TF系列箱外自封式吸油过滤器

1、TFTF TANK MOUNTED SUCTION FILTER SERIES 1 2 3INTRODUCTIONThe TF-series filters can be installed on the top, at the side or in the bottom of t-he tank. There is a check valve inside the filter, during maintenance, when filter ele-ment is withdrawn for washing, the check valve will close automatically

2、 to stop oil f-lowing out from the tank.A vacuum indicator in the filter gives signals when the pressure drop across the element reaches 0.018MPa showing that the filter shall be cleaned. If no maintena-nce is done, as the pressure drop rises to 0.02MPa, the by-pass valve will open to a-llow oil flo

3、wing into pump. This kind of filter can be installed at inlet port of the pump, in order to protect the pump and other component. This filter can help to keep hydr-aulic system clean and easy to use. P2P1MODEL CODE (L/min Flow rateTank mounted suction filterWater-glycolOmit if use hydraulic oilMOUNT

4、ING GUIDE(0.02MPa TF-25160 Table 1: TF-25160 Threaded ConnectionTECHNICAL DATA160L/min 80m ZS-I TF BH-16080L - C*TFX BH-16080Note:*is filtration accuracy, If the medium is water-glycol, flow rate is 160L/min, filtration accuracy is 80m,with ZS-I indicator, the model of this filter is TF BH-16080L-C, the model of element is TFX BH-16080. QM18 1.5Note: The outlet flange, seal, screw used for this series will be supplied by our plant; the customer only need welding steel tube Q. Connection of the indicat