机构名称南京市建筑安装工程质量检测中心

1、机构名称：南京市建筑安装工程质量检测中心注册号：L1646地 址：A：江苏省南京市苜蓿园大街29号B：江苏省南京市南湖路安国村19幢获准认可能力索引序号地址能力范围评审类型更新时间1A授权签字人(中文)复评+扩项2013年01月16日2授权签字人(英文)复评+扩项2013年01月16日3A检测能力(中文)复评+扩项2013年01月16日4检测能力(英文)复评+扩项2013年01月16日5B授权签字人(中文)复评+扩项2013年01月16日6授权签字人(英文)复评+扩项2013年01月16日7B检测能力(中文)复评+扩项2013年01月16日8检测能力(英文)复评+扩项2013年01月16日Na

2、me：Nanjing Quality Inspection Center of Construction and InstallationRegistration No.：L1646 ADDRESS：A: No.29, Muxuyuan Street, Nanjing, Jiangsu, ChinaB：Building 19, Anguo, Nanhu Road, Nanjing, Jiangsu, ChinaINDEX OF ACCREDITED SIGNATORIES No.AddressRangeTypeUpdate date1AApproved signatories (Chinese

3、)Reassessment+Extending assessment2013-01-162Approved signatories (English)Reassessment+Extending assessment2013-01-163ATesting ability(Chinese)Reassessment+Extending assessment2013-01-164Testing ability(English)Reassessment+Extending assessment2013-01-165BApproved signatories (Chinese)Reassessment+

4、Extending assessment2013-01-166Approved signatories (English)Reassessment+Extending assessment2013-01-167BTesting ability(Chinese)Reassessment+Extending assessment2013-01-168Testing ability(English)Reassessment+Extending assessment2013-01-16中国合格评定国家认可委员会认 可 证 书 附 件（注册号：CNAS L1646）名称: 南京市建筑安装工程质量检测中心

5、 地址：江苏省南京市苜蓿园大街29号签发日期：2013年01月16日 有效期至：2016年01月15日更新日期：2013年01月16日附件1 认可的授权签字人及领域序号姓 名授权签字领域备 注1陆建民全部检测项目2吴永军全部检测项目3赵建华全部检测项目4范凯全部检测项目CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENTAPPENDIX OF ACCREDITATION CERTIFICATE(Registration No. CNAS L1646) NAME:Nanjing Quality Inspection Cent

6、er of Construction and Installation ADDRESS:No.29, Muxuyuan Street, Nanjing, Jiangsu, China Date of Issue:2013-01-16 Date of Expiry:2016-01-15 Date of Update：2013-01-16APPENDIX 1 ACCREDITED SIGNATORIES AND SCOPEName Authorized Scope of SignatureNote1Lu JianminAll test objects2Wu yongjunAll test obje

7、cts3Zhao JianhuaAll test objects4Fan KaiAll test objects 中国合格评定国家认可委员会认 可 证 书 附 件（注册号：CNAS L1646）名称: 南京市建筑安装工程质量检测中心 地址：江苏省南京市苜蓿园大街29号认可依据：ISO/IEC 17025:2005以及CNAS特定认可要求签发日期：2013年01月16日 有效期至：2016年01月15日更新日期：2013年01月16日附件2 认可的检测能力范围序号检测对象项目/参数领域代码检测标准（方法）名称及编号（含年号）限制范围说明序号名称1保温节能1含水率1016无机硬质绝热制品试验方法G

8、B/T 5486-20082密度10163表观密度1016泡沫塑料及橡胶 表观密度的测定GB/T 6343-20094镀锌电焊网丝径1016镀锌电焊网QB/T 3897-19995镀锌电焊网网孔大小10166镀锌电焊网焊点抗拉力10161保温节能7镀锌层质量1016钢产品镀锌层质量试验方法GB/T 1839-2008只用：重量法8建筑外窗保温性能0327建筑外门窗保温性能分级及检测方法GB/T 8484-20089导热系数1505绝热材料稳态热阻及有关特性的测定 防护热板法GB/T 10294-20081保温节能10尺寸稳定性1016硬质泡沫塑料 尺寸稳定性试验方法GB/T 8811-2008

