乙烯(PVC)异型带材规范 Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liner for Rehabilitation of Existing Man-Entry Sewers and Conduits ANSI/ASTM F1741-2005 现有排水管和管道修复用机械螺旋缠绕聚氯乙烯(PVC)内衬管安装的实施规程 Practice for Installation of Machine Spiral Wound Poly Vinyl Chloride (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits ANSI/ASTM F1743-1996 通过现场硫化热固性树脂管的现场拉入安装对已有管道进行修复的操作规程 Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-place Installation of Cured-in-place Thermosetting Resin Pipe (CIPP) ANSI/ASTM F1871-2002 现有排污管和管道修复用波纹状/形成聚氯乙烯管道形状规范 Specification for Folded/formed Poly (Vinyl Chloride) Pipe Type a for Existing Sewer and Conduit Rehabilitation ANSI/ASTM F1901-2004 屋顶排水系统用聚乙烯管道和配件规范 Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems ANSI/ASTM F1924-2005 外径可控的聚乙烯供气管道用塑料机械配件规范 Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing ANSI/ASTM F1947-2004 折叠式聚氯乙烯管(PVC)装进现有污水管和下水管道中的实施规程 Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits ANSI/ASTM F1962-1999 包括渡口在内的障碍物下安放聚乙烯管道时最大水平方向打眼指南 Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings ANSI/ASTM F2014-2000 管道非增强挤制T形接头规范 Specification for Non-Reinforced Extruded Tee Connections for Piping Applications ANSI/ASTM F2019-2003 将玻璃纤维增强塑料(GRP)现场硫化热固性树脂管(CIPP)现场拖拉并安装进已有管道的操作规程 Practice for Existing Pipelines and Conduits by the Pulled-in-Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP) ANSI/ASTM F2145-2001 外径可控聚酰胺11管及管道系统用聚酰胺11(Pa11)机械配件规范(60-01-02) Specification for Polyamide11 (Pa11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide11 Pipe and Tubing (60-01-02) ANSI/ASTM F2159-2005 SDR9交联聚乙烯(PEX)管道用带铜夹紧环固的嵌入式塑料配件规范 Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-Linked Polyethylene (PEX) Tubing ANSI/ASTM F2164-2002 采用液压法进行聚乙烯压力管道系统场漏试验的惯例 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure ANSI/ASTM F2176-2002 聚乙烯管道及内管道用机械连接件规范 Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct ANSI/ASTM F2207-2002 住宅金属输气管道衬里系统现场修复规范 Specification for Cured-in-place Pipe Lining System for Rehabilitation of Metallic Gas Pipes ANSI/ASTM F2389-2005 额定压力聚丙烯管道系统标准规范 Specification for Pressure-rated Polypropylene Pp Piping Systems ANSI/ASTM F2402-2004 与医疗气体管道系统终端装置相连的流量测量装置.采用ISO 15002作为美国国家标准(有所偏差) Flow-metering Devices for Connection to Terminal Units of Medical Gas Pipeline Systems, Adoption of ISO 15002 as an American National Standard (with Deviations) ANSI/ASTM F2509-2006 外径可控的聚乙烯配气管和管道上用的现场组合Anoddeless Riser成套器具的规范 Specification for Field-assembled Anoddeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing ANSI/ASTM F409-2002 可拆卸更换的热塑性塑料管及管道配件的规范 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings ANSI/ASTM F628-2006 带泡沫填充料的(ABS)40号塑料排污和通风管道规范 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe with a Cellular Core ANSI/ASTM F645-2004 热塑性水压管道系统的选定、设计和安装指南 Guide for Selection, Design, and Installation of Thermoplastic Water Pressure Piping Systems ANSI/ASTM F683-2004 管道和机械隔热的选定和应用实施规程 Practice for Selection and Application of Thermal Insulation for Piping and Machinery ANSI/ASTM F689-1997 测定内壁金属铸件塑料气压管道地面温度惯例 Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe within Metallic Casings ANSI/ASTM F690-1996 热塑压力管道灌溉系统地下安装惯例 Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems ANSI/ASTM F704-1997 管道系统法兰接头用螺栓长度的选用惯例 Practice for Selecting Bolting Lengths for Piping System Flanged Joints ANSI/ASTM F708-1997 硬质管道支架的设计与安装惯例 Practice for Design and Installation of Rigid Pipe Hangers ANSI/ASTM F721-1981 标准管道组装件的规范 Specification for Gage Piping Assemblies ANSI/ASTM F722-1982 船上管道系统用焊接接头规范 