IAR常见编译错误.doc

【转】IAR常见编译错误比较全IAR常见编译错误，比较全面的：前面的序号表示错误编号0 Format chosen cannot support bankingFormat unable to support banking.1 Corrupt file. Unexpected end of file in module module (file) encounteredXLINK aborts immediately. Recompile or reassemble, or check the compatibility between XLINK and C compiler.2 Too many errors encountered (100)XLINK aborts immediately.3 Corrupt file. Checksum failed in module module (file). Linker checksum is linkcheck, module checksum is modcheckXLINK aborts immediately. Recompile or reassemble.4 Corrupt file. Zero length identifier encountered in module module(file)XLINK aborts immediately. Recompile or reassemble.5 Address type for CPU incorrect. Error encountered in module module (file)XLINK aborts immediately. Check that you are using the right files and libraries.6 Program module module redeclared in file file. Ignoring second moduleXLINK will not produce code unless the Always generate output (-B) option(forced dump) is used.7 Corrupt file. Unexpected UBROF format end of file encountered in module module (file)XLINK aborts immediately. Recompile or reassemble.8 Corrupt file. Unknown or misplaced tag encountered in module module (file). Tag tagXLINK aborts immediately. Recompile or reassemble.9 Corrupt file. Module module start unexpected in file fileXLINK aborts immediately. Recompile or reassemble.10 Corrupt file. Segment no. segno declared twice in module module (file)XLINK aborts immediately. Recompile or reassemble.11 Corrupt file. External no. ext no declared twice in module module (file)XLINK aborts immediately. Recompile or reassemble.12 Unable to open file fileXLINK aborts immediately. If you are using the command line, check the environment variable XLINK_DFLTDIR.13 Corrupt file. Error tag encountered in module module (file)A UBROF error tag was encountered. XLINK aborts immediately. Recompile or reassemble.14 Corrupt file. Local local defined twice in module module (file)XLINK aborts immediately. Recompile or reassemble.15 This is no error message with this number.16 Segment segment is too long for segment definitionThe segment defined does not fit into the memory area reserved for it. XLINK aborts immediately.17 Segment segment is defined twice in segment definition -ZsegdefXLINK aborts immediately.18 Range error, compiler/assembler_messageSome instructions do not work unless a certain condition holds after linking. XLINK has verified that the conditions do not hold when the files are linked. For information about how to interpret the error message, see Range errors, page 12.The check can be suppressed b