首页 人人文库网 > 图纸下载 > 毕业设计 > 肥皂盒上盖的注塑模设计【全套含CAD图纸、三维、视频】
EjectorProcedureFile.txt

肥皂盒上盖的注塑模设计【全套含CAD图纸、三维、视频】

收藏

资源目录
跳过导航链接。
肥皂盒上盖的注塑模设计【全套含CAD图纸、三维、视频】.zip
设计说明书.doc---(点击预览)
开题报告.doc---(点击预览)
任务书.doc---(点击预览)
三维SW
project.txt---(点击预览)
EjectorProcedureFile.txt---(点击预览)
CutProcedureFile.txt---(点击预览)
BOM.xls---(点击预览)
17-screw_cut.txt---(点击预览)
17-layout.txt---(点击预览)
17-ejector_cut.txt---(点击预览)
17-component_cut.txt---(点击预览)
Drawings
盖.SLDDRW
moldbase
MB Whiter A Type_2.xls---(点击预览)
MB Whiter A Type.xls---(点击预览)
10M-RPN 复位杆imoldprj.SLDPRT
17-a01_板.SLDPRT
17-a02_板.SLDPRT
17-a1_板.SLDPRT
17-a2_板.SLDPRT
17-a3_板.SLDPRT
17-a_板.SLDPRT
17-B01_板.SLDPRT
17-b02_板.SLDPRT
17-B1_板.SLDPRT
17-b2_板.SLDPRT
17-b_板.SLDPRT
17-c_板.SLDPRT
17-c_板2.SLDPRT
17-MB Whiter A Type.SLDASM
17-SHC_上_mm.SLDPRT
17-SHC_下_mm.SLDPRT
17-SHC_顶杆1_mm.SLDPRT
17-SHC_顶杆2_mm.SLDPRT
17-动模.SLDASM
17-动模固定板.SLDPRT
17-定模.SLDASM
17-定模固定板.SLDPRT
17-导杆.SLDPRT
17-导杆套1.SLDPRT
17-推出固定板1.SLDPRT
17-推出固定板2.SLDPRT
17-推出板1.SLDPRT
17-推出板2.SLDPRT
17-支撑板.SLDPRT
模具三维
project.txt---(点击预览)
EjectorProcedureFile.txt---(点击预览)
CutProcedureFile.txt---(点击预览)
BOM.xls---(点击预览)
00-screw_cut.txt---(点击预览)
00-layout.txt---(点击预览)
00-ejector_cut.txt---(点击预览)
00-component_cut.txt---(点击预览)
Drawings
上盖.SLDDRW
moldbase
MB Whiter A Type_2.xls---(点击预览)
MB Whiter A Type.xls---(点击预览)
00-a01_板.SLDPRT
00-a02_板.SLDPRT
00-a1_板.SLDPRT
00-a2_板.SLDPRT
00-a3_板.SLDPRT
00-a_板.SLDPRT
00-B01_板.SLDPRT
00-b02_板.SLDPRT
00-B1_板.SLDPRT
00-b2_板.SLDPRT
00-b_板.SLDPRT
00-c_板.SLDPRT
00-c_板2.SLDPRT
00-MB Whiter A Type.SLDASM
00-SHC_上_mm.SLDPRT
00-SHC_下_mm.SLDPRT
00-SHC_顶杆1_mm.SLDPRT
00-SHC_顶杆2_mm.SLDPRT
00-动模.SLDASM
00-动模固定板.SLDPRT
00-定模.SLDASM
00-定模固定板.SLDPRT
00-导杆.SLDPRT
00-导杆套1.SLDPRT
00-推出固定板1.SLDPRT
00-推出固定板2.SLDPRT
00-推出板1.SLDPRT
00-推出板2.SLDPRT
00-支撑板.SLDPRT
00-screwpocketing.mdb
00-侧浇口1.SLDPRT
00-侧浇口2.SLDPRT
00-侧浇口3.SLDPRT
00-冷却水路.SLDASM
00-水管1.SLDPRT
00-水管10.SLDPRT
00-水管2.SLDPRT
