grub的使用.ppt

1、How to use Grub,IN LINUX 2010.12.23,CONTENT,After starting the engine into the GRUB program, select your system interface, the user can stop the running GRUB into the GRUB program, manually set GRUB parameters, and then start the system. If the user needs to enter BRUB, when you start to BRUB select

2、ion interface, as shown, through the cursor keys to move the black display bar, select the operating system need to manually edit the name. Then click the button e to enter edit the status of the operating system boot parameters as shown in Figure (1),Figure (1), Display start set the parameters of

3、the system. If you need to add a new line, press theo key,in the current black displaya new line inserted after section. Press e key to enter the input after the input state. Enter carriage return to return after completion of figure (1) of the interface. If you do not save can also press the Esc ke

4、y to return to the original interface. If you want to delete the line press the d key, and the vi editor is somewhat similar. By b key to boot the system is started.,If you edit the original line, then ove directly to the diverted to the black display bar, and then press the e key to enter the modif

5、ications of the state. This adds a new line e key to enter the same state, as shown in Figure （2） said:,The work of booting the system by entering commands, step by step guide system startup. In Figure (1) interface, press c key, enter the command into the wait state. Enter the command root hard dis

6、k and partition where the kernel is the format for the root (hard disk, partition). Enter the kernel command kernel path in the partition, loading the kernel mode, and system files with the disk where the partition. Format kernel / path / file name to load the kernel type root = / dev / disk partiti

7、on. Command in the GRUB configuration file using the parameters used in the same way.,Command boot system commands to start, start with the argument is based on user input parameters to start, the parameters of the original configuration file does not work. Manually set GRUB parameters to the kernel files and system partition are familiar with, or can not start the system,start a new kernel debugging in general, can offer great help.,GRUB using the command help to display all the commands, as shown in Figure (3) said ：,Command to reboot to restart the h