ISO-8655-6-CORR-1-2008.pdf

ics 17.060 ref. no. iso 8655-6:2002/cor.1:2008(e) iso 2008 all rights reserved published in switzerland international standard iso 8655-6:2002 technical corrigendum 1 published 2008-12-15 international organization for standardization organisation internationale de normalisation piston-operated volumetric apparatus part 6: gravimetric methods for the determination of measurement error technical corrigendum 1 appareils volumtriques piston partie 6: mthodes gravimtriques pour la dtermination de lerreur de mesure rectificatif technique 1 technical corrigendum 1 to iso 8655-6:2002 was prepared by technical committee iso/tc 48, laboratory equipment, subcommittee sc 6, laboratory and volumetric ware. page iv, foreword add the following part to the list of parts: part 7: non-gravimetric methods for the assessment of equipment performance delete “the following part is under preparation:” and the former title of part 7. page 1, scope in the note, replace the third sentence with the following: “alternative test methods such as photometric and titrimetric methods are given in iso 8655-7.” copyright international organization for standardization provided by ihs under license with iso licensee=boeing co/5910770001 not for resale, 01/31/2009 21:37:58 mstno reproduction or networking permitted without license from ihs -,-,- iso 8655-6:2002/cor.1:2008(e) 2 iso 2008 all rights reserved page 1, clause 2 replace the reference to oiml r 76-1:1992 with the following: oiml r 76-1, non-automatic weighing instruments part 1: metrological and technical requirements tests page 9, 8.3 in the sentence below equation (2), replace “which is 20 c” with “which is 20 c or 27 c”. page 10, clause 9 in list item b), replace “(20 c)” with “(20 c or 27 c)” to give the following: b) basis of adjustment (ex) or (in) and reference temperature (20 c or 27 c); copyright international organization for standardization provided by ihs under license with iso licensee=boeing co/5910770001 not f