超负荷超强度劳动识别评估与管理程序

1、 文件编号DOC No.SAP-003版本Version A超负荷超强度劳动识别评估与管理程序Identify and Assess Work Overload and Super-strength Management Procedure生效日期Effective date2013-09-20页次Page5 / 5修 订 历 史版次Version次数Times修订内容Revision Content日期Date负责人People in charge核 准Approved审核Checked制 订Prepared1.0目的Purpose对超负荷、超强度工种进行识别、评估与管理，防止伤害事件发生。

2、Identify and assess the overload and super-strength job, thus preventing harm. 2.0适用范围Scope适用于本公司在生产、搬运、仓储、出货等所有可能出现超负荷超强度工作场合。Apply to work place that may arise overload and super-strength when production, transport, storage and shipment etc. 3.0定义Definition 超负荷超强度工种：高温高湿或其它工作环境较恶劣的工种、纯手工且消耗体力较大的工种

3、、高强度反复操作的工种、重体力搬运工种等。 Type of work of overload and super-strength: high temperature and high humidity or other bad work environment, pure manual and exhausting physical, high strength repeatedly, heavy manual handling, etc.4.0职责Responsibility 4.1行政部：对超负荷、超强度工种进行识别、评估，并采取有效措施进行管理，预防伤害与职业病的发生。 Adminis

4、tration Dep.: Identify and assess the overload and super-strength of work, and take effective measures so as to prevent the occurrence of harm and occupational disease. A 4.2各责任部门：对超负荷超强度工种，依评估制定的措施，进行监督管理。 All responsible departments: Supervising and administrating the overload and super-strength j

5、ob according to the measures after assessment.5.0程序内容Procedure 5.1 超负荷超强度工种的识别：由行政部经理对公司各部门、各场所工作进行调查分析，识别出所有超负荷超强度工种，填写超负荷超强度工种劳动安全健康评估表。 Identification of the overload and super-strength work: the administration manager investigate and analyze the job from various sites, distinguish all overload j

6、obs and fill out the Labor Safety and Health Assessment of Overload and Super-strength Job.5.2超负荷超强度工种的劳动安全评估：对识别出来的超负荷超强度工种进行劳动安全健康评估，将评估结果记录于超负荷超强度工种劳动安全健康评估表。 Identification of labor safety assessment for overload and super strength job: Assess the labor safety and health for the identified overl

7、oad and super strength job, and the results recorded in Labor Safety and Health Assessment of Overload and Super-strength Job . 5.3评估方式：根据各工种的特点，对各岗位的作业内容进行评估以及作业环境进行评估。在超负荷超强度工种劳动安全健康评估表中进行打分，分别将每种指标的得分相加，构成评估总得分，总得分R25分时，该工种判定为超负荷超强度劳动工种。Evaluation method: Assess all job contents and the working e

8、nvironment according to the characteristics of each type of work and score on the Labor Safety and Health Assessment of Overload and Super-strength Job table, the total score comes from each index, when total score R 25 points, this job is determined to be overload and super strength. 5.3.1连续工作时间（是指

9、工作期内无休息，连续工作的最长时间）： A.连续工作时间在1小时（含）内；（0-2分） B.连续工作时间在1-2小时（含）内；（3-5分） C.连续工作时间在2-4小时（含）内；（6-10分） Continuous working time (refers to working period without rest, the longest continuous work):A. Continuous working time within 1 hour (including); (0 to 2 points)B. Continuous working time within 1-2 hou

10、r (including); (3 to 5 points)C. Continuous working time within 2-4 hour (including); (6 to 10 points) 5.3.2体力需求强度： A.体力需求强度小；（0-2分） B.体力需求强度中；（3-5分） C.体力需求强度大；（6-10分） The demand strength of physical power: A. Small (0 to 2 points)B. Moderate (3 to 5 points)C. Heavy ( 6 to10 points) 5.3.3机械重复性： A.机械

11、重复性小或不属于机械重复性工作；（0-2分） B.机械重复性强度中；（3-5分） C.机械重复强度高；（6-10分） Mechanical repeatability: A. Low (0 to 2 points)B. Moderate (3 to 5 points)C. High ( 6 to10 points)5.3.4工作环境危害程度（含机器）： A.工作环境危害程度低；（0-2分） B.工作环境危害程度中；（3-5分） C.工作环境危害程度高；（6-10分）Work environment hazard rating(including machine) A. Low (0 to 2

12、points)B. Moderate (3 to 5 points)C. High ( 6 to10 points) 5.4评估时间：每一年评估一次，由行政部经理负责评估；对于公司新导入的机器或新增加的工艺须一个月内及时进行评估。 Assessment frequency: evaluated by the administration department manager once every year, For the company's new import machine or new process must be evaluated in time in a month.

13、5.5超负荷超强度工种的劳动安全健康保护管理：Labor Safety and Health Assessment of Overload and Super-strength Job Management: 5.5.1依评估结果与各工种特点，采取必要的安全措施，如；缩短劳动时间、实行轮岗休息、改进生产工艺流程、改善工作环境（如增加照明、抽风）、提供劳动保护用品、进行机器安全防护、加强安全培训等Take necessary safety measures according to the evaluation results and the characteristics of each jo

14、b, such as shortening the working time, the rotational rest, perfecting production process, improving the working environment (such as increasing lighting, exhaust ), providing labor protection articles and training for machine safety protection, etc. 5.5.2 各部门管理人员应对本部门超负荷超强度工种加强安全健康管理，防止伤害发生。 The manage