Specification for Welded Joints for Shipboard Piping Systems ANSI/ASTM F725-1989 热塑性管道和配件标准中冲击试验要求起草规程 Practice for Drafting Impact Test Requirements in Thermoplastic Pipe and Fittings Standards ANSI/ASTM F758-1995 高速公路、机场和类似场所排水系统用光滑壁聚氯乙烯(PVC) 塑料管道系统规范 Specification for Smooth-Wall Poly (Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage ANSI/ASTM F771-2005 聚乙烯(PE)热塑性高压灌溉管道系统规范 Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems ANSI/ASTM F891-2004 具有蜂窝式芯的复合聚氯乙烯(PVC)塑料管道的规范 Specification for Coextruded Poly (Vinyl Chloride) (PVC) Plastic Pipe with a Cellular Core ANSI/ASTM F948-1994 固定流体内压下塑料管道系统和组件失效时间-试验方法 Test Method for Time-to-Failure of Plastic Piping Systems and Components under Constant Internal Pressure with Flow ANSI/AWS B2.1-1-201-1996 主要用于管道的、在焊接条件下、(M-1/P-1/S-1,1或2组)1/8到3/4英寸厚、E6010(垂直向上)及E7018(垂直向上)碳 Standard Welding Procedure Specification (WPS) for Shielded Metel Arc Welded of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Uphill) followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications ANSI/AWS B2.1-1-202-1996 主要用于管道的、在焊接条件下(M-1/P-1/S-1,1或2组)1/8到3/4英寸厚、E6010(垂直向下)及E7018(垂直向上)碳钢 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill) followed by E7018 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications ANSI/AWS B2.1-1-203-1996 主要用于管道的、在焊接条件下(M-1/P-1/S-1,1或2组)1/8到3/4英寸厚、E6010(垂直向上)碳钢的药皮焊条电弧焊 Standard Welding Procedure Specification (WPS) for Shieldied Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 though 3/4 inch Thick, E6010 (Vertical Uphill), As-Welded Condition, Primarily Pipe Applications ANSI/AWS B2.1-1-204-1996 主要用于管道的、在焊接条件下(M-1/P-1/S-1,1或2组)1/8到3/4英寸厚、E6010碳钢的药皮焊条电弧焊的标准焊接 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 3/4 inch Thick, E6010 (Vertical Downhill Root with the Balance Vertical Uphill), As-Welded Condition, Primarily Pipe Applications ANSI/AWS B2.1-1-205-1996 主要用于管道的、在焊接或PWHT条件下(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、E6010(垂直向上)及E7018(垂直 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Uphill), Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications ANSI/AWS B2.1-1-206-1996 主要用于管道的、在焊接或PWHT条件下(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、E6010(垂直向下)及E7018(垂直 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E6010 (Vertical Downhill), Followed by E7018 (Vertical Uphill), As-Welded or PWHT Condition, Primarily Pipe Applications. ANSI/AWS B2.1-1-207-1996 主要用于管道的、在焊接或PWHT条件下(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、ER70S-2碳钢的钨极电弧焊的标 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, ER70S-2, As Welded or PWHT Condition, Primarily Pipe Applications ANSI/AWS B2.1-1-208-1996 主要用于管道的在焊接或PWHT条件下(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、E7018碳钢的药皮焊条电弧焊的标 Standard Welding Procedure Specification (WPS) for Shielded Metal Arc Welding of Carbon Steel (M-1/P -1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, E7018, As-Welded or PWHT Condition, Primarily Pipe Applications ANSI/AWS B2.1-1-209-1996 主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、ER70S-2及E7018碳钢的药皮焊 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1 /8 through 1-1/2 inch Thick, ER70S-2 and E7018, As-Welded or PWHT Condition, Primarily Pipe Applications ANSI/AWS B2.1-1-210-2001 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、INMS Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1-1/2 inch Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications ANSI/AWS B2.1-1-211-2001 标准焊接程序规范(WPS).主要用于管道的、在焊接或PWHT条件下、(M-1/P-1/S-1,1或2组)1/8到1-1/2英寸厚、IN