版权说明:本文档由用户提供并上传,收益归属内容提供方,若内容存在侵权,请进行举报或认领
文档简介
1、 Windows and external glazed doors in buildings建筑中的窗户和外门 PREFACE 前言This Standard was prepared by the Joint Standards Australia/Standards New ZealandCommittee BD-021, Doors and Windows, to supersede, AS 20471999, Windows inbuildings. After allowing sufficient time for adjustment (nominally 12 months
2、frompublication), the superseded document will be withdrawn.本项标准是由澳洲标准协会,新西兰标准协会联合出版。在建筑行业,门窗-021委员会取代了门窗2047-1999,在留出了足够的时间调整之后,替代的文件将被撤回。After consultation with stakeholders in both countries, Standards Australia and StandardsNew Zealand decided to develop this Standard as an Australian Standard r
3、ather than anAustralian/New Zealand Standard.作为息息相关的两个国家,澳洲标准协会和新西兰标准协会决定开发一种标准作为澳洲标准,而不是澳洲新西兰标准。 The objective of this Standard is to provide window designers and manufacturers with ageneric requirement for windows in buildings, setting out the performance requirements andspecifications in the desi
4、gn and manufacture of all windows, regardless of materials.本标准的目的是提供门窗设计师和制造商在建筑行业对门窗有一个一定的规范要求。不仅是对材料,还设置了对门窗性能要求,以及在设计和生产上的明细要求, This edition differs from the previous edition as follows:此版本一下几点不同于以前版本的地方:(a) Hinged, pivot and bi-fold doors have been added to the scope of the Standard.(b) Wind pre
5、ssures for housing, including cyclonic regions and corner conditions, havebeen updated to ensure alignment with AS 4055, Wind loads for housing.(c) The deflection/span ratio for housing and residential buildings has been changed toalign with the new lower serviceability limit state wind pressures.(d
6、) Additional guidance is given for the extrapolation of test results to larger sizewindows and the substitution of structural members and components.(e) Updated requirements for windows made from unplasticized PVC (uPVC).(f) The guide to wind pressures (Appendix A) has been revised to ensure alignme
7、nt withAS 1170.2.(g) Appendix B (Environmental considerations) has been included to ensure alignmentwith current Standards.A 铰接,枢轴和双折门已被添加到该标准的范围。B 房屋风压,包括气旋区域和偏僻地区的条件下,都已经被更新,以确保与AS4055,房屋承受风力一致。C 房屋和住宅楼的偏转/跨比已更改为新的较低极限状态风压D 针对大尺寸门窗和结构部件的测试结果都给出了指导性建议E更新了对门窗的要求F AS1170.2.为了确保和AS1170.2标准保持一致。对风压指南(附
8、录)进行了修订G为了确保与当前的标准一致,已将附录B环境因素列入 .In this Standard, statements expressed in mandatory terms in notes to tables and figures aredeemed to be an integral part of the Standard.The terms normative and informative have been used in this Standard to define the application of the appendix to which they appl
