经典8D案例分析

1、客户抱怨回复报告Customer Complain Reply Report诉怨日期Complain Date：回复日期Reply Date：经办Prepared By： 客户Customer.：报告编号Report No.：核准Approved By：主题SUBT： Studs of the cabinet bottom broken1、问题描述（Problem Description）：Frontech customer found there was transformer movement inside the UPS, and Umax & Frontech customer

2、 found in some units the Studs of the cabinet bottom were broken, and the transformer clamps are bending. Pictures as below.2、问题处理成员（Team Members）3、原因分析（Root Cause Analysis）：1. The transformer movement issue: Leaders transformer had used small clamps, some clamps may not be fully tight, and the gaps

3、 of the studs were a bit large, so the in some cases the transformer have abit movement, picture as below.2. The Studs of the cabinet bottom were broken: it seems the UPS was dropped from high height , we have done the drop test to check this problem, normally this problem cannot happen.4、

4、临时性措施（Short-Term Corrective Action）：Repair the failed units.5、长期性措施（Long-Term Corrective Action）：For this loose fitting of transformer issue, we have already changed the transformer clamp, it can fix the transformer full tightly, picture as below.And we will increase the thickness of the studs in th

5、e cabinet bottom , so that the gaps will be reduced, it can hold the transformer tightly, and the studs will be more solid , it is not easy to be broken.6、改善效果（Improved Result）：We have done the drop test to check the corrective actions, the studs are all OK.7、预防再发生措施（Preventive Action）：Same as item 5.8、问题结案及