on-line publication index - Welcome to Ohio University.doc

1、Jay S. Gunasekera page 10August 2008PUBLICATIONSBooks & chapters1. Tool and Manufacturing Engineers Handbook, Chapter on Blanking and Forming SME, 1983.2. CAD/CAM of Dies, Ellis Horwood Ltd., U.K. and John Wiley, NY, 1989.3. Strength of Materials, Volume 2: Advanced Theory and Applications, with Joh

2、n M. Alexander, Ellis Horwood Ltd., U.K. and Simon & Schuster, NY, 1991.4.Intelligent Manufacturing McGraw-Hill Year Book of Science & Technology 1998, McGraw-Hill (1998) 77-79, with co-author S. Venugopal5.ASM Handbook on Metal Forming, Chapter on Hot Extrusion, 2005REFEREED JOURNAL PAPERS1. J.S. G

3、unasekera and J.M. Alexander, On the geometrically similar expansion of a hole in a thin infinite plate. Proc. Royal Soc. London, A.326, pp. 316373, 1971. Communicated by H. Ford, F.R.S. May 1971.2. J.S. Gunasekera and K. Ramanathan, A method to estimate the coefficient of friction in cold rolling.

4、Quart. J. I. Engineers, Sri Lanka, Vol. 2, No. 3, pp. 2730, 1974.3. J.S. Gunasekera, Appropriate Technology, The Nation, Vol. 9, No. 32, pp. 1012, Sri Lanka, Sept. 1974. 4. J.S. Gunasekera, Work-study in the new Department of Production Engineering. J. of Inst. Work Study, Organization & Methods, Sr

5、i Lanka, Vol. 1, No. 1, pp. 16, 1976.5. J.S. Gunasekera, Production Engineering and Role of the Production Engineer.Trans. of the Institution of Engineers, Sri Lanka, pp. 5155, 1976.6. J.S. Gunasekera and H.P. Fernando, Economic batch production at the hot rolling mill of the Ceylon Steel Corp. Q.J.

6、 Engineer, Vol. 4, No. 4, pp. 2629, 1976.7. J.S. Gunasekera, Sri Lankas Cast iron Foundry Industry, Karmantha, J. of Industrial Development Board, Vol. 5, No. 3, pp. 15, 1976.8. J.S. Gunasekera, Scheduling a multiproduct single machine system with variable set up costs. CIRP (The Intl. Inst. for Pro

7、duction Engineering Research) Annals, Vol. 25, No. 1, pp. 303306,1977.9. J.S. Gunasekera, The use of the finite element method in engineering problems. Trans. Inst. of Engineers, Sri Lanka, pp. 19, 1977.10. J.S. Gunasekera, S.G. Rajakaruna and S.K.D. Peiris, The design and construction of an extrusi

8、on rig. Q.J. Engineer, Sri Lanka, Vol. 6, No. 2, pp. 3234, June 1978.11. J.S. Gunasekera and G. Waugh, Machinability testing of free machining steels, Q.J. Engineer, Sri Lanka, Vol. 7, No. 2, pp. 2429, 1979.12. J.S. Gunasekera and S. Hoshino, Extrusion of Non-circular sections Through Shaped Dies, A

9、nnals Int. Inst. Prod. Eng. Res. (CIRP), Vol. 29, pp. 141145, 1980.13. S. Hoshino and J.S. Gunasekera, An Upper-bound Solution for the Extrusion of Square Section from Round Bars through Converging Dies, 21st International MTDR, U.K., Vol. 21, pp. 97105, 1980.14. J.S. Gunasekera and S. Hoshino, Anal

10、ysis of Extrusion of Drawing of Polygonal Sections Through Strictly Converging Dies, Trans. ASME, J. of Eng. for Industry, Vol. 104, pp. 3845, 1982.15. J.S. Gunasekera and S. Havranek, J. The Effect of Specimen Size on StressStrain Behavior in Compression, Trans. ASME, J. of Materials Technology, Vo

11、l. 104, pp. 274279, 1982.16. J.S. Gunasekera, H.L Gegel, J.C. Malas and S.M. Doraivelu, Computer Aided Process Molding of Hot Forging and Extrusion of Aluminum Alloys, Annals of CIRP, Vol. 31, No. 1, pp. 131136, 1982.17. J.S. Gunasekera, H.L. Gegel, J.C. Malas, and S.M. Doraivelu, CAD/CAM of the Die

12、, Trans. ASME, J. of Computers in Mechanical Engineering, Vol. 1, No. 1, pp. 5862, 1982.18. J.S. Gunasekera, H.L. Gegel, J.C. Malas, S.M. Doraivelu and J.C. Graham, Computer Aided Design of MultiHoled Stream lined Extrusion Dies, Annals of CIRP, Vol. 33, No. 1, pp. 12931, 1984.19. S.M. Doraivelu, H.

