Document CheckX User Guide

CheckXxxx User GuideCheckX User GuideVersion: 1.0.1DocCode: Date: 2013-02-01Important NoticeCopyright NoticeCopyright 2013, Spreadtrum Communications, Inc. All rights reserved.TrademarksSpreadtrum Communications, Inc. and Spreadtrum Communications, Inc.s products are exclusively owned by Spreadtrum Communications, Inc. References to other companies and their products use trademarks owned by the respective companies and are for reference purpose only.Warranty DisclaimerSpreadtrum Communications, Inc. makes no representations or warranties, either expressed or implied, by or with respect to anything in this document, and shall not be liable for any implied warranties of merchantability or fitness for a particular purpose or for any indirect, special or consequential damages.ConfidentialityThe information contained herein (including any attachments) is confidential. The recipient hereby acknowledges the confidentiality of this document, and except for specific purposes, this document shall not be disclosed to any third party.About This DocumentPurposeThis document describes how to use CheckX to check some items from the phone.Intended AudienceThis document is intended for: l Installation and commissioning engineerl Technical support engineer OrganizationThis document consists of five chapters as follows.ChapterDescribesOverviewIntroduce function, runtime environment, and so on.Quick StartIntroduce basic operation of the tool.Operation GuideIntroduce detail operation of the tool.ConfigurationIntroduce some useful settings of the tool.FQASome useful answer and question.ConventionsSymbol ConventionsThe symbols that may be found in this document are defined as follows.SymbolDescriptionIndicates a hazard with a high level of risk that, if not avoided, will result in death or serious injury.Indicates a hazard with a medium or low level of risk which, if not avoided, could result in minor or moderate injury.Indicates a potentially hazardous situation that, if not avoided, could cause equipment damage, data loss, and performance degradation, or unexpected results.Indicates a tip that may help you solve a problem or save time.Provides additional information to emphasize or supplement important points of the main text.Frequently Used AbbreviationsAbbreviationDescriptionGUI ConventionsConventionDescriptionBoldfaceButtons, menus, parameters, tabs, windows, and dialog titles are in boldface. For example, click OK.Multi-level menus are in boldface and separated by the signs. For example, choose File Create Folder.Keyboard OperationFormatDescriptionKeyPress the key. For example, press Enter and press Tab.Key 1+Key 2Press the keys concurrently. For example, pressing Ctrl+Alt+A means the three keys should be pressed concurrently.Key 1, Key 2Press the keys in turn. For example, pressing Alt, A means the two keys should be pressed in turn.Mouse OperationActionDescriptionClickSelect and release the primary mouse button without moving the pointer.Double-clickPress the primary mouse button twice continuously and quickly without moving the pointer.DragPress and hold the primary mouse button and move the pointer to a certain position.ReferenceContents1 Overview2-11.1 Introduction2-21.2 Runtime environment2-21.2.1 HardWare2-21.2.2 SoftWare2-22 Quick Start2-12.1 Main User Interface2-22.2 Quick Operation2-32.2.1 Step by Step2-33 Operation Guide3-13.1 Main User Interface3-23.2 Mode Select3-33.3 Set3-44 Configuration4-14.1 WriteX.ini4-25 FQA5-3Issue 01 (2013-02-01)Spreadtrum Communications Inc.5-3FiguresFigure 2-1 XXX function modules2-3Figure 2-2 Xxxxx2-3Figure 3-1 XXX function modules3-3Figure 3-2 Xxxxx3-3TablesTable 2-1 Description of the XXX function modules2-3Table 3-1 Description of the XXX function modules3-3xxx User Guide5 FQA1 Overview1.1 IntroductionCheckX is a tool that customer can use it to read something from the phone and check it corrected or not. Example, IMEI, BT Address, WIFI Address, Calibration flag, Current voltage, SW Version, AP Version, SIM card status, T Card status, MMICIT, Phase