如何破解EXCEL工作表保护密码忘记密码怎么办

如何破解EXCEL工作表保护密码忘记密码怎么办1. 新建一个EXCEL工作表，而后点击另存为，讲表格保存为启用宏的工作表2. 一次点击开发工具-录制新宏，在弹出的对话框内修改宏名称而后确定3. 依次点击开发工具-停止录制宏，宏录制完成4. 依次点击开发工具，-宏-在弹出的对话框找到我们刚才录制的宏名称而后进入VBA界面5. 在VBA界面，全选里面的代码，而后删除，讲里面的代码全部删除完6. 代码复制到VBA编辑窗口内Public Sub AllInternalPasswords() Breaks worksheet and workbook structure passwords. Bob McCormick probably originator of base code algorithm modified for coverage of workbook structure / windows passwords and for multiple passwords Norman Harker and JE McGimpsey 27-Dec-2002 (Version 1.1) Modified 2003-Apr-04 by JEM: All msgs to constants, and eliminate one Exit Sub (Version 1.1.1) Reveals hashed passwords NOT original passwordsConst DBLSPACE As String = vbNewLine & vbNewLineConst AUTHORS As String = DBLSPACE & vbNewLine & _Adapted from Bob McCormick base code by & _Norman Harker and JE McGimpseyConst HEADER As String = AllInternalPasswords User MessageConst VERSION As String = DBLSPACE & Version 1.1.1 2003-Apr-04Const REPBACK As String = DBLSPACE & Please report failure & _to the gramming newsgroup.Const ALLCLEAR As String = DBLSPACE & The workbook should & _now be free of all password protection, so make sure you: & _DBLSPACE & SAVE IT NOW! & DBLSPACE & and also & _DBLSPACE & BACKUP!, BACKUP!, BACKUP! & _DBLSPACE & Also, remember that the password was & _put there for a reason. Dont stuff up crucial formulas & _or data. & DBLSPACE & Access and use of some data & _may be an offense. If in doubt, dont.Const MSGNOPWORDS1 As String = There were no passwords on & _sheets, or workbook structure or windows. & AUTHORS & VERSIONConst MSGNOPWORDS2 As String = There was no protection to & _workbook structure or windows. & DBLSPACE & _Proceeding to unprotect sheets. & AUTHORS & VERSIONConst MSGTAKETIME As String = After pressing OK button this & _will take some time. & DBLSPACE & Amount of time & _depends on how many different passwords, the & _passwords, and your computers specification. & DBLSPACE & _Just be patient! Make me a coffee! & AUTHORS & VERSIONConst MSGPWORDFOUND1 As String = You had a Worksheet & _Structure or Windows Password set. & DBLSPACE & _The password found was: & DBLSPACE & $ & DBLSPACE & _Note it down for potential future use in other workbooks by & _the same person who set this password. & DBLSPACE & _Now to check and clear other passwords. & AUTHORS & VERSIONConst MSGPWORDFOUND2 As String = You had a Worksheet & _password set. & DBLSPACE & The password found was: & _DBLSPACE & $ & DBLSPACE & Note it down for potential & _future use in other workbooks by same person who & _set this password. & DBLSPACE & Now to check and clear & _other passwords. & AUTHORS & VERSIONConst MSGONLYONE As String = Only structure / windows & _protected with the password that was just found. & _ALLCLEAR & AUTHORS & VERSION & REPBACKDim w1 As Worksheet, w2 As WorksheetDim i As Integer, j As Integer, k As Integer, l As IntegerDim m As Integer, n As Integer, i1 As Integer, i2 As IntegerDim i3 As Integer, i4 As Integer, i5 As Integer, i6 As IntegerDim PWord1 As StringDim ShTag As Boolean, WinTag As BooleanApplication.ScreenUpdating = FalseWith ActiveWorkbookWinTag = .ProtectStructure Or .ProtectWindowsEnd WithShTag = FalseFor Each w1 In WorksheetsShTag = ShTag Or w1.ProtectContentsNext w1If Not ShTag And Not WinTag ThenMsgBox MSGNOPWORDS1, vbInformation, HEADERExit SubEnd IfMsgBox MSGTAKETIME, vbInformation, HEADERIf Not WinTag ThenMsgBox MSGNOPWORDS2, vbInformation, HEADERElseOn Error Resume NextDo dummy do loopFor i = 65 To 66: For j = 65 To 66: For k = 65 To 66For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126With ActiveWorkbook.Unprotect Chr(i) & Chr(j) & Chr(k) & _Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & _Chr(i3) & Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)If .ProtectStructure = False And _.ProtectWindows = False ThenPWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)MsgBox Application.Substitute(MSGPWORDFOUND1, _$, PWord1), vbInformation, HEADERExit Do Bypass all for.nextsEnd IfEnd WithNext: Next: Next: Next: Next: NextNext: Next: Next: Next: Next: NextLoop Until TrueOn Error GoTo 0End IfIf WinTag And Not ShTag ThenMsgBox MSGONLYONE, vbInformation, HEADERExit SubEnd IfOn Error Resume NextFor Each w1 In WorksheetsAttempt clearance with PWord1w1.Unprotect PWord1Next w1On Error GoTo 0ShTag = FalseFor Each w1 In WorksheetsChecks for all clear ShTag triggered to 1 if not.ShTag = ShTag Or w1.ProtectContentsNext w1If ShTag ThenFor Each w1 In WorksheetsWith w1If .ProtectContents ThenOn Error Resume NextDo Dummy do loopFor i = 65 To 66: For j = 65 To 66: For k = 65 To 66For l = 65 To 66: For m = 65 To 66: For i1 = 65 To 66For i2 = 65 To 66: For i3 = 65 To 66: For i4 = 65 To 66For i5 = 65 To 66: For i6 = 65 To 66: For n = 32 To 126.Unprotect Chr(i) & Chr(j) & Chr(k) & _Chr(l) & Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)If Not .ProtectContents ThenPWord1 = Chr(i) & Chr(j) & Chr(k) & Chr(l) & _Chr(m) & Chr(i1) & Chr(i2) & Chr(i3) & _Chr(i4) & Chr(i5) & Chr(i6) & Chr(n)MsgBox Application.Substitute(MSGPWORDFOUND2, _$, PWord1), vbInformation, HEADERleverage finding Pword by trying on other sheetsFor Each w2 In Worksheetsw2.Unprotect PWord1Next w2Exit Do Bypass all fo