9、11尺寸偏差1016泡沫塑料与橡胶 线性尺寸的测定GB/T 6342-199612压缩强度/压缩性能1016硬质泡沫塑料 压缩性能的测定GB/T 8813-200813吸水率1016硬质泡沫塑料吸水率的测定GB/T 8810-200514单位面积质量1016增强制品试验方法 第3部分:单位面积质量的测定GB/T 9914.3-200115断裂强力1016增强材料 机织物试验方法 第5部分:玻璃纤维拉伸断裂强力和断裂伸长的测定GB/T 7689.5-200116现场粘结强度1016外墙外保温工程技术规程JGJ144-20041保温节能17断裂应变/断裂伸长率1016增强材料 机织物试验方法 第5

10、部分：玻璃纤维拉伸断裂强力和断裂伸长的测定GB/T 7689.5-200118单个锚栓抗拉承载力1016膨胀聚苯板薄抹灰外墙外保温系统JG149-20031保温节能19压剪粘结强度1016陶瓷墙地砖胶粘剂JC/T 547-200520保温砂浆抗压强度1016胶粉聚苯颗粒外墙外保温系统 JG158-20042膨胀珍珠岩绝热制品部分参数1016膨胀珍珠岩绝热制品GB/T 10303-2001只测：尺寸、密度、导热系数、抗压强度3绝热用模型聚苯乙烯泡沫塑料部分参数1016绝热用模型聚苯乙烯泡沫塑料GB/T 10801.1-2002只测：表观密度、导热系数、压缩强度、尺寸稳定性、吸水率4绝热用挤塑聚苯

11、乙烯泡沫塑料（XPS）部分参数1016绝热用挤塑聚苯乙烯泡沫塑料（XPS）GB/T 10801.2-2002只测：尺寸、导热系数、热阻、压缩强度、尺寸稳定性、吸水率5膨胀聚苯板薄抹灰外墙外保温系统部分参数1016膨胀聚苯板薄抹灰外墙外保温系统JG149-2003不测：系统吸水量、抗冲击强度、水蒸汽湿流密度、不透水性、耐候性、抗风压值、抹面胶浆柔韧性、可操作时间、单个锚栓对系统传热增加值6胶粉聚苯颗粒外墙外保温系统部分参数1016胶粉聚苯颗粒外墙外保温系统JG158-2004只测：系统抗拉强度、面砖粘结强度、界面砂浆压剪粘结强度、保温浆料密度、导热系数、抗压强度、压剪粘结强度、抗裂砂浆拉伸粘结强

12、度、网格布相关性能、粘结砂浆拉伸粘结强度、压剪粘结强度、单个锚栓拉拔承载力标准值、钢丝网相关性能7建筑物隔热用硬质聚氨酯泡沫塑料部分参数1016硬泡聚氨酯保温防水工程技术规范 GB50404-2007只测：尺寸、密度、压缩性能、导热系数、尺寸稳定性、吸水率8水泥基复合保温砂浆建筑保温系统部分参数1016建筑节能标准 水泥基复合保温砂浆建筑保温系统技术规程DGJ32/J22-2006不测：系统吸水量、抗冲击强度、耐冻融性能、水蒸汽渗透阻、抗风压荷载性能、耐候性、抹面层不透水性、线性收缩率、软化系数、可操作时间、压折比、重量吸水率、线性收缩率、水泥基复合保温砂浆燃烧性能级别、网格布涂塑量、网孔中心

13、距9外墙外保温工程1拉伸粘结强度1016外墙外保温工程技术规程JGJ144-20042耐碱断裂强力10163耐碱断裂强力保留率10164表观密度1016泡沫塑料及橡胶表观密度的测定GB/T 6343-20095抗拉强度1016外墙外保温工程技术规程JGJ144-20046导热系数1505绝热材料稳态热阻及有关特性的测定 防护热板法GB/T 10294-20089外墙外保温工程7系统现场粘结强度1016外墙外保温工程技术规程JGJ144-20048压缩性能1016硬质泡沫塑料 压缩性能的测定GB/T 8813-20089热阻1505绝热 稳态传热性质的测定 标定和防护热箱法GB/T 13475-

14、2008只用：防护热箱法10尺寸稳定性1016硬质泡沫塑料 尺寸稳定性试验方法 GB/T 8811-200810纸面石膏板部分参数1010纸面石膏板GB/T 9775-2008只测：面密度、断裂荷载、吸水率、表面吸水量11防水卷材1拉力1016建筑防水卷材试验方法 第8部分：沥青防水卷材 拉伸性能GB/T 328.8-2007建筑防水卷材试验方法 第9部分：高分子防水卷材 拉伸性能GB/T 328.9-20072拉伸试验1016硫化橡胶或热塑性橡胶 拉伸应力应变性能的测定GB/T 528-20093伸长率10164不透水性1016建筑防水卷材试验方法 第10部分：沥青和高分子防水卷材 不透水性