13、L. Gegel, J.C. Malas, J.S. Gunasekera and J.F. Thomas, A New Yield Function for Compressible P/M Materials, Int. J. Mech. Sci. Vol. 26, No. 9/10, pp.527535, 1984.20. J.S. Gunasekera and S. Hoshino, Analysis of Extrusion or Drawing of Polygonal Sections through Streamlined Dies, Trans. ASME, J. of En

14、g. for Industry, Vol. 107, pp. 229233, Aug. 1985.21. J.R. Collier and J.S. Gunasekera, Improved Processes for Extrusion of Metals and Polymers, ASTM Standardization News, Vol. 14, No. 2, pp. 4548, July 1986.22. J.S. Gunasekera and J.M. Alexander, Analysis of Rolling, Annals of CIRP, Vol. 36, No. 1,

15、pp. 2036, 1987. 23.J.S. Gunasekera, E.J. Chitty and V.S. Kiridena, Analytical Modeling of the Buckling Behavior of High Aspect Ratio Billets, Annals of CIRP, Vol. 38/1/1989, pp. 249-25224.O.W. Dillon, R.J. De Angelis, W.Y. Lu, J.S. Gunasekera, and J.A. Deno, The Effects of Temperature on the Machini

16、ng of Metals, Journal of Materials Shaping Technology, Vol. 8, No.1, pp. 23-29, 1990.25.R. Srinivasan, J.S. Gunasekera, H.L. Gegel and S.M. Doraivelu, Extrusion Through Controlled-Strain-Rate Dies, Journal of Materials Shaping Technology, Vol. 8, No.2, pp. 133-141, 1990.26.S. Rachakonda, S. Gengusam

17、y, J.S. Gunasekera, and S.N. Dwivedi, Computer-aided Process Design for the Manufacture of Rolled Rings, Int. Journal Computer Integrated Manufacturing, Vol. 4, No. 2, pp. 97-104, 1991.27.J.S. Gunasekera and J.C. Malas, Conceptual Design of Control Strategies for Hot Rolling, Annals of the CIRP, Vol

18、. 40/1/1991, pp. 123-126.27.J.S. Gunasekera, Computer Modeling of Net-Shape Manufacturing Processes, Professor E.O.E. Pereira Commemoration Volume, Institute of Engineers, Sri Lanka, pp. 177-198, 1992.28.J.S. Gunasekera, A.F. Ali, R. Anbajagane, L. Dewasurendra, Design, Analysis and Experimental Ver

19、ification of the Pack-rolling process, Annals of the CIRP, Vol. 42/1/1993, pp. 287-290.29.J.S. Gunasekera and A.F. Ali, A Three-Step Approach to Designing a Metal forming Process, JOM, Journal of Metals, June 1995, pp. 21-24.30.Jay S. Gunasekera and Amer F. Ali, Design of Forming Processes, Int. J.

20、of Advanced Manufacturing Systems, Vol. 1, Issue 1, 1997, pp. 123-133.31.Hamza Ghulman, Bhavin Mehta and Jay S. Gunasekera, An Improved Upper Bound Method for Flow Analysis in Converging Extrusion Dies, SME-NAMRI, Tech. Paper. MF97-175, May 1997.32.K. Sawamiphakdi, G.D. Lahoti, J.S. Gunasekera and R

21、. Kartik, Development of Utility Programs for a Cold Drawing Process, J. of Materials Processing Technology, Elsevier, 80-81 (1998) 392-39733. J.S. Gunasekera Z. Jia, J.C. Malas and L. Rabelo, Development of a neural network model for a cold rolling process, Journal of Engineering Applications of Ar

22、tificial Intelligence, Vol. 1, No. 7, (1998)34. B.V. Mehta, J.S. Gunasekera and S. Shivananda, Virtual Material Processing (VMP) on the Web, CIRP Journal of Manufacturing Systems, Vol. 29 (1999), No.335. J.S. Gunasekera, R.A. Belinski, Design, An Investigation of the Pinch and Roll Process of Compre

