WOHA33_1037273_121_AT-052210-200-801

Hong Kong Airlines Limited香港航空03110-01Hong Kong Airlines MEDHong Kong Airlines LimitedWO NO/工作指令号SEQ NO/序列号WOHA331037_121_273培训方式1037273通用类/GenericTitleGeneral Visual Inspection of Cockpit (EWIS)Mcd&Rev/厂家工卡&修订日期标题整体目视检查驾驶舱AMM05-22-10-200-801 2012-10-01A/C/飞机号Subtask No/工卡号JC Rev/工卡版本号Workarea/工作区域Skill/工种Man Hour/工时BLNLAT-052210-200-801HR002001机身/AirframeAIRP00:24MP Item/MP号Baseline/依据MP REV/ MP版本号Station/维修站Threshold/首检Interval/重复检HA33-ZL-211-01-1MPDZL-211-01-1,MRBZL-211-01-1Issue 2 Revision 4HKG1460 CA1460 CAAccess Panels/接近盖板Zones/区域Written/编写Approved/批准211JW 211KW 831 212JW 212KW 841211 2122012-12-032012-12-19TOOLS/工具TOOLS NECESSARY/必须工具ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注TOOLS IF NECESSARY/视情工具ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注PARTS AND MATERIAL/航材NOTE:OPERATOR MUST GET AND INSTALL THE PARTS THAT CORRESPOND TO THE RELATIVE WORKORDER NO.注释：请工作者严格按照工作指令号领取预定的航材装机PARTS AND MATERIAL NECESSARY/必须航材ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注PARTS AND MATERIALIF NECESSARY/视情航材ITEM项目P/N件号DESCRIPTION名称EQTP类型QTY数量APP适用性Conditions note互换信息及备注IMPORTANT NOTE:In the event of any discrepancies between the Chinese instruction and the English instruction, the English procedure should prevail.Record Additional Work/Findings(If Applivable) Reference No. Certificate of Release to Service (* Tick as appropriate # Different crews should perform the work on each of the systems)Certifies that the work specified, except as otherwise specified, was carried out in accordance with HKAR-145and in respect to that work, The aircraft / aircraft components are considered ready for Release to Service. HKA Approval No: AI / 135 / 706 * HNAT Approval No.: JMM 076, D3039 * HNAT Approval No.: JMM 047, D101115* HNAT Approval No.: JMM 049, D500023 * CASL Approval No: AI / 101 / 798 * TAECO Approval No.: DAI / 89 / 1295 * HAECO Approval No: DAI / 1 / 853 * SIAEC Approval No: AWI / 01 * STARCO Approval No.: JMM 039, D.200078 * SMECO Approval No: JMM 081, D.400009 * AMECO Approval No.: JMM001,D101131* Other: * Signature:_ Authorization No.:_ Date:_AT-052210-200-801 HR002001 W/O:1037 AC:BLNL页码，2 / 5工卡Job card:HA33-ZL-211-01-1TITLEGeneral Visual Inspection of Cockpit (EWIS)PerfInsp标题整体目视检查驾驶舱工作者检查者*接近/Access切片开始*General Visual Inspection of Cockpit (EWIS)整体目视检查驾驶舱1. Job Set-up M 开始工作A. Get Access 接近，如图(Ref. Fig. 601/TASK 05-22-10-991-001 SHEET 601.1)(1) Put an ACCESS PLATFORM 5M (16 FT)- ADJUSTABLE in position at the access door 831 or 841. 放置工作梯到位（区域831或者841）。(2) Open the passenger/crew door 打开旅客/机组登机门(Ref. AMM TASK 52-10-00-010-801) .(3) Remove the sidewall panels 拆下侧壁面板(Ref. AMM TASK 25-13-44-000-802) :For the left side: 对于左边：211JW 211KW . For the right side: 对于右边：212JW 212KW . *检查/Inspect切片开始*2. Procedure T 步骤 A. Do a general visual inspection of the cockpit. 整体目视检查驾驶舱Make sure that: - there is no damage, corrosion, leaks or cracks on all the parts of the components and the structure you can see. - all the installations (wiring) are attached correctly. 确认以下：- 检查区域内所见部件和结构上所有零件无损坏（包括腐蚀，渗漏，裂纹）。- 确认安装部件（线束等）正确安装到位。*恢复/Restore切片开始*3. Close-up 结束A. Close Access M 关闭接近(1) Make sure that the work area is clean and clear of tools and other items. 确认工作场所干净整洁，无工具等外来物。(2) Install the sidewall panels 安装侧壁面板(Ref. AMM TASK 25-13-44-400-802) :For the left side: 对于左边：211JW 211KW . For the right side: 对于右边：212JW 212KW . (3) Close the passenger/crew door 关闭旅客/机组登机门(Ref. AMM TASK 52-10-00-410-801) .B. Put the Aircraft back to its Initial Configuration M 恢复飞机至初始状态(1) Remove all the fixtures, tools, test and support equipment used during this procedure. 拆除工具设备。AT-052210-200