CD4013中文资料(真值表,引脚图,电气参数等).doc

CD4013中文资料(真值表,引脚图,电气参数等)CD4013功能:CD4013是一双D触发器,由两个相同的、相互独立的数据型触发器构成。每个触发器有独立的数据、置位、复位、时钟输入和Q及Q输出，此器件可用作移位寄存器，且通过将Q输出连接到数据输入，可用作计算器和触发器。在时钟上升沿触发时，加在D输入端的逻辑电平传送到Q输出端。置位和复位与时钟无关，而分别由置位或复位线上的高电平完成。CD4013 Truth Table 真值表功能:CL (Note 1) D R S Q Q 0000110010x00QQxx1001xx0110xx1111CD4013引脚图:图CD4013引脚图CD4013内部结构图:图CD4013内部电路图图3 CD4013逻辑图CD4013电气参数:Absolute Maximum Ratings 绝对最大额定值:DC Supply Voltage 直流供电电压 (VDD)-0.5 VDC to +18 VDCInput Voltage输入电压 (VIN)-0.5 VDC to VDD +0.5 VDCStorage Temperature Range储存温度范围 (TS)-65 to +150Power Dissipation功耗 (PD)Dual-In-Line 普通双列封装700 mWSmall Outline 小外形封装500 mWLead Temperature (TL)(Soldering,10seconds) 焊接温度260Recommended Operating Conditions 建议操作条件:DC Supply Voltage 直流供电电压 (VDD)+3 VDC to +15 VDCInput Voltage输入电压 (VIN)0 VDC to VDD VDCOperating Temperature Range工作温度范围 (TA)-40 to +85DC Electrical Characteristics 直流电气特性:Symbol 符号 Parameter 参数 Conditions 条件 -40+25+85Units 单位 最小 最大 最小 典型最大最小最大IDDQuiescent DeviceCurrent 静态电流VDD=5V,VIN=VDD or VSS4.04.030AVDD=10V,VIN=VDD or VSS8.08.060VDD=15V,VIN=VDD or VSS16.016.0120VOLLOW Level Output Voltage 低电平输出电压|IO| 1.0 A VDD = 5V0.050.050.05VVDD = 10V0.050.050.05VDD = 15V0.050.050.05VOHHIGH Level Output Voltage 输出高电平电压|IO| 1.0 A VDD = 5V4.954.954.95VVDD = 10V9.959.959.95VDD = 15V14.9514.9514.95VILLOW Level Input Voltage 输入低电平电压|IO| 1.0 A VDD=5V,VO=0.5V or 4.5V1.51.51.5VVDD=10V,VO=1.0V or 9.0V3.03.03.0VDD=15V,VO=1.5Vor13.5V4.04.04.0VIHHIGH Level Input Voltage 输入高电平电压|IO| 1.0 A VDD=5V,VO=0.5V or 4.5V3.53.53.5VVDD=10V,VO=1.0Vor9.0V7.07.07.0VDD=15V,VO=1.5V or 13.5V11.011.011.0IOLLOW Level Output Current 输出低电平电流 (Note 4)VDD = 5V, VO = 0.4V0.520.440.880.36mAVDD = 10V, VO = 0.5V1.31.12.250.9VDD = 15V, VO = 1.5V3.63.08.82.4IOHHIGH Level Output Current 输出高电平电流 (Note 4)VDD = 5V, VO = 4.6V-0.52-0.44-0.88-0.36mAVDD = 10V, VO = 9.5V-1.3-1.1-2.25-0.9VDD = 15V, VO = 13.5V-3.6-3.0-8.8-2.4IINInput Current 输入电流VDD = 15V, VIN = 0V VDD = 15V, VIN = 15V-0.3 0.3-10-5 10-5-0.3 0.3-1.0 1.0AAC Electrical Characteristics 交流电气特性:Symbol 符号 Parameter 参数 Conditions 条件 最小 典型 最大 Units 单位 CLOCK OPERATION 运行时钟 tPHL, tPLHPropagation Delay Time传递延迟时间VDD = 5V200350nsVDD = 10V80160VDD = 15V65120tTHL, tTLHTransition Time过渡时间VDD = 5V100200nsVDD = 10V50100VDD = 15V4080tWL, tWHMinimum Clock Pulse Width最小时钟脉冲宽度VDD = 5V100200nsVDD = 10V4080VDD = 15V3265tRCL, tFCLMaximum Clock Rise and Fall Time最大时钟上升和下降时间VDD = 5V15msVDD = 10V10VDD = 15V5tSUMinimum Set-Up Time 最低设置时间VDD = 5V2040nsVDD = 10V1530VDD = 15V1225fCLMaximum Clock Frequency 最大时钟频率VDD = 5V2.55MHzVDD = 10V6.212.5VDD = 15V7.615.5SET AND RESET OPERATION SET和复位操作 tPHL(R),tPLH(S)Propagation Delay Time传递延迟时间VDD = 5V150300nsVDD = 10V45130VDD = 15V6590tWH(R), tWH(S)Minimum Set and Reset Pulse Width最低限度和复位脉冲宽度VDD = 5V90180nsVDD = 10V4080VDD = 15V2550CINAverage Input Capacitance 平均输入电容Any Input57.5pF 图4 切