23、ssor Airfoil Manufacture, Annals of the CIRP, Vol. 49/1/2000, pp. 181-184.36. V. Ranatunga, V., J.S. Gunasekera, W.G. Frazier, K.D. Hur, Use of UBET for design of flash gap in closed-die forging, Journal of Materials Processing Technology, Apr 200137. B.V. Mehta, I. Al-Zkeri, J.S. Gunasekera, A. Bui

24、jk, 3D flow analysis inside shear and streamlined extrusion dies for feeder plate design, Journal of Materials Processing Technology, Jun 200138. Adel Alfozan and Jay S. Gunasekera, Design of profile Ring Rolling by Backward Simulation using Upper Bound Element Technique (UBET), J. of Manufacturing

25、processes, Vol. 4, No. 2, 200239. Adel Alfozan and Jay S. Gunasekera, An Upper Bound Element Technique Approach to the Process Design of Axisymmetric Forging by Forward and Backward Simulation, J. of Materials Processing Technology, Vol. 142, 2003 pp 619-62740. Vipul Ranatunga, Jay S. Gunasekera, Su

26、has Vaze and Urban de Souza, Three-Dimensional UBET Simulation for Seamless Ring Rolling of Complex Profiles, SME-J of manufacturing processes, Vol. 6, No. 2, 200441. Vipul Ranatunga and Jay S. Gunasekera, UBET Based Numerical Modeling of Bulk Deformation Processes, ASM-J of Materials Engineering an

27、d Performance, Vol. 15, No. 1, 200642. Sesh Tamirisa, Daniel Miracle, Raghu Srinivasan and Jay S. Gunasekera, Titanium alloyed with Boron, ASM-J. of Advanced Materials & Processes, Vol. 164, No. 12, Dec 2006REFEREED CONFERENCE PAPERSInternational 1. J.S. Gunasekera and J.M. Alexander, Matrix analysi

28、s of the large deformation of an elasticplastic axially symmetric continuum. Int. Symp. on Foundations of Plasticity, Warsaw, Poland, Noordhoff Int., pp. 125 146, Sept. 1972.2. J.S. Gunasekera, H. Lee, and P.L. Cornie, Computer aided batch production scheduling. Proc. Int. Conf. Production Research,

29、 Amsterdam, sponsored by CIRP Scheltema & Holkema, abstract, pp. 57, Aug. 1979.3. J.S. Gunasekera and R.M. Hobbs, Stable shear separation in fine blanking. Fourth Tewksbury Symp., University of Melbourne Press, Australia, pp.10.110.7,Feb 1979.4. J.S. Gunasekera, A computer graphics system for CAD of

30、 shaped extrusion dies. Int. Conf. Manuf. Eng., cosponsored by CIRP and I.E. Aust., Australia, pp. 7579, 1980.5. P.F. Thomson and J.S. Gunasekera, The Mechanics of Conventional and Fine Blanking, Int. Conf. Manuf. Eng., cosponsored by CIRP and I.E. Aust., Australia, pp. 7579, 1980.6. J.S. Gunasekera

31、, On the wrinkling of sheet metal during deep drawing. CIRP Conference, Sydney, Australia, pp.111, 1980.7. J.S. Gunasekera, Computer aided modeling and design of shaped extrusion dies. ASME Century 2, Int. Comp. Tech. Conf., San Francisco, CA, pp. 452459, 1980.8. J.S. Gunasekera, Development of a CA

32、D system for shaped engineering parts. ACADS Int. Symp. on CAD/CAM, Melbourne, Australia, pp. 3238, Oct 1980.9. P.F. Thomson and J.S. Gunasekera, On the wrinkling of sheet metal during deep drawing. Proc. NAMRC X, Vol. 15, pp. 173 179, May 1982.10. J.S. Gunasekera, H.L.Gegel, J.C. Malas and S.M.Dora

33、ivelu, Application of rigid visco-plastic finite element method to metal forming problems. Proc. 4th Int. Conf. in Australia on Finite Element, Melbourne, pp. 174179, Aug. 1982.11. H.L. Gegel, J.C. Malas, J.S. Gunasekera and S.M. Doraivelu, CAE of hot forging and extrusion of air frame and engine co

34、mponents Proc. ASME 2nd Intl. Conf. on Computers in Engineering, San Diego, CA, pp. 278282, Aug. 1982.12. J.C. Malas, H.L. Gegel, S.M. Doraivelu, J.S. Gunasekera and S.I. Oh, An investigation of the mathematicalmodeling technique used for analyzing industrial metal working processes. Proc. 11th NAMR

