井监岗位职责

1、Word 井监岗位职责 【第1篇】钻井监督岗位职责 钻井现场监督 斯伦贝谢 斯伦贝谢长和油田工程有限公司,斯伦贝谢,斯伦贝谢长和油田,斯伦贝谢 职责描述: coordinates well operations with drilling contractor, schlumberger segments and third parties to ensure compliance with work programs, ipm standards, project procedures and contract requirements. 在钻井作业中,协调钻井承包商,斯伦贝谢各部门及第三方

2、,以确保作业符合建井程序,ipm标准、项目程序及合同要求. prepares 24-hour look ahead document with rig supervisors. 和钻机监督共同预备24小时作业方案 attends daily planning meeting with drilling superintendent and the rig supervisors. 参与与钻井总监和钻机监督的每日方案会议. issues written instructions to drillers for each tour based on well program highlightin

3、g potential risks such as stuck pipe, losses and kicks. 向司钻发送依据建井设计所做的书面指令,并指出例如卡钻, 漏失和井涌的潜在风险. prepares detailed procedures for specific well operations (running casing, cementing, logging etc.). 预备详细的建井程序 (比如下套管,固井,测井等) performs wellsite calculations e.g. cement jobs 供应现场的计算数据, 比如固井作业. ensures wel

4、l control event preparedness (scrs, leak off tests, bop tests, kick sheets, shut in procedure etc.). 时刻确保应对井控大事发生的预备( 无线电台,地层漏失测试, 防喷器测试, 井涌记录单, 关井程序等) ensures stuck pipe event preparedness (drillers first actions, maximum allowable overpull, fishing equipment etc) 时刻确保做好防止卡钻预备(司钻第一反应行为, 最大允许上提载荷, 打

5、捞工具等) attends the rig floor to supervise critical activities such as (but not limited to) landing, cementing, and testing casing; flow checks, and while pulling the first ten stands while tripping etc 亲自监督钻台关键作业, 例如但不仅限于:坐放, 固井, 套管测试,溢流检测以及起下钻头十柱作业. verifies adherence to instructions and procedures.

6、 确认相关的指令及程序得到执行. organizes pre-job meeting (operations and safety). 组织作业前会议(有关作业和平安) maintains “7 day planner” to anticipate resource requirements to meet well demands and provide optimum efficiency of services including contingency plans. 维护“7日方案”来保障材料供应达到建井的需求,并供应最优化效率的服务,包括意外事故应对方案 prepares stand

7、ard equipment lists (if applicable) in a timely manner for each phase of the well. 预备建井周期中所需设备清单(假如有的话) ensures material requests are issued in a timely manner to avoid disruption of operation. 确保材料需求方案准时发出以预防作业中断。 responsible for checking equipment on site to ensure readiness. (qa/qc) 负责建井现场设备检查,确保设备正常运行.(qa/qc) manages proper inventory of consumable drilling supplies such as cement, barite, bits, and nozzles, etc. 更新