真空浸漆绝缘工艺研究

1、真空压力浸漆绝缘工艺研究Insulation Technology Study about Vacuum Pressure Impregnation1 真空压力浸漆（简称：VPI）绝缘工艺1 Vacuum Pressure Impregnation (VPI) Insulation ProcessVPI-真空压力浸渍工艺是将工件预烘去潮后冷却，置于真空环境中，排除白坯线圈内部的空气和挥发物，依靠真空中漆液重力和线圈毛细管作用，以及利用干燥的压缩空气或惰性气体，对解除真空后的浸渍漆液施加一定压力的作用，使漆液迅速渗透并充满绝缘结构内层。在国内，目前VPI还是一种间隙作业的绝缘工艺。工件的滴干工序

2、在浸漆罐内进行，其干燥工序一般另设容器或烘箱进行，方式有真空干燥、常压静置干燥或旋转干燥。The process of VPI-Vacuum pressure impregnation technology is to cool the workpiece after pre-baking and dehumidify, then put it into vacuum environment and exhaust air and volatiles inside the coil. After that put pressure on the impregnation varnish liq

3、uid by depending on the action between liquid gravity and coil capillary and utilizing dry compressed air or inactive gas, then the varnish liquid will penetrate and be full of inner of insulation. So far, the VPI process is a discontinuous operation at home. The process of drip-dry works in impregn

4、ation cans. And the drying process works in the other heating devices, the methods include vacuum drying, stranding drying at ordinary pressure and rotating drying.VPI-工艺流程：预烘除湿入罐真空排气真空浸漆压力浸渍压力排漆卸压滴漆出罐固化干燥。VPI-process: pre-baking and to dehumidifyworkpiece into the vacuum exhaust tankvacuum exhaustv

5、acuum impregnationpressure impregnationpressure remove paintrelief pressure, dripping paintworkpiece out the tankcuring baking.比较：显然，VPI在漆液渗透方面和浸渍方面，远远优于其它浸漆工艺。在应用方面，VPI更适合大型高压线圈、多层齐绕磁轭线圈和要求较高的大型绕组、以及其它高压线圈。理论上，VPI的应用，真空和压力可以做得相当的高，当然成本也高了。FGH则不然，由于连续作业，以及产量和成本的具体要求，其应用具有一定范围的限制。Make a comparison: O

6、bviously, the varnish liquid penetration and impregnation of VPI is superior to the other technology. In terms of application, VPI better suits the large-scale high voltage coil, multilayer magnetic yoke coil, demanding large-scale coil and other high voltage coil. In theory, vacuum and pressure can

7、 achieve quite high while applying VPI, the cost is high at the same time. On the contrary, FGH is not the case. Because of the continuous operation and the specific requirements of production and cost, which limit the range of application.在应用试验和实际工作中，我们发现，真空环境对于某一温度条件下的一种浸渍漆液，当其真空度低于某一绝对压力的数值时，亦即达到

8、某一对应的“临界”真空时，会导致该浸渍漆液中大量泡沫和液面大量雾气的产生，即发生“沫化”和“雾化”现象。“沫化”造成漆液中大量空穴，会阻碍浸渗。“雾化”致使溶剂或稀释剂大量逸出，会影响固化。In the application testing and actual operation, we found that it exists one kind of varnish liquid under one certain degree in vacuum. When the vacuum degree is lower than the absolute pressure value or u

9、p to a certain “critical” vacuum, it will produce a lot of foam and mist in the varnish liquid. This phenomenon is called “foaming” and “nebulization”. “Foaming” will cause a lot of void in varnish liquid and influence the infiltration. “Nebulization” will cause lots of solvent or thinner overflow a

10、nd influence solidification.对于压力，原则上加压是为了使漆液更容易进入填充空隙，输漆过程实际上就有一个大气压。如果绝缘结构内毛细管的润湿性已经平衡，则增加压力对整个绝缘结构的填充并无明显作用，除非在固化时一直维持增加的压力，所以，增加填充的有效途径，是降低漆的粘度和减小绝缘结构空隙、提高毛细管效应，而不是提高压力。根据“粘度与压力对渗透速率”的试验，其数据显示：当漆液粘度较大时，增大压力对填充速度有较大作用，在漆液粘度小时，增大压力对填充速度的作用不显著。然而，漆液粘度却对填充速度具有十分显著的影响，二者呈反比关系。In principle, the pressur

11、e is to make the varnish liquid filling voids easier. Actually, there is one atmospheric pressure in the process of transporting the varnish liquid. Unless to maintain the pressure in the process of curing, or there is no obvious effect to increase pressure on the whole insulation structure if the c

12、apillary in the structure has achieved balance of wettability. Therefore, the effective method to increase the filling is to reduce viscosity of varnish, minish the insulation gap and improve the capillary effect, instead of increasing the pressure. According to test of “viscosity and pressure on th

13、e permeation rate”, the data shows that: Add the pressure has great effect on the speed of filling when the varnish liquid is in larger viscosity. On the other hand, its not obvious of the filling speed while add pressure if the varnish is in low viscosity. However, the viscosity of the varnish has