35、C, pp. 203210, Wisconsin, May 1983.13. R. Kavalauskas, J.S. Gunasekera, H.L. Gegel, S.M. Doraivelu, and J.C. Malas, Use of CAD/CAM to manufacture streamlined dies for extrusion of complex materials. Proc. 11th NAMRC, pp. 252258, Wisconsin, May 1983.14. J.S. Gunasekera, J.C. Malas, H.L. Gegel, S.M. D

36、oraivelu and J.T. Morgan, Computer Aided Design of Extrusion Dies by Metal Flow Simulation, Proc. 3rd International Computer Conference and Exhibition (ASME), Chicago, Il., August 1983.15. H.L. Gegel and J.S. Gunasekera, ComputerAided Design of Dies by MetalFlow Simulations, AGARD, NATO, Paper No. 1

37、37, pp. 81:88, France, 1984.16. J.S. Gunasekera and J. Jayasuriya, Computer Aided Manufacturing of Streamlined Extrusion Dies, ASME Intl. Computers in Engineering, Vol. 2, pp. 393400, Las Vegas, 1984.17. J.S. Gunasekera, J.R. Collier, K.R. Halliday, R.A. Lawrence, O.E. Adams, S. Sargand and B.J. Col

38、lier, Research in CAD/CAM and Robotics at Ohio University, International Robotics Conference, UNC, Charlotte, North Carolina, December 1984.18. J.S. Gunasekera, H.L. Gegel, J.C. Malas and S.M.Doraivelu, CAD/CAM of Streamlined Extrusion Dies, ASM, Advances in the Production of Tubes, Bars and Shapes.

39、 Cincinnati, pp. 275 280, April 1985.19. J. Ramanathan, S.M. Doraivelu and J.S. Gunasekera, Development of an Intelligent Apprentice System for Extrusion Die Design and Process Simulation, Proc. ASME Intl. Computers in Eng. Conf. Vol. 11, pp. , Boston, 1985.20. J.S. Gunasekera and J. Jayasuriya, MIC

40、ROSTREAM & MICRO CUTTER, CAD/CAM of Dies on a PC, Proc. ASM, pp. 117120, Toronto, Oct. 1985.21. J.C. Malas, J.S. Gunasekera and R. Srinivasan, Finite Element Simulations of Some Unit Processes, Proc. ASME Intl. Computers in Engineering Conf., Chicago, July 1986.22. J.S. Gunasekera, CAD/CAM of Dies,

41、Keynote address given at the International Conference on Manufacturing Engineering, New Castle, Australia, Proc. I.E. Aust, Aug. 1986.23. J.S. Gunasekera, S.M. Doraivelu and J. Ramanathan, An Expert Like System for Die Design and Process Selection, Proc. I.E. Aust, Int. Conference on Manufacturing E

42、ngineering, New Castle, Australia, pp 27580, Aug. 1986.24. H.L. Gegel, J.C. Malas, S.M. Doraivelu, J.M. Alexander and J.S. Gunasekera, Materials Modeling and Intrinsic Workability, Trans. Int. Conf. Tech. of Plasticity, Stuttgart, Aug. 1987.25. J.S. Gunasekera and S. Ramasamy, On the Slab Analysis o

43、f Rolling, Proc. Manufacturing International 1988, Atlanta, Georgia, April 1988.26. J.S. Gunasekera and E. Chitty, Computer Modeling of the Buckling Behavior of High Aspect Ratio Billets, Proc. Third Intl. Conf. on ComputerAided Production Engineering, U. of Michigan, Ann Arbor, June 1 3, 1988.27.S.

44、 Gengusamy, J.S. Gunasekera and S. Srivatsa, Analysis of Ring Rolling with Material Modeling, Proc. of the First International Conference on Ring Rolling, Ohio University, Athens, Ohio, pp. 69-76, May 9-10, 1988.28.S. Rachakonda, J.S. Gunasekera and S. Srivatsa, Computer-Aided Preform Design for Rin

45、g Rolling, Proc. of the First International Conference on Ring Rolling, Ohio University, Athens, Ohio, pp. 77-88, May 9-10, 1988.29.N. Venkatesan, J.S. Gunasekera and S. Srivatsa, Computer Modeling of Heat Transfer During Ring Rolling, Proc. of the First International Conference on Ring Rolling, Ohi

46、o University, Athens, Ohio, pp. 89-100, May 9-10, 1988.30.N.V. Hattangady and J.S. Gunasekera, Computer Modeling of Flow Lines in Metal Forming Processes, Trans. NAMRI, SME, pp. 3-7, May 1989.31.V. Kiridena, A. Chaudhary, J.S. Gunasekera, and J.C. Malas, A 3-D Search and Interpolate Algorithm for Re