9、y. A normative appendix is an integral partof a Standard, whereas an informative appendix is only for information and guidance.在此标准,以表格和图形特别说明的被认为是标准的一个组成部分,“规范”和“信息”这个两个条款已经使用本标准来定义它们在适用的附录中的应用。“规范”附录是标准的一个组成部分,而一个“信息”附录仅提供信息和指导目录CONTENTS 第一节:范围和综述SCOPE AND GENERAL1.1 范围SCOPE. 51.2 规范性参考 NORMATIVE
10、REFERENCES. 61.3定义DEFINITIONS. 8 第二节 性能PERFORMANCE2.1综述GENERAL . 122.2 大气环境ATMOSPHERIC ENVIRONMENTS . 122.3窗的性能WINDOW PERFORMANCE . 122.4 更小或更大尺寸的产品的验证VERIFICATION OF SMALLER OR LARGER SIZE PRODUCTS. 172.5使用和评定窗的耦合系统USE AND RATING OF WINDOW COUPLING SYSTEMS . 192.6 替代物SUBSTITUTION . 19 第三节 框架及表面材料FR
11、AMING AND FINISHES3.1铝合金窗ALUMINIUM WINDOWS . 213.2实木窗.TIMBER WINDOWS. 223.3UPVC窗UNPLASTICIZED PVC (UPVC) WINDOWS . 253.4其他材料的窗WINDOWS OF OTHER MATERIALS . . 27 第四节 玻璃GLAZING4.1综述GENERAL . 284.2玻璃GLASS . 284.3玻璃材料GLAZING MATERIALS . 28 第五节:部件配置COMPONENTS5.1 五金HARDWARE . 295.2 紧固件 FASTENERS . 295.3耐候性
12、WEATHERPROOFING . 295.4安全性SECURITY . 305.5 锚泊设备ANCHORING DEVICES. 30第六节 建筑CONSTRUCTION6.1综述GENERAL . 316.2允许偏差 TOLERANCES. 316.3接缝 JOINTS. 316.4 玻璃GLAZING . 316.5窗侧REVEAL LININGS . 316.6防水板FLASHINGS . 31第七节 安装INSTALLATION7.1窗的选择 WINDOW SELECTION. 327.2安装INSTALLATION . 327.3 热与结构运动THERMAL AND STRUCTU
13、RAL MOVEMENT . 347.4 现场维护ON-SITE CARE . 34第八节 标志和证书LABELLING AND CERTIFICATE8.1综述GENERAL . 358.2 标志LABELLING . 358.3 证书CERTIFICATE. 35附录APPENDICESA风压设计的指导GUIDE TO DESIGN WIND PRESSURE. 36 B环境方面的考虑ENVIRONMENTAL CONSIDERATIONS . 41 C 窗的评定和风压设计的设定NOMINATION OF WINDOW RATINGS AND DESIGN WIND PRESSURE .
14、44 D铝合金表面光洁度SURFACE FINISH FOR ALUMINIUM. 45E现场维护ON-SITE CARE. 47 F一般实木窗GENERIC TIMBER WINDOWS . 48 G一般窗测试结果GENERIC WINDOWS TEST RESULTS. 65参考文献BIBLIOGRAPHY. 66 澳大利亚标准澳大利亚建筑门窗玻璃标准S E C T I O N 1 S C O P E A N D G E N E R A L第一节范围和综述1.1范围SCOPEThis Standard specifies requirements, materials, construct
15、ion, installation and glazing forExternal 本标准规定的要求,材料,施工,安装和玻璃窗都是针对外部的(a) windows;(b) sliding and swinging glazed doors, including French and bi-fold doors;(c) adjustable louvres;(d) shopfronts; and(e) window walls with one-piece framing elements. A窗B推拉,弹簧玻璃门,包括法式对开门和双折门。C可调百叶D店面E窗墙及一扇窗框架NOTE: Windo
16、w walls do not include curtain walls using stacked or vertically spliced framingsystems, manufactured from any material and installed in external walls of all classes ofBuildings.注意:窗墙不包括堆叠或垂直框架拼接的幕墙,也不包括 由任何材料制成,并安装在建筑物的各阶层的外墙。Throughout this Standard, the term window(s) means window of any type, i
17、ncludinglouvre(s) and glazed door(s).NOTES:1 The window ratings or classifications differ from previous glass and window Standards due tothe more accurate evaluation of the effect of wind conditions. They are based on eitherAS 1170.2, or the specific wind loading code developed for housing, AS 4055.
