管路详细设计学习教案

1、会计学1管路管路(un l)详细设计详细设计第一页，共23页。20.5 day第1页/共22页第二页，共23页。38Implementing Turn Rules管路拐弯8Placing Parts on a Run管路定义(dngy)功能8Generating Reports 生成管路拐点坐标第2页/共22页第三页，共23页。41. Select the Start Menu3. Click on Tubing Design2. Select Equipment & SystemsTubing Design Workbench icon选择(xunz)Start菜单选择设备和系统方案

2、选择管路设计模块图标第3页/共22页第四页，共23页。5Line ID: Select/Query, Create, Transfer, Rename, Delete, Merge, Import管路管路(un l)ID码编辑码编辑Route a Run生成生成(shn chn)管路管路Update Part, Flip Part Position, Edit Part Parameters刷新刷新(shu xn)功能、功能、参数参数Place Tubing Part插入接头插入接头Offset Route, Route from Spline, Route thru a pathway偏距管

3、路等偏距管路等Connect/Disconnect Part/Run, Create an offset segment con.连接Manage grafic representation几何显示几何显示Manage flows流量管理流量管理Create weld assembly管路焊接管路焊接Build Tubing Part新建功能新建功能Align Side, Align Center, Rotate to Align, Distribute, Align two Planes移动移动Rename ID重新命名重新命名ID Snap, Snap three points, Snap

4、 center of polygon, snap Surface捕捉捕捉第4页/共22页第五页，共23页。6AxisGridStepSnap:To current Axis当前坐标轴当前坐标轴To last Position最后位置最后位置To XY Plane XY面面To all Plane所有平面所有平面To Elevation Plane抬高平面抬高平面To Drafting Elements平面元素平面元素Snap Tool Options捕捉工具捕捉工具Offset PlanesAdvanced Offset PlanesToggle Dimming ModeToggle Anal

5、ysis Mode坐标轴网格(wn )距离生成(shn chn)平面显示(xinsh)模式第5页/共22页第六页，共23页。7Place Offset Plane生成起始面Select the Offset Plane Icon选择(xunz)图标Offset Planes can be placed at anytime during the creation of Runs.此图标可以在生成管路时随时使用Offset Plane图标第6页/共22页第七页，共23页。8第7页/共22页第八页，共23页。9Click when the green arrow pops up.Stop when

6、 the value reaches 2in.Point-To-Point-ModeRoute a Run图标当绿箭头(jintu)出现时点击鼠标当到达一定长度时停第8页/共22页第九页，共23页。10第9页/共22页第十页，共23页。11Route a RunOrthogonalCreate the Run生成(shn chn)管路对角线方式产生管路第10页/共22页第十一页，共23页。12Manipulation Handles8 Modify the Run修改管路修改管路8Runs can be edited by right clicking and choosing Runxxx.

7、object Definition in the contextual menu. You will see the skeleton of the Run, that consists of Segments, Nodes and Manipulation Handles.在管路上右击鼠标选择在管路上右击鼠标选择Definition菜单，将显示管路骨架，包括分段、节点和操纵柄菜单，将显示管路骨架，包括分段、节点和操纵柄8Segments can be stretched by dragging the green vertexes at the end of each segment.其中的

8、分其中的分段可以段可以(ky)通过鼠标拖拉端点而改变长度通过鼠标拖拉端点而改变长度SegmentNodeAlignment of the Run操纵(cozng)柄节点分段管路导向第11页/共22页第十二页，共23页。138 Modify the Run修改管路修改管路8Segments and Nodes can also be modified when the Run is in definition mode. You can modify Segments and Nodes by right clicking them.也可以在上下文菜单中也可以在上下文菜单中选择定义来修改分段选择

9、定义来修改分段(fn dun)和节点和节点Right click on segmentRight click on run第12页/共22页第十三页，共23页。148 Modifying the Run修改管路修改管路8Runs can also be modified by dragging the Planes at the end of each segment. The alignment of the planes depends on the alignment of the Compass! These Planes and the basic Plane of the Comp