47、meshing in Metal Forming Analysis, Proc. of the 3rd Intl. NUMIFORM Conf., Fort Collins, Colorado, pp.185-189, June 26-30, 1989.32.D.K. Rusia and J.S. Gunasekera, A Modified Viscoplastic Formulation for Large Deformations Using Bulk Modulus, Proc. of the 3rd Intl. NUMIFORM Conf., Fort Collins, Colora

48、do, pp.587592, June 26-30, 1989.33.W.R. Terry, Y.J. Huang, J.S. Gunasekera and R. Sims, Knowledge Based System for Predicting Maximum Allowable Cutting Force During Broaching, Xth ICPR - The Tenth International Conference on Production Research, The University of Nottingham, U.K., August 15-17, 1989

49、.34.R. Srinivasan, J.S. Gunasekera, H.L. Gegel and S.M. Doraivelu, Extrusion Through Controlled-Strain-Rate Dies, Proc. of the International Conference on Extrusion, Ohio University, Athens, Ohio, pp. 145-166, December 6-8, 1989.35.B.V. Mehta and J.S. Gunasekera, CAD/CAM/CAE of Dies for Extrusion of

50、 Metals and Polymers, Proc. of the International Conference on Extrusion, Ohio University, Athens, Ohio, pp. 215-226, December 6-8, 1989.36.M.K. Alam, J.S. Gunasekera, A.F. Ali, and K. Singh, Transport Phenomena in Porosity Formation During Solidification of Castings, 5th AIAA/ASME Thermophysics and

51、 Heat Transfer Conference, Transport Phenomena in Materials Processing, Edited by: M. Charmichi, M.K. Chyu, Y. Joshi, and S.M. Walsh, ASME/HTD-Vol. 133, June 1990.37.A.F. Ali, A. Rathinavelu, and J.S. Gunasekera, Analytical Modeling of the Pack Rolling Process, Transactions of the North American Man

52、ufacturing Research Institution of SME, May 1991.38.J.S. Gunasekera and Y.J. Huang, Development of a Coupled System for the Design of Extrusion dies and Processes, Proc. 5th Intl. Aluminum Extrusion Technology Seminar, Vol. 1, Chicago, May 1992, pp. 305-318.39.J.S. Gunasekera, Development of a Const

53、itutive Model for Mushy (Semi-Solid) Materials, 2nd International Conference on Semi-Solid Processing of Alloys and Composites, MIT, 1992.40.I. Osio and J.S. Gunasekera, The Use of Finite Element Analysis for Robust Optimization of Shape Rolling, ICES92, International Conference on Computational Eng

54、ineering Science, Dec. 17-22, 199241.J.S. Gunasekera and A.F. Ali, Design and Analysis of Rolling Processes, 1st Intl. Conf. on Modeling of Metal Rolling Processes, Imperial College, London, UK, 21-23 Sept. 1993.42.C.E. Fischer and J.S. Gunasekera, Development of a Practical Software Tool for the De

55、sign of Rolls for Near Net Shape Profile Rolling, SME-NAMRI, Tech. Paper, 1994, pp. 7-10.43.R. Anbajagane, J.S. Gunasekera and C.A. Vassiliadis, Intelligent Method for the Design, Analysis and Control of a Metal Forming Process, Proc. The First World Congress on INTELLIGENT MANUFACTURING, Vol. I, Pu

56、erto Rico, Feb. 13-17, 1995, pp. 262-7044. Z. Jia and J.S. Gunasekera, Computer Simulation of Hollow Cold Extrusion and Drawing Using 3D-FEM, SME-NAMRC, pp. 127- , 199545. J.S. Gunasekera, The Use of Modeling and Simulation in the Design of Net Shape manufacturing Processes, Proc. Intl Conf, IASTED,

57、 Colomobo, Sri Lanka, 199546.M. Dehghani and J.S. Gunasekera, Residual Stresses in Bi-Metallic Co-Extruded Products, Proc. of the 1996 Engineering Systems Design and Analysis Conference, Montpellier, France, Vol. 3, pp. 159-168, 1996 47.Z. Jia, J.S. Gunasekera, M. Dehghani and A.F. Ali, Simulation of hydraulic Expansion of Thin-Walled Tubes Using the Elastic-Plastic Finite Element Method, Proc. of the 1996 Engineering Systems Design and Analysis Conference, Montpellier, France, Vol. 3, pp. 169-174, 1996 48.J.S. Gunasekera and A.F. Ali, Design of