常用螺栓螺丝图解

1、常用螺栓、螺丝图解 d=+*n)*其中N表示如#4,#6#8#10等，D则等于换算出的公制尺寸 美制牙为55度角，美制都是用牙数表示，公制是用牙距表示，例如:英制1/2-12美制1/2-13公制 MSmachinescrew,HTheattreatment. panheadhexdrive盘头六角槽 1/4-20:螺触直彳空1/4”,1(25.磕啊0彳固牙 马氏体不锈钢SUS410 Self-drillingscrews自钻自攻钉 WaferHeadwithWasherSelf-drillingScrewsZincplated大DrywallSelf-drillingScrewsBlackOx

2、ide 扁头带垫自钻自攻钉 PanHeadSelf-drillingscrewsNickelPleatedandZincPlated盘头 发黑岗山头十字槽自钻自攻钉 镀锌干壁自钻自攻钉 PanFarmingscrewsPoziSelf-drillingScrews 自钻自攻钉镀锌镀馍 HexWasherSelf-DrillingScrews 六角带垫自钻自攻钉 WaferHeadSelf-drillingScrews 威华头自钻钉、根切沉头自钻钉 HexWaherwithZPDMBondedWasherSelf-drillingTapping HexWaherwithZPDMBondedWas

3、herSelf-drillingScrews六角 Self-tappingscrews自攻螺丝 Screws六角带垫套复合垫自钻自攻钉 带垫套复合垫自攻钉 HexwasherwithNeoWasherYellowZincPlated 六角带垫套尼龙垫机螺纹自钻自攻钉黄锌 六角套筒 1111 !广1显V/元rwiMB， CombinationHeadSelf-tappingScrews复合槽十字槽自攻钉 昌 4( A界1 ILx小 乙0r, Slots&Phil&SquarePanSelf-tappingScrews 十字槽一字槽方槽沉头自攻钉 1A Screwswithlacq

4、uerPrinted头部喷漆自攻钉 ChipboardScrews纤维板螺钉 N、二 八 Self-tappingScrewsNickelPlated镀银自攻钉 F* 3茎更好 PanHeadphilSelf-tappingScrews 盘头十字槽自攻钉 TrussHeadPhilSelf-tappingScrewsChormePlated 扁头十字槽自攻钉镀铭 ChipboardScrewsPlatHead ChipboardScrewsPlatHead BronzePlated沉头米字槽纤维板螺钉镀古 YellowPlated沉头米字槽纤维板螺钉黄锌 铜 ChipboardScrewsPa

5、nHeadWhitePlated盘头DoubleHeadChipboardscrews双沉头（双锥） 米字槽纤维板螺钉镀白锌 ChipboardscrewswithRibbs（AUSStandard）沉头带筋纤维板螺钉（澳标） Drywallscrews干壁螺钉 纤维板螺钉 DrywallScrewsCoarseThreadBlackPhosphateDrywallscrewsCoarseThreadYellowPlated粗 黑磷化粗牙干壁钉 Machinescrews机螺车丁 PanHeadphilMachineScrews盘头十字槽机 FlatHeadMachineScrews沉头机螺钉 HexwithWasherAnti-drawMachineScrews六SquareHexSlotsMachineScrews凹穴六角一 牙干壁钉镀黄锌 角带垫带止退机螺钉字槽机螺钉 combinationPanHeadMachineScrews盘头复合槽机钉 Un-standardscrews其它及三曰标螺车丁 DoubleHeadScrewsEyeLagScrews HookScrews双头螺钉羊眼灯钩绞丝钉 HexagonHeadWoodScrews六角头木螺车