15、GB/T 328.10 -2007只做：B法11防水卷材5低温柔度、低温弯折性1016建筑防水卷材试验方法 第14部分：沥青防水卷材 低温柔性GB/T 328.14 -2007建筑防水卷材试验方法 第15部分：高分子防水卷材 低温弯折性GB/T 328.15-20076耐热度1016建筑防水卷材试验方法 第11部分：沥青防水卷材 耐热性GB/T 328.11-20077吸水性1016建筑防水卷材试验方法 第27部分：沥青和高分子防水卷材 吸水性GB/T 328.27-200712弹性体改性沥青防水卷材部分参数1016弹性体改性沥青防水卷材GB 18242-2008只测：不透水性、耐热度、拉力、

16、最大拉力时延伸率、低温柔度13塑性体改性沥青防水卷材部分参数1016塑性体改性沥青防水卷材GB 18243-200814沥青复合胎体柔性防水卷材部分参数1016沥青复合胎体柔性防水卷材JC/T 690-2008只测：不透水性、耐热度、拉力、断裂延伸率、柔度15自粘聚合物改性沥青防水卷材部分参数1016自粘聚合物改性沥青防水卷材GB23441-2009只测：不透水性、耐热度、拉力、延伸率、低温柔度16高分子防水片材部分参数1016高分子防水材料 第1部分：片材GB18173.1-2006只测：不透水性、断裂拉伸强度、扯断伸长率/胶断伸长率、低温弯折性17防水涂料1耐热度0215建筑防水涂料试验方

17、法GB/T 16777-20082拉伸性能02153低温柔性02154不透水性02155干燥时间021518聚氨酯防水涂料部分参数0215聚氨酯防水涂料GB/T 19250-2003只测：拉伸强度、断裂伸长率、不透水性、低温弯折性、表干时间、实干时间19聚合物水泥防水涂料部分参数0215聚合物水泥防水涂料GB/T 23445-2009只测：拉伸强度、断裂伸长率、不透水性、低温柔性20建筑涂料1耐水性0215漆膜耐水性测定法GB/T 1733-19932耐碱性0215建筑涂料 涂层耐碱性的测定GB/T 9265-20093耐洗刷性0215建筑涂料 涂层耐洗刷性的测定GB/T 9266-20094

18、涂层耐冻融性0215建筑涂料 涂层耐冻融循环性测定法JG/T 25-199921合成树脂乳液外墙涂料部分参数0215合成树脂乳液外墙涂料GB/T 9755-2001只测：容器中状态、施工性、低温稳定性、涂膜外观、干燥时间、耐水性、耐碱性、耐洗刷性、涂层耐温变性22合成树脂乳液内墙涂料部分参数0215合成树脂乳液内墙涂料GB/T 9756-2009只测：容器中状态、施工性、低温稳定性、涂膜外观、干燥时间、耐碱性、耐洗刷性23弹性建筑涂料部分参数0215弹性建筑涂料JG/T 172-2005不测：耐人工气候老化性24合成树脂乳液砂壁状建筑涂料部分参数0215合成树脂乳液砂壁状建筑涂料JG/T 24

19、-2000只测：容器中状态耐水性、耐碱性 CHINA NATIONAL ACCREDITATION SERVICE FOR CONFORMITY ASSESSMENTAPPENDIX OF ACCREDITATION CERTIFICATE(Registration No. CNAS L1646) NAME:Nanjing Quality Inspection Center of Construction and Installation ADDRESS:No.29, Muxuyuan Street, Nanjing, Jiangsu, China Accreditation Criteria

20、:ISO/IEC 17025:2005 and relevant requirements of CNASDate of Issue:2013-01-16 Date of Expiry:2016-01-15 Date of Update：2013-01-16APPENDIX 2 ACCREDITED TESTINGTest ObjectItem/ParameterCode of Field Title, Code of Standard or Method Limitation NoteItem/ Parameter1Heat preservation and energy economiz-

