VS_Connection_Map_Icons.doc

此文档收集于网络，如有侵权，请联系网站删除Value Stream and Connection Mapping IconsMFG PROCESSIconRepresentsNotes1Manufacturing Process Label all processes. Also used for departments such as Production Control. Each box represents a flow.XYZ CORP2Outside SourcesUse to show customers, suppliers and outside manufacturing processes.# SHIFTSDATA BOXC/TC/O% SCRAP% UPTIME# PEOPLE3Data BoxUse to record relevant information concerning a manufacturing process, department, etc. Attach to the bottom of a Manufacturing Process or Outside Source box.4OperatorI300 pcs.1 day5InventoryNote count and time.6MarketplaceFollowing processes go to proceeding processes and withdrawal what they need when they need it. Controls production between flows and upstream production without scheduling.7Buffer or Safety StockNote Buffer or Safety Stock. Note count and time.Mon & Wed8Truck ShipmentNote frequency of shipments. Represent other models of transportation in a similar fashion.92 hrsFork Truck MovementNote frequency of movement.1030 minTugger MovementNote frequency of movement.116 wksBoat Movement/ShipmentNote frequency of movement.12Airplane Movement/ShipmentNote frequency of movement.13Movement of production material by PUSHIdentifies material movements that are pushed by the producer, not pulled by the customer (following process).14Movement of finished goods to the customerAlso shows movement of raw material and components from suppliers if they are not pushed.15Physical Pull Pull of material from a supermarket.16Manual Storage/RetrievalShows manual movement of material. Note frequency of movement.17FIFO DeviceIndicates FIFO continuous flow. Note maximum quantity.18Sequenced FlowIndicates FIFO and sequenced continuous flow. Note maximum quantity.19Manual Information FlowFor example: production schedule shipping schedule20Electronic Information FlowFor example: EDI faxWeekly Schedule21ScheduleDescribes an information flow.22Manifest or Sequential ScheduleDescribes a scheduling process that provides the sequence and time interval for production.OXOXO23Load LevelingTool to level the volume and mix of Kanban over a specific period.ACB24Load Leveling BoxTool to level the volume and mix of production Kanbans over a specified period of time. ACB25Kanban BoardPlace near production process where production Kanbans accumulate; e.g., Red-Green-Yellow Pull Board.26Kanban PostPlace where Kanbans are collected and held for conveyance.27Production KanbanTells a process how many of what can be produced and gives permission to do so. Dotted line indicates Kanban flow.28Lot Forming Production KanbanTells a process how many of what can be produced and gives permission to do so once required number of production Kanban signals are received. Dotted line indicates Kanban flow.29Withdrawal KanbanTells how many of what can be withdrawn and gives permission to do so. Dotted line indicates Kanban flow.30Signal KanbanProduction instruction that orders production from a batch process, e.g.: stamping.31A BC DPattern WheelProduction instruction that provides a pattern of production.32Go-See SchedulingScheduling based on someone looking and counting invento