UPS清关须知.ppt

1、Exporting Textiles to US complete items descrptn, fabric details/sheet (i.e. cotton,wool) gender (man/woman/boy/girl) delays up to 48 hrs. NETHERANDS:For shpts over USD 65, non-EC orig, form A/CoO/EUR cert required TURKEY:Quota Certificate is necessary for the textiles which are sent from specific c

2、ountries. Each commodity above 50 kg & not subject to Quota Certificate: Exporter Registry Form approved by Turkish Consulate at origin is necessary from cnor and accordingly Registration Certificate from Textile Union is necessary from cnee.If the origin country is a member of EU, shipments should

3、be sent witn ATR cert.If the origin country is a member of EFTA, shipments shouldbe sent with EUR 1 cert.If shipments are sent from out of EU &EFTA, Certificate of Origin must be sent with shipments. AUSTRIA:Certificate of origin required. Exception: If commercial value including freight charges is

4、less then 835,- EUR. SWITZERLAND:If over 20kgs (44lbs), import licence required. If EC/EFTA origin, EUR1 form required.,Table of contents 目录,Clearance documents 纺织品清关单证 Common problems caused clearance delay 影响快速清关的常见问题 Document samples and requirements 单证样本及要求 Clearance documents checklist 纺织品清关单证注

5、意事项 Requirements on mutilated and marked samples 割剪或唛头样品具体要求,Mutilation or marking must be done in the original country prior to arrival in the destination 割剪及唛头必须在始发地处理完成 AWB 打洞处理, 洞口直径不得小于1英 寸(26毫米),Requirements on mutilated and marked samples 割剪或唛头样品的具体要求,Fabric over 8-inch square must be diagona

6、lly marked or mutilated every 18-inch (450mm) 超过8平方英寸(200mm)的布样必须每隔对角线18英寸(450mm)进行割剪或 唛头处理 Fabric over 2 yards (1m) in length does not qualify as a sample even if marked or mutilated 宽幅超过1米的布料无论是否作割剪或唛头处理都不被认为是样品 Internal sample tag can not be considered as qualified sample by Customs 服装内部挂有样品标识的吊牌

7、是不能被海关予以认可的样品标识,Requirements on mutilated and marked samples 割剪或唛头样品的具体要求,TEAR,STAMP,PUNCH,CUT,2-inch/51 mm,1-inch/26 mm diameter,SAMPLE,SAMPLE,1-inch height by 2-inch length,2-inch/51mm on front of garment,Requirements on mutilated and marked samples 割剪或唛头样品的具体要求,Sew a 64mm by 38mm label with words

8、 SAMPLE NOT FOR RESALE on the item close to the Country of Origin label,Requirements on mutilated and marked samples 割剪或唛头样品的具体要求,SAMPLE,every 0.5 meter,every 0.5 meter,SAMPLE,SAMPLE stamp 1-inch height, 2-inch length,If fabric length exceeds 2 meters or is not marked, fabric is dutiable,o,Mutilatio

9、n can be done either by punching holes (1-inch diameter) or by making cuts/tear (2-inch length) or by stamping the word SAMPLE (1-inch height x 2-inch length) every 18 inches diagonally across the sample,height,length,length,height,Requirements on mutilated and marked samples 割剪或唛头样品的具体要求,Not more t

10、han 457 mm,Punch a hole of 2-inch / 51mm diameter every 457mm along the longest side and diagonally across the sample,1829 mm,Stamp SAMPLE in uppercase, at least 26mm high and 127mm long in contrasting color every 147mm diagonally across sample,Requirements on mutilated and marked samples 割剪或唛头样品的具体要求,Sample,Unfinished textile samples less than 8 x 8 inches / 303mm x 303mm can be sent without marking or mutilation. Any size greater will need to be marked or mutilated. Always mentio