压力爆破实验报告

1、测试报告序列号：11BPTX压力爆破试验报告Test Report on Pressure Burst样件名称(Sample Name)委托部门(Client)i注意事项DECLARATION1. 未经研发部书面同意，不得部分地复制本报告。This test report shall not be duplicated without prior written approval of the R&D department.2. 报告无测试人员，审核，批准人签名无效。The report is invalid in case of no signatures of inspector,

2、 reviewer and approver.3. 报告涂改无效。The report is invalid in case of sign of erasure.4. 委托检验结果仅对所检验样品有效。Inspection result only bears responsibility for the received sample in case of commissioned inspection.样品型号Sample model申请单编号Application NO.BPTX产品编号Product NO.委托单位Client设计压力（MPa）Design pressure测试压力（MP

3、a） Test pressure试验依据Test standardUL207板片材料Plate material板片厚度（mm）Plate thickness生产厂家Supplier钎焊材料Brazing material材料厚度（mm）Material thickness生产厂家Supplier高度（mm） Height宽度（mm） Width厚度（mm） Thickness接样日期Reception date完成日期Finish date测试目的Test pr(）posal样品描述Sample可对波型，板型，片距，接管及角孔尺寸，分配器，垫片，加强板等情况进 行描述。Others: Add

4、ing description in structure parameter, performance parameter, drawings, and so on.接管”外螺纹Connection, "external threaddescription测试条件Test co试验装置Test equipment爆破试验台Burst test rig试验用介质水Water试验环境温度(°C)Ambient temperature30试验介质温度(oC)Medium temperature30试验情况记录Test process record主侧(Primary Side)

5、Q1-Q2ndtion1-H2中断压力(Burst Pressure):MPa辅侧(Secondary Side) Q3 -Q4 H3-H4中断压力(Burst Pressure): MPa测结果丁 +Test res主侧泄漏位置Leakage Location in Primary Side内漏 Internal Leakage 外漏 External Leakage匚端板与首片板片之间 Betweenfront cover plate and first plate 底板与木片板片之间Betweenback cover plate and last plate 其他 Others21t辅侧

6、泄漏位置Leakage Location in Secondary Side 内漏 Internal Leakage 外漏 External Leakage 端板与首片板片之间Betweenfront cover plate and first plate 底板与木片板片之间 Between back cover plate and last plate 其他 Others注：Q1、Q2、H1、H2及Q3、Q4、H3、H4分别为同一侧接管Note: Q1、Q2、H1、H2 and Q3、Q4、H3、H4 are respective the same side connection.测试结论及佩 .离 analysis分 析Test c通过 Acceptable未