21、ation1Water containing ratio1016Test methods of inorganic rigid thermal insulation GB/T5486-20082Density10163Apparent density1016Cellular plastics and rubbers - Determination of apparent density GB/T6343-20094Silk footpath of Welded wire fabric coated with zinc1016Welded wire fabric coated with zinc

22、 QB/T3897-19991Heat preservation and energy economiz-ation5Mesh size of Welded wire fabric coated with zinc1016Welded wire fabric coated with zinc QB/T3897-19996Pull of solder point of Welded wire fabric coated with zinc10167Zincification layer quality of Welded wire fabric coated with zinc1016Test

23、method for gravimetric determination of the mass per unit area of galvanized coatings on steel products GB/T 1839-2008Accredited only for: weight method8Heat preservation capacity of buildings out-window0327Graduation and test method for thermal insulating properties of doors and windows GB/T8484-20

24、089Heat- conduction coefficient1505Thermal insulation - Determination of steady-state thermal resistance and related properties - Guarded hot plate apparatus GB10294-20081Heat preservation and energy economization10Dimension stability1016Rigid celluar plastics -Test method for dlmenslonal stability

25、GB/T8811-200811Size warp1016Cellular plastics and rubbers-Determination of linear dimensions GB/T6342-199612Compressive strength /compressive property1016Rigid cellular plastics- Determination of compression properties GB/T8813-200813Water absorption rate1016Determination of water absorption of rigi

26、d cellular plastics GB/T8810-200514Unit area quality1016Test method for reinforcement products Part3:Determination of mass per unit area GB/T9914.3-200115Tensile breaking force at break1016Reinforcements - Test method for woven fabrics Part 5: Determination of tensile breaking force and elongation a

27、t break for glass fibre GB/T7689.5-20011Heat preservation and energy economization16Site bonding strength1016Technical specification for external thermal insulation on walls JGJ144-20041Heat preservatio-n and energy economiza-tion17Rupture strain/rupture extend ratio1016Reinforcements - Test method

28、for woven fabrics Part 5: Determination of tensile breaking force and elongation at break for glass fibre GB/T7689.5-200118Bearing capacity of single anchor pull1016External thermal insulation composite systems based on expanded polystyrene JG149-200319Adhesive strength of pression and shear1016Adhe

29、sives for ceramic wall and floor tiles JC/T547-200520Mortar compressive strength of preserving heat1016External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggregate JG158-20042Expanded perlite thermal insulationPart parameters101

30、6Expanded perlite thermal insulation GB/T10303-2001Accredited only for: size, density, heat-conduction coefficient, compreas-sive strength3Moulded polystyrene foam board for thermal insulationPart parameters1016Moulded polystyrene foam board for thermal insulation GB/T10801.1-2002Accredited only for

31、: apparent density, heat-conduction coefficient, compressive strength, dimension stability, water absorption ratio4Rigid extrudedpolystyre-ne foam board for thermal insulation(XPS)Part parameters1016Rigid extruded polystyrene foam board for thermal insulation(XPS) GB/T10801.2-2002Accredited only for

32、: appearance, size, heat-conduction coefficient, heat resistance, compressive strength, dimension stability, water absorption ratio5External thermal insulation composite systems based on expanded polystyrenePart parameters1016External thermal insulation composite systems based on expanded polystyren

33、e JG149-2003Except for: water absorption of system, impact resistance, vapour infiltration coefficient, water impermeability, weatherability, resist to wind, flexiblity of baes coat, operation time, increase value of single mechanical fixings6External thermal insulating rendering systems made of mor

34、tar with mineral and using expanded polystyrene granule as aggregatePart parameters1016External thermal insulating rendering systems made of mortar with mineral binder and using expanded polystyrene granule as aggregate JG1582004Accredited only for:tensile strength of system, adhesive strength of fa

35、cing brick, adhesive strength of pression and shear of interface treating agent, density of insulating material, heat-conduction coefficient, compressive strength, adhesive strength of pression and shear, tensile bond strength of finishing coat motar, correlation properties of fiberglass mesh, tensi

36、le bond strength, adhesive strength of pression and shearof adhesive for tile, bearing capacity of single mechanical fixing, correlation properties of welded wire fabric7Cellular plastics-Specification of polyurethane for rigid materials used in the thermal insulation of buildingPart parameters1016T

37、echnical code for rigid polyurethane foam insulation and waterproof engineering GB50404-2007Accredited only for: density, compressive strength, heat-conduction coefficient, size stability, water absorption rate.8thermal insulating rendering systems made of cement based mortar mixed with expanded pol