Check and so on will be checked in this tool.CheckX also can check SoftWare Version and AP Version of the phone.CheckX supports two modes to connect with phone, “Calibration Mode” and “Normal Mode”.1.2 Runtime environment1.2.1 HardWaren Prepare a phone that needs to test.n Prepare a USB cable with V-BUS is disconnected (If you want to use “Calibration Mode”).n Prepare a normal USB cable (If you want to use “Normal Mode”).1.2.2 SoftWaren Microsoft Windows 2000 or XP, Vista, Win7 or advanced operation system.2 Quick Start2.1 Main User InterfaceFigure 21 Main user interfaceThe major elements on the interface are described as follows:l 1. Toolbar. For operation.l 2. Inputting area. For inputting IMEI1/IMEI2/IMEI3.l 3. Test result.l 4. Detail for display test result.l 5. IDLE status.l 6. Connect information.l 7. Statistics for test.l 8. Operation area.2.2 Quick Operation2.2.1 Step by StepStep 1 Click “CheckX.exe” to open the tool.Click on the toolbar to select connected mode. If you select USB, it means to use “Calibration Mode”, if you select COMX, it means to use “Normal Mode”.If need to supply remote power, please check Remote Power Supply.Figure 22 Mode Selection dialogStep 2 Click on the toolbar to open setting dialog for some basic configuration.If you want to know more settings, please reference to 3.3 Set.Figure 23 Set dialogStep 3 If you select COMX, you must first power on the phone and connected it with PC, and then click Start button to begin test.If you select USB, you must first click Start button, and then power on the phone.Step 4 Test result.PASS:Figure 24 Test result: PASSFAIL:Figure 25 Test result: FAILTIME OUT:Figure 26 Test result: time out-End3 Operation Guide3.1 Main User Interfacel 1. Toolbar. : Setting icon. Some useful configuration can be set in this, please reference to 3.3 Set.: Mode Selection icon. Calibration Mode or Normal Mode, control power or not can be set here.: Help icon. Look up tools version in here. l 2. Inputting area. For inputting IMEI1/IMEI2/IMEI3. Maybe input by manually or by scanner.l 3. Test result.Item: test items.Expected value: value that user expected.Result: PASS or FAIL.Test Detail: Detail information read from phone.l 4. Detail for display test result.l 5. IDLE status. Maybe as follow: waiting for start test.: enter mode successful, waiting for reading from the phone.: All items pass.: Not all items pass.l 6. Connect information. USB Communication or UART Communication.l 7. Test Statistics. Pass: pass count; Fail: fail count; Pass Ratio: pass ratio. l 8. Operation area. Clear: clear “Test Statistics”. Start : begin to test.3.2 Mode Selectl 1. Mode Selection. If you want to use “Calibration Mode”, Please select USB in Port. If you want to use “Normal Mode”, please select COMX in Port.In “Normal Mode”, the phone must be connected first, and then powered on, and to click Start button at the last.In “Calibration Mode”, must to click Write button at fist, and then powered on the phone. The V-BUS pin of the USB cable must be disconnected.l 2. Power control. If you want to control remote power, please check Remote Power Supply.DCS TYPE: There are four selections:Keithley 230X;Keithley 2304;Agilent 663XX;Agilent E36XX;GPIB TYPE: Maybe NI GPIB (IE488.2) or VISA GPIB.GPIB CARD: Range 0-3.GPIB ADDR: Range 0-30.VOLTAGE (V): Set by user.3.3 Set Figure 31 Setting Dialogl 1. Items Setting. IMEI1: If you want to check IMEI1, select this item.IMEI2: If you want to check IMEI2, select this item.IMEI3: If you want to check IMEI3, select this item.BT Addr: If you want to check Bluetooth address, select this item.WIFI Addr: If you want to check WIFI address, select this item.Check SIM Card Status: If you want to check SIM card, select this item.Check T Card Status: If you want to check T card, select this item.Check MMI CIT Test Result: If you want to check MMI CIT, select this item.Check Current Voltage: If you want to check current voltage, select this item. The voltage must be between Lo Lin and Hi Lin.2. Check Software Version: If checked it and inputted the key words in