14、significant impact on the filling speed, there exists inverse relationship between the two aspects.由此可见，在VPI工艺的应用中，片面强调和单纯追求高真空或高压力，是盲目和无益的。其结果会影响浸渍效率，甚至会破坏浸渍质量。一种工艺对不同的绝缘结构以及不同的技术要求，其实际工艺参数也各不相同。譬如VPI共有四种工艺参数，即真空Vi、压力Pi、温度Ti、时间ti，其中i为1、2、3、.，n（n是VP工艺工序的总数，i是工序次序）。绝缘结构（W）、技术指标（A）、漆液特性（E）是这四种工艺参数的基本函

15、数元素。Thus its useless and blind to emphasis and pursuit the high vacuum or high pressure in the application of VPI process. The result will affect the efficiency of impregnation and even destroy the quality. One process has different insulation structure and different demands on technology, and the a

16、ctual process parameters are varied. For example, there are four parameters in VPI process, namely vacuum Vi, pressure Pi, temperature Ti, time ti. And “I” means 1, 2, 3, n (“n” is the total number of VP, and “I” is the order of process). The basic function elements of the four process parameters ar

17、e insulation (W), technical indicators (A) and varnish liquid properties (E).2 电机、变压器绕组的浸漆绝缘处理工艺2 Impregnation insulation process of motor and transformer coil.从沉浸即普通浸渍到多次浸渍，又到滴漆，滚浸和真空浸漆，真空压力浸渍发展到工艺连续的普通沉浸，滴漆和滚浸，最后到真空浸漆烘干一体化，形成了一系列多样的机械化连续作业，应用现代计算机技术和PLC技术自动化控制的浸渍工艺，这是不断地通过技术革新，生产需求和社会发展的推动，逐步演变发展，

18、正是这种推动，又产生了新一代真空浸漆烘干机，节能、环保成一体的高新技术产品、名牌产品，国内外近600家用户使用。It has formed a series of diverse mechanized continuous operation from the ordinary impregnation to multiple impregnation, but also to drip varnish, to roll impregnation, to vacuum impregnation which developed to ordinary continuous impregnatio

19、n, and to integrate vacuum impregnation and drying at last. The application of computer technology and PLC control technology, which is through technical innovation, production needs and social development. Its just this kind of development, which has produced a new vacuum impregnation dryer. The hi

20、gh-tech and brand-name products have the advantage of energy saving and environmental protection. It owns nearly 600 users at home and abroad.新一代真空浸漆烘干机是将工件放入浸烘缸预烘，在真空环境中排除线圈内部的空气和挥发物，再在真空条件下依靠漆液重力和线圈中毛细管作用，真空浸漆，使漆液迅速渗透并充满绝缘结构内层的一种机械作业的绝缘工艺。The new vacuum impregnation dryer is the insulation process

21、 of one mechanical job. The process is to put the workpiece into dryer to pre-bake, then remove the air and volatiles which inside coils in a vacuum environment, and enable varnish penetrate and full of the inner insulation structure through vacuum impregnation which rely on gravity and coil capilla

22、ry.FGH工艺流程：放入工件白坯预烘真空去湿真空浸漆回漆滴漆清洗回清洗剂低温干燥至高温固化保温出炉全过程，全密封无环境污染一次性完成。FGH process: put workpiece into machinepre-bakevacuum desiccantvacuum impregnationback varnishdrip varnishcleaningreturn cleanerlow temp drying or high temp curingthermalout the workpiece. The whole process finished in one time with

23、 full sealed structure and without environmental pollution. FGH作用优点：在FGH工艺适用范围中，其作用的优点主要在以下几个方面: The advantages of application scope in FGH process mainly as follow aspects:（1）提高整体性，由于真空浸漆使绝缘漆几乎完全填充绝缘内部，加强了整个绕组的整体性，绕组在运行中各部分不会单独移动，减少了因移动磨损引起的故障。(1) Integrity improvement. The process of vacuum impreg

24、nation enable varnish almost full of inner insulation and strengthen the integrity of the whole coil. Each part of the coil wont move individually in operation, and then reduce failure by the wear of movement.（2）提高耐环境条件，由于真空浸漆，整个浸漆过程包括输漆和浸漆烘干，都是在完全密封容器条件下进行和完成，整个干燥过程采用热风循环加热，产生的废气通过A、B二组冷凝器回收再排放，改善工

25、作环境，符合环保要求。(2) Improve the resistance to environmental conditions. Due to the whole process of vacuum impregnation includes varnish applying, varnish dipping and drying, which should be finished in sealed condition. Then the entire drying process uses the hot air circulating to heat, the generated e

26、xhaust gas be recycled and discharged by the A/B condensers. This method improves the working environment, which comply with environmental requirements.（3）降低运行温度和温升，由于真空浸漆与干燥成一体完全填充，绝缘漆良好地代替了内部空气隙，提高了导热性能，对电机、变压器一般可降低5-10。(3) Lower operation temp and temp rise. Because of the vacuum impregnation and drying mixed with each other completely, the insulation varnish instead of the internal air g