38、ystyrene pellets or pear sand aggregatePart parameters1016Technical Specification of thermal insulating rendering systems made of cement based mortar mixed with expanded polystyrene pellets or pear sand as aggregate DGJ32/J22-2006Except for: water absorption of system, impact resistance, vapour infi

39、ltration coefficient, resist to wind load property, weather-ability, linear shrinkage rate,softening coefficient, operation time, ratio of compressive to flexural strength, water absoption rate, burning capability grade of cement based mortar mixed with expanded polystyrene pellets or pear sand aggr

40、egate, mesh casting capacity, center distance of mesh hole9Exterior Insulation works1Tensile bond strength1016Technical specification for external thermal insulation on walls JGJ144-20042Alkaline breaking strength10163Alkaline breaking strength retention rate10164Apparent density1016Cellular plastic

41、s and rubbers-Determination of apparent density GB/T6343-20095Tensile Strength1016Technical specification for external thermal insulation on walls JGJ144-20046Thermal conductivity coefficient1505Thermal insulation-Determination of steady-state thermal resistance and related properties-Guarded hot pl

42、ate apparatus GB10294-20089Exterior Insulation works7System site bond strength1016Technical specification for external thermal insulation on walls JGJ144-20048Compressive Performance1016Rigid cellular plastics - Determination of compression propertier GB/T8813-20089Hot Resistance1505Thermal insulati

43、on-determination of steady-state thermal transmission properties - Calibrated and guard hot box GB/T 13475-2008Accredited only for: guard hot box methed10Dimensional Stability1016Rigid cellular plastics - Test method for dimensional stability GB8811-200810Plaster boardPart parameters1010Gypsum plast

44、erboard GB/T9775-2008Accredited only only for: appearance quality, loading at break, water absorption rate, face water absorption11Waterproofwrap material1Pull force1016Test methods for building sheets for waterproofing-Part 8:Bitumen sheets for waterproofing-tensile properties GB/T328.8-2007 Test m

45、ethods for building sheets for waterproofing-Part 9:plastic and rubber sheets for waterproofing-tensile properties GB/T328.9-20072Tensile test1016Rubber,vulcanized or thermoplastic-Determination of tensile stress-strain properties GB/T528-20093Elongation percent10164Water impermeability1016Test meth

46、ods for building sheets for waterproofing-Part 10:Bitumen,plastic and rubber sheets for waterproofing-watertightness GB328.10-2007Accredited only for: B method11Waterproofwrap material5Flexibility at low temperature, bending property at low temperature1016Test methods for building sheets for waterpr

47、oofing - Part 14: Bitumen sheets for waterproofing- flexibility at low temperature GB328.14-2007 Test methods for building sheets for waterproofing - Part 15: plastic and rubber sheets for waterproof-foldability at low temperature GB328.15-20076Heat resistance1016Test methods for building sheets for

48、 waterproofing-Part 11: Bitumen sheets for waterproofing-flow resistance at elevated temperature GB 328.11-20077Water absorption1016Test methods for building sheets for waterproofing-Part 27:Bitumen,plastic and rubber sheets for waterproofing- water absorption GB328.27 -200712Styrene butadiene styre

49、nd (SBS) modified bituminous sheet materialsPart parameters1016Styrene butadiene styrend (SBS) modified bituminous sheet materials GB18242-2008Accredited only for: water imperme-ability, heat resistance, pull force, elongation percent at the largest force, flexibility at low temperature13Aractic pol

50、ypropylene (APP) modified bituminous sheet materialsPart parameters1016Aractic polypropylene (APP) modified bituminous sheet materials GB18243-200814Bitumen flexible waterproofing membrane with double reinforcementPart parameters1016Reclaim crumb rubber modified bituminous waterproofing sheet using

51、a combinative reinforcement of nonwove and glass fabric mesh JC/T690-2008Accredited only for: water impermeability, heat resistance, pull force, fracture elongation, flexibility15Self-adhering polymer modified bituminous waterproof sheetPart parameters1016Self-adhering polymer modified bituminous waterproof sheet GB23441-2009Accredited only for: water impermeability, heat resistance, pull force, fracture elongation, flexibility at low temperature16Polymer water-proof sheetPart parameters1016Polymer water-proof materials- Part 1: Water-proof sheet GB18173.1-2006Accredited only for: water