10、ass are always parallel!8 也可以通过拖拉也可以通过拖拉(tul)分段两端的平面改变管，此平面的朝向和罗盘的基准平面一致分段两端的平面改变管，此平面的朝向和罗盘的基准平面一致8During the modification of Runs the Offset Plane can be used to allow an exact placement.修改中修改中可以使用等间距平面图标可以使用等间距平面图标Offset PlaneDistance to Offset plane等间距平面(pngmin)命令间距第13页/共22页第十四页，共23页。158 Transfe

11、ring a Line ID转换管路转换管路ID码码8Before you start creating a Run you must select the proper Line ID. Its possible to change the Line ID afterwards by using the Transfer Line ID function.先选择先选择(xunz)ID码再生成码再生成8Select the Run, which Line ID has to be changed and the Transfer Line ID Icon.8In the appearing d

12、ialog box you can select the new Line ID.管路生成后用转换图标改管特管路生成后用转换图标改管特性性8The appearing information dialog close with OK.确定确定Selected RunSelect the new Line ID here.Click OK to put it onto the Run.Transfer Line ID选择(xunz)管路转换码图标选择新的ID码确定第14页/共22页第十五页，共23页。16Design Table button activates the Rules option

13、s.8 Implement Turn Rules设置拐弯半径设置拐弯半径8You can adjust the Bend Radius for the Run using Rules from Design Rules catalog when starting the creation of a new Run.修改拐弯规则修改拐弯规则8When you are using a Line ID for the first time, the Design Table for the available Turn Rules appears automatically. Later you m

14、ust click on the Design Table Button to access the Rules.生成生成(shn chn)管路对话框中使用拐弯规则，选择不同半径管路对话框中使用拐弯规则，选择不同半径Available Bends for the selected Line ID.拐弯(guiwn)规则可选择的半径第15页/共22页第十六页，共23页。178 Modify Turn Rules修改规则修改规则8You can modify the Turn Rule of a Run by right clicking it and then enter the Definit

15、ion Dialog.右键上下文菜单选择右键上下文菜单选择Definition8There you can enter a new Radius which effects the whole Run.输入半径，影响输入半径，影响(yngxing)整个管路整个管路Definition dialogEnter the new Radius here.The new radius will effect all bends in the Run.定义(dngy)对话框输入新半径整个管路的弯受影响第16页/共22页第十七页，共23页。18Radius is now 0,5” (only for th

16、is bend).BEFOREAFTER8 Override Turning Rules超越规则超越规则8To apply a certain bend radius to one bend of the Run you must enter the Definition Dialog of the corresponding Node.修改单个弯需要使用节点的上下文定义修改单个弯需要使用节点的上下文定义(dngy)菜单菜单8Therefore enter the definition of the Run (right click Runxxx.object Definition) and

17、then the definition of the node (right click the node Definition).两次上下文菜单两次上下文菜单8In the appearing Node Definition you can enter a Bend Radius that only effects the selected Bend.Node Definiton DialogEnter the new radius here.Enter the definiton dialog of the node.如图所示节点(ji din)定义对话框输入新半径值第17页/共22页第十

18、八页，共23页。198 Place Parts on a Run8Select the Place Tubing Part Icon.选择图标选择图标 8Check, that spec driven is turned off.关闭关闭spec driven按钮按钮8The Place Tubing Part Dialog appears. Click on the Browse Button (“”).选择浏览选择浏览8A class browser appears that lets you select a function.窗口窗口(chungku)中选择功能中选择功能Place T

19、ubing PartBrowse图标浏览浏览(li ln)第18页/共22页第十九页，共23页。20BEFOREAFTER8 Place Parts on a Run插入接头插入接头8For the selected function you must specify a Part Type.对于选择的功能对于选择的功能(gngnng)，选择一个类型选择一个类型8Click on the Run where you want to place the Part. At the end of Runs or Tubing parts a green vertex appears to show you, there is a connector. You can also use this connetors for placement.选择管路，出现一个绿色节点选择管路，出现一个绿色节点8If there are multiple parts aviable for the selected Part Type, then a Part Selection dialog box will be displayed