连杆平行度测量仪毕业设计摘要目录

毕业设计论文网 : QQ:306826066摘 要连杆是汽车发动机的主要传力构件之一，常处于高速运动状态，因此要求与其它零件间具有较高的配合精度。因而连杆检测成了生产中频繁而又不可缺少的环节。连杆平行度测量仪是专门为检测汽车连杆而设计的专用测量工具，其结构简单、测量精度高。本设计是由机械系统设计和控制系统的设计所组成。包括齿轮传动的设计及选择，滚珠丝杠的设计及选择，步进电机的选择和装置中机械系统的设计，有关测试系统的控制设计及选择。我的设计内容主要是机械部分的设计。关键词： 连杆 平行度 检测毕业设计论文网 : QQ:306826066AbstractThe connecting rod is one of motor car engine main power transmission components, often being at the high speed state of motion, therefore, which requests the higher grade of fit with other components. Thus the connecting rod is examined in the production to be frequent and the also essential link. The connecting rod parallelism measuring instrument is specially for examines for measuring tool which the automobile connecting rod design, its structure is simple, the measuring accuracy is high. This design is composed by the mechanical system design and the control system design, which includes the gear drive design and the choice, the ball bearing guide screw design and chooses, motor machine choice and installment mechanical system design, relating test system control design and choice. My design content mainly focuses on the machine part design.Key words：Connecting rod parallelism examination毕业设计论文网 : QQ:3068260664目 录摘 要IAbstract II第 1 章 绪论 1第 2 章 机电一体化技术简介 32.1 机电一体化技术简介 32.2 机电一体化技术体系 32.3 机电一体化的发展前景 32.4 连杆平行度测量仪的简介 42.5 Pro/ENGINEER 产品介绍4第 3 章 连杆平行度测量仪机械部分的总体设计 93.1 进给运动的要求 93.2 滚珠丝杠的选择 93.3 齿轮传动的设计计算143.4 步进电机的选择163.5 液压夹具的设计19第 4 章 连杆平行度测量仪中的微机应用及其接口技术234.1 测量仪中主控芯片 8088 介绍 234.2 测量仪中的接口技术 24第 5 章 传感器的选择及测量原理345.1 传感器的选择及测量方法34