18、2 For information on wind loads applicable to windows covered by this Standard,see Appendix A.3 Prefabricated bay windows that incorporate sloped glass are classified as windows in externalwalls.4 For the performance specifications of building facades, see AS/NZS 4284. Conformance tothe requirements
19、 of AS/NZS 4284 will be deemed to satisfy the requirements of this Standard,provided the windows have been tested to AS 4420.3 (operating force test).5 The following are not covered by this Standard but should be checked with the NationalConstruction Code (NCC) for compliance requirements:(a) Intern
20、al doors.(b) Revolving glazed doors.(c) Fixed louvres.(d) Skylights and roof lights and windows in other than the vertical plane.(e) Windows in greenhouses and agricultural buildings.(f) Frameless sliding and swinging doors.(g) Windows constructed on site and architectural one-off windows, which are
21、 not designtested.(h) Second-hand windows, re-used windows or recycled windows.(i) Heritage windows for heritage buildings, as defined by the relevant State or TerritoryAuthority.贯穿本标准中,术语“窗”是指任何类型的窗,包括百叶窗和玻璃门。注意:1他们无论是根据 1170.2 还是专门为房屋研发的特定风压承受力标准4055.窗口的评分或分类与以前玻璃和窗户的标准不同的是对风力条件的影响的有了更准确的评价。2对于适用于
22、本标准所涵盖的窗户上的风荷载的信息,请参阅附录.3预制窗台,倾斜的玻璃被列为外墙窗户4对于建筑外立面的性能规格,请参阅/ 4284.符合的/ 4284,将被视为符合本标准,提供了窗要已经过了4420.3测试(操作力试验)。5下面的不属于本标准,但应检查是否符合全国建筑代号()的合规性要求A室内门B旋转玻璃门C 固定百叶 .D天花板以及垂直平面以外的窗E.绿色节能窗和农业建筑F无框推拉和弹簧门G现场和一次性修建的建筑窗户,不在测试范围内H二手窗和重复利用的窗I由相关国家或地区的权威定义的 文物遗产窗。 1.2 引用标准NORMATIVE REFERENCESThe following are t
23、he normative documents referenced in this Standard:NOTE: Documents referenced for informative purposes are listed in the Bibliography.以下是本标准中引用的规范性文件注意:信息目的引用文档中列出的参考书目1.3 定义DEFINITIONSFor the purpose of this Standard, the definitions given in AS/NZS 4491 and those belowApply.对于这个标准的目的,在AS/NZS 4491给
24、出的定义中及以下内容都适用。1.3.1 空调Air conditioningFor the purpose of energy efficiency, a service that actively cools or heats a space within abuilding in order to provide a suitable environment for the building occupants, but does notinclude process needs, such as temperature or humidity control, as occurs in
25、cold rooms andhot rooms.为了提高能源效率,即积极地提高冷却或内加热的空间内的服务以提供一个合适的环境的建筑物的居住者,但不包括流程的需求,如在寒冷或者热的房间里温度或湿度的控制。1.3.2 空气渗透 Air infiltration The flow of air through a window or door that aids in determining the acoustic and thermalperformance.空气通过窗户或门的流动是有助于确定所述声学和热性能.NOTE: Products with a low airflow rate will
26、 perform better for noise and energy; therefore, theyshould provide a higher comfort level than those with a high flow rate. 注:具有低气流速率的产品隔音效果和节能效果更好;因此,它们应在高流速的情况下提供更高的舒适度1.3.3 定制窗建筑窗Architectural one-off windowA window designed to suit one specific installation in a building.窗的独特设计应该能够很好的安装在建筑物上NOT
27、E: The sections and components used to make the window should be unique to thatInstallation.注意:在安装的时候,每一部分和部件都使这个窗是独一无二的。1.3.4 幕墙Curtain wallThe amount of relative displacement of the structural components in a window.NOTE: The amount of deflection is controlled for several reasons, such as the appe
28、arance ofmovement to the end user, the rigidity of joint and sealing of those joints, and the adequatesupport of glass to prevent premature failure.非承重壁的金属部分,玻璃和填充板,它直接在建筑物的结构上进行 注:幕墙在现代高层办公楼比较广泛使用1.3.5 偏差Deflection The amount of relative displacement of the structural components in a window.在一个窗中的结
