Waste Management Safe work instruction 安全工作指导 非洲矿业有限公司AML HSE安全管理制度 英文版

AFRICAN MINERALS LTD SWI 0450 Page 1 of 3 024 April 10First Issue Rev DateDescription of RevisionCheckedApproved SAFE WORK INSTRUCTION WASTE MANAGEMENT Document Custodian Manager HSE Document Checked Document Approved TABLE OF CONTENTS 1 DISTRIBUTION2 2 SCOPE2 3 REFERENCE2 4 DEFINITIONS2 5 PROCEDURE2 5 1Waste Identification2 5 2Waste Reduction and Monitoring2 6 TABLE 1 WASTE MANAGEMENT TABLE3 7 APPENDICES FORMS3 SWI F0450AWaste Disposal Record SWI F0450BWaste Monitoring Checklist SAFE WORK INSTRUCTIONSWI 0450 WASTE MANAGEMENTRevision 2 Page 2 AFRICAN MINERALS LTD 1 DISTRIBUTION There are no restrictions on the distribution of this procedure within the Company 2 SCOPE This procedure details the practices used to ensure that waste generated as a result of construction and demolition activities is minimised recycled reused or recovered 3 REFERENCE Nil 4 DEFINITIONS Nil 5 PROCEDURE 5 1Waste Identification The Construction Manager in conjunction with the Project HSE Coordinator PHSEC shall identify the wastes likely to be generated by the project during construction For each identified waste the PHSEC and Construction Manager shall determine the necessary control measures required Where the waste is to be recycled the PHSEC shall contact the respective recycling organisation or the Environmental Officer to arrange for storage containers to be situated on site for waste collection the removal of waste from site at nominated frequencies Typical types of waste control measures and frequency of monitoring are detailed in the waste management practices detailed in Table 1 All site works are to be undertaken in a manner that endeavours to minimise the amount of waste generated and maximise the opportunity to recycle or reuse waste products The Construction Manager shall ensure that all site subcontractors are fully informed of their responsibilities and requirements with respect to minimising and managing waste on site 5 2Waste Reduction and Monitoring The PHSEC shall implement the agreed waste management control measures as stipulated in Table 1 The PHSEC shall develop the required documentation to facilitate implementation of these control measures They shall be in the form of ITPs or Checklists The waste management documents shall be reviewed and authorised by the Construction Manager The PHSEC shall monitor waste collection and disposal practices in accordance with the ITPs Checklists and maintain records that provide evidence of compliance SAFE WORK INSTRUCTIONSWI 0450 WASTE MANAGEMENTRevision 2 Page 3 AFRICAN MINERALS LTD 6 TABLE 1 WASTE MANAGEMENT TABLE Construction WasteManagement measures Monitoring Frequency Evidence of Control Concrete materials culverts concrete pipes kerbs etc Provide clearly marked bins or identified locations for collection by recycling organisation WeeklyRecords of removal Checklists Paving materials bitumen crushed rock etc Provide identified locations for collection by recycling organisation WeeklyRecords of removal Checklists Membrane geotextileProvide bins for safe disposalWeeklyChecklists Timber wood plasterboard form materials packaging timber etc Provide clearly marked bins for reuse or collection by recycling organisation WeeklyRecords of removal Checklists Steel guard rails rails fasteners valves plates offcuts etc Provide clearly marked bins or identified locations for collection by recycling organisation WeeklyRecords of removal Checklists Electrical cables terminations switchgear etc Electrical cable to be placed in bins for collection by recycling organisation Terminations and switchgear to be placed in bins used for steel MonthlyRecords of removal Checklists GlassProvide clearly marked bins for reuse or collection by recycling organisation MonthlyChecklists Plastic fibreProvide segregated bins for safe disposal MonthlyChecklists Paper products Bundled and placed in locations for collection by recycle organisation Reuse