C51 PG12864f proteus仿真

1、精选文档这个别人是用AVR单片机仿的，我只会C51就把它的仿真图和程序改了下，调试了可以显示。因为我也没有PG12864f的液晶资料，不过大家可以对着程序理解下，其实原理和1206有点类似。仿真总图：单片机接线图：12864液晶接线：#include #define uchar unsigned char#define uint unsigned intsbit wr=P20;sbit rd=P21;sbit ce=P22;sbit cd=P23;sbit rst=P24;void delay(uint t);void init_12864();void write_data(uchar da

2、t);void write_cmd1(uchar cmd);void write_cmd2(uchar dat,uchar cmd);void write_cmd3(uchar data1,uchar data2,uchar cmd);uchar read_status();void check_status();void clear_screen();void display_char(uchar x,uchar y,uchar ch);int main()uchar i,j=0;init_12864();for(i=0;i128;i+) display_char(i/16,i%16,0+i

3、); clear_screen();/处在x y处显示chvoid display_char(uchar x,uchar y,uchar ch)/x 0-7 y 0-15write_cmd3(x*2)4)+y),0x00,0x24);/地址指针位置write_cmd2(ch-32,0xc0);/t6963c字符表与ASCII差32void delay(uint t)uint i,j;for(i=0;it;i+) for(j=0;j114;j+);void init_12864()P2=0Xff;P1=0Xff;rst=1;delay(10);rst=0;wr=1;rd=1;ce=1;cd=1;

4、rst=1;check_status();write_cmd3(0x01,0x00,0x21);/光标指针设置check_status();write_cmd3(0x00,0x00,0x40);/文本区首地址check_status();write_cmd1(0x80);/显示方式设置，正常显示check_status();write_cmd1(0x94);/。显示状态设置 1 0 1 0 N3 N2 N1 N0 文本显示，光标不显示，不闪烁/write_cmd1(0x98);/图形方式显示，不显示字母，只打点check_status();write_cmd1(0xa1);/光标形状设置1 0

5、 1 0 0 N2 N1 N0void clear_screen()uint i;write_cmd3(0x00,0x00,0x24);/地址指针设置check_status();write_cmd1(0xb0);/数据自动写，每写一次，地址指针自动加一check_status();for(i=0;i8192;i+) check_status(); write_data(0X00);check_status();write_cmd1(0xb2);/数据自动写结束void write_data(uchar dat)rd=1;cd=0;ce=0;wr=0;P0=dat;delay(10);wr=1

6、;ce=1;cd=1;void write_cmd1(uchar cmd)rd=1;cd=1;ce=0;wr=0;P0=cmd;delay(10);wr=1;ce=1;cd=0;/先送参数，再送指令void write_cmd2(uchar dat,uchar cmd)check_status();write_data(dat);check_status();write_cmd1(cmd);void write_cmd3(uchar data1,uchar data2,uchar cmd)check_status();write_data(data1);check_status();write_data(data2);check_status();write_cmd1(cmd);uchar read_status()uchar status;P0=0;/端口b置为输入rd=0;wr=1;ce=0;cd=1;status=P1;return status;void