29、构部件的相对位移量。 NOTE: The amount of deflection is controlled for several reasons, such as the appearance ofmovement to the end user, the rigidity of joint and sealing of those joints, and the adequatesupport of glass to prevent premature failure.注意:偏移量可以被控制的几个原因,如外观运动到最终用户,联合这些接头的刚性和密封性,以及防止提前失效,起支撑作用的玻璃
30、。1.3.6 门DoorA sash of a size suitable for use as access through walls.每一扇的尺寸正好适合洞口的尺寸 1.3.7 现场Exposed site A site where one or more of the following AS 4055 site conditions are met:(a) Terrain category TC2 or less.(b) Topographic class T3 or greater.(c) No shielding.以下一种或者更多需要符合AS4055 A地形种类为2或者更低 B地
31、形为3级或者更高 C无保护层NOTE: Any site other than defined above is considered non-exposed.上述定义之外的还没有被发现1.3.8 开窗方式Fenestration ,The arrangement of windows and other openings on the external walls of buildings,especially the facade.建筑物的外墙,尤其是正面的窗口和其它开口的布置1.3.9 边FinA piece of glass positioned to provide lateral
32、support.Acc提供侧向支撑的一块玻璃。1.3.10 固定 Fixing Any item that is used to secure members of a window assembly to each other, secure anitem of hardware to a window member or secure a completed window assembly into thebuilding structure.用于固定一个窗户任何相关联的配件项目,都要确保窗户的每一个五金件或者确保任何窗户的一个配件都要很好的和建筑物融入一体。1.3.11 防水板 Flas
33、hing An impervious membrane installed in such a manner as to prevent ingress of water into thebuilding.NOTE: Flashing includes a waterproof strip barrier around an opening in a wall, at a roof junctionor at a roof penetration to prevent the ingress of water to the inner parts of a building. In somei
34、nstances the flashing can act as a damp-proof course.以防止水进入到建筑物,如安装在这样的方式的不透膜。注:防水板包括围绕一开口的壁,在一个屋顶结或在屋顶穿透防水条屏障,以防止水进入到建筑物的内部零件。在一些情况下,防水板可以充当防潮层1.3.12 框 Frame That part of a window assembly surrounding the sashes or fixed glazing, manufactured fromtimber, metal, glass, or other durable material or c
35、ombination of materials, such as glassfins and structural sealant forming part of the assembly of a glazed panel and supporting thefull length of all the edges of the glass.NOTE: Butt-jointed glass panels that are not in the same plane may be deemed to satisfy therequirements for frames.框是窗扇或者固定玻璃周围
36、的那部分,由木材,金属,玻璃,或其它耐用材料或材料制成,例如玻璃翅片和一个玻璃面板的组件,加上密封剂,形成部组合制造的窗组件的一部分和支持全长玻璃全部边缘。注:对接玻璃面板,不会在同一平面上被认为满足框的要求1.3.13无框Frameless (panels) Without framed edges.没有框架1.3.14 玻璃Glass A hard, brittle, amorphous substance produced by fusion and usually consisting of mutuallydissolved silica or silicates that also
37、 contain soda and lime, and may be transparent,translucent or opaque.由 硬,脆的,无定形物质由融合产生的,并且通常由相互溶解硅或硅酸盐,也含有钠和石灰,并且是透明的1.3.15 玻璃 定义如下Glazing(a) The securing of glass in prepared openings in windows, door panels, partitions andthe like.(b) Glass or plastics glazing sheet material for installation into
38、a building.A窗户制备开孔,利用门板,隔板等的固定玻璃。B安装在建筑商的玻璃或者塑料玻璃1.3.16 玻璃隔条 Glazing bar A member that is added to a standard window construction to change the appearance of thewindow.NOTE: The glass is individually glazed. The bar may also be clipped or stuck onto both faces ofthe glass. Also known as colonial bar
39、s or federation bars.添加到玻璃内部,改变玻璃外观的配件 注:玻璃单独是玻璃。隔条也可夹持或粘贴到玻璃的两面。也被称为夹层隔条。1.3.17 玻璃垫片Glazing gasket Plastic or synthetic rubber members, used between the glass and the frame or the glass andthe bead.塑料或合成橡胶构件,放在玻璃和框架或玻璃和框之间的东西。1.3.18 五金Hardware Equipment used in the opening, operating, closing, lock
40、ing and stopping of windows.用于开启设备,操作,关闭,锁定和停止窗的配置。1.3.19顶部HeadThe top horizontal framing member of a window assembly.保持窗顶部水平的框架构件1.3.20 侧壁JambA vertical side-framing member垂直侧框架构件1.3.21 光线Light See window light.窗户光线1.3.22 百叶Louvre A window unit comprising a series of blades of glass or other materi
41、al lapping each other.一个窗包括一系列玻璃或其它材料的叶片的搭接一起。1.3.23 掩合门梃 Meeting stiles Vertical intermediate sash members that meet when the window is closed such that theycombine to act in unison.当窗关闭的时候,一种垂直的中间窗框构件会使他们结合起来,保持一致1.3.24 上下窗窗框横档Meeting rails Horizontal intermediate sash members that meet when the w
42、indow is closed such that theycombine to act in unison.当窗口关闭,这样它们结合起来,保持水平的中间窗框构件。1.3.25 中梃Mullion A vertical intermediate framing member of a window frame or opening that is jointed intothe head and sill, and separates the lights.连接窗开启或框架顶部和门槛,将两部分分开的垂直中间框部件。1.3.26 - 多扇窗Multi-light window A window
43、incorporating more than one opening or fixed light, or both, within one perimeterframe, as low lights, high lights or side lights. 一个窗口有多于一个开启或固定,或这两者,在一个周边框,如低扇,高扇或侧扇。1.3.27 幕墙Panel wall A non-loadbearing window wall forming an infill between columns or within a frame andwholly supported at each st
44、orey by a beam, slab or structural projection.由结构框架与镶嵌板材组成,不承担主体结构载荷与作用的建筑围护结构 1.3.28 (Pa)帕斯卡Pascal (Pa) The pressure or stress that arises when a force of one newton is applied uniformly over anarea of one square metre.一平方米的面积上受到的压力是一牛顿时所产生的压强为为帕斯卡1.3.29 门窗口筒子板Reveal lining The lining attached to t
45、he window unit frame, which is used to position and mount thewindow to the structure.附着到窗的框架上,它是用来定位和安装窗的结构1.3.30 扇SashThe separate frame, to a window or door, carrying the glass, which may be fixed(inoperable) or movable (operable).在一个窗或门单独的扇里,承载着玻璃,或固定或开启。1.3.31 截面SectionAn extruded or profiled member.一个挤压或异形件1.3.32 窗台Sill The bottom horizontal framing member of a window assembly.一个窗的底部水平框架构件1.3.33 门梃Stile 一个窗框的垂直侧面构件A vertical side member of a sash.1.3.34 结构部件Structural mem
温馨提示
- 1. 本站所有资源如无特殊说明,都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
- 2. 本站的文档不包含任何第三方提供的附件图纸等,如果需要附件,请联系上传者。文件的所有权益归上传用户所有。
- 3. 本站RAR压缩包中若带图纸,网页内容里面会有图纸预览,若没有图纸预览就没有图纸。
- 4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
- 5. 人人文库网仅提供信息存储空间,仅对用户上传内容的表现方式做保护处理,对用户上传分享的文档内容本身不做任何修改或编辑,并不能对任何下载内容负责。
- 6. 下载文件中如有侵权或不适当内容,请与我们联系,我们立即纠正。
- 7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
最新文档
- 初中八年级地理教学设计:中国工农业与交通运输业区域协同发展探究
- 小学五年级信息技术探秘鸡兔同笼问笼教学设计
- 高中一年级美术教学设计 漂亮是美术鉴赏的标准吗 艺术美与形式美的深度赏析
- 小学六年级美术《美丽家园》第二课时教学设计
- 掘金智能土壤墒情监测仪细分赛道:核心瓶颈、壁垒与盈利模式
- 双碳约束下智能POS能否成为传统零售的第二增长曲线
- 美容美发店美容顾问服务满意度与销售业绩绩效考核指标表
- 家庭停电备用电源配置指南
- 2026年库存调拨处理通知(3篇)范文
- 物流仓储成本控制与管理指导书
- 2026年电信外包转正考试试题
- 入额法官责任制度
- 木头下脚料收购协议书
- 贵州国企招聘2025贵州贵阳产业发展控股集团有限公司招聘27人笔试历年参考题库附带答案详解
- 铁路概论课件
- 患者拒绝或放弃医学治疗(或抢救)告知书
- 保险消费者权益保护培训
- DGTJ08-2248-2017 等厚度水泥土搅拌墙技术规程
- 2026届山东省聊城莘县联考化学九年级第一学期期中达标检测试题含解析
- 绒用山羊饲养管理技术
- (高清版)DB11∕T 1557-2025 能效对标实施规范
评论
0/150
提交评论