00-水管3.SLDPRT
00-水管4.SLDPRT
00-水管5.SLDPRT
00-水管6.SLDPRT
00-水管7.SLDPRT
00-水管8.SLDPRT
00-水管9.SLDPRT
00-流道1.SLDPRT
00-浇注系统.SLDASM
00-肥皂盒上盖 衍生件_型腔.SLDPRT
00-肥皂盒上盖 衍生件_型芯.SLDPRT
00-肥皂盒上盖 衍生件_型芯型腔组件.SLDASM
00-部件.SLDASM
00-顶杆.SLDASM
00-顶杆_1.SLDPRT
00-顶杆_2.SLDPRT
00-顶杆_3.SLDPRT
00-顶杆_4.SLDPRT
asmdrawing.log
AZ Sprue Puller Bushings.SLDPRT
ccb.log
feed.log
H80-00 Nipple.SLDPRT
Lifter_Pocketing.dat
Locating Ring R6012.SLDPRT
Locating Ring R90.SLDPRT
MBCompsToSuppress.dat
Moldbase_Journal.dat
Moldbase_Journal2.dat
Moldbase_Journal3.dat
Moldbase_Journal4_Eqn.dat
project.log
SHC_mm.SLDPRT
Slider_Pocketing.dat
Sprue Bushings.SLDPRT
SuppressPlates.dat
TieBar.DAT
tools.log
_IMOLD-Temp.SLDPRT
上盖.imoldprj
上盖.mdb
上盖.SLDASM
上盖.SLDDRW
上盖_Options.mdb
智能点子.SLDPRT
肥皂盒上盖 衍生件.SLDPRT
肥皂盒上盖.SLDPRT
零件1.SLDPRT
零件2.SLDPRT
零件3.SLDPRT
零件4.SLDPRT
模具图三维
project.txt---(点击预览)
EjectorProcedureFile.txt---(点击预览)
CutProcedureFile.txt---(点击预览)
BOM.xls---(点击预览)
17-screw_cut.txt---(点击预览)
17-layout.txt---(点击预览)
17-ejector_cut.txt---(点击预览)
17-component_cut.txt---(点击预览)
Drawings
盖.SLDDRW
moldbase
MB Whiter A Type_2.xls---(点击预览)
MB Whiter A Type.xls---(点击预览)
17-a01_板.SLDPRT
17-a02_板.SLDPRT
17-a1_板.SLDPRT
17-a2_板.SLDPRT
17-a3_板.SLDPRT
17-a_板.SLDPRT
17-B01_板.SLDPRT
17-b02_板.SLDPRT
17-B1_板.SLDPRT
17-b2_板.SLDPRT
17-b_板.SLDPRT
17-c_板.SLDPRT
17-c_板2.SLDPRT
17-MB Whiter A Type.SLDASM
17-SHC_上_mm.SLDPRT
17-SHC_下_mm.SLDPRT
17-SHC_顶杆1_mm.SLDPRT
17-SHC_顶杆2_mm.SLDPRT
17-动模.SLDASM
17-动模固定板.SLDPRT
17-定模.SLDASM
17-定模固定板.SLDPRT
17-导杆.SLDPRT
17-导杆套1.SLDPRT
17-推出固定板1.SLDPRT
17-推出固定板2.SLDPRT
17-推出板1.SLDPRT
17-推出板2.SLDPRT
17-支撑板.SLDPRT
17-screwpocketing.mdb
17-上盖1 衍生件_型腔.SLDPRT
17-上盖1 衍生件_型芯.SLDPRT
17-上盖1 衍生件_型芯型腔组件.SLDASM
17-侧浇口1.SLDPRT
17-侧浇口2.SLDPRT
17-冷却水路.SLDASM
17-水管1.SLDPRT
17-水管2.SLDPRT
17-水管3.SLDPRT
17-水管4.SLDPRT
17-水管5.SLDPRT
17-水管6.SLDPRT
17-水管7.SLDPRT
17-水管8.SLDPRT
17-流道1.SLDPRT
17-浇注系统.SLDASM
17-部件.SLDASM
17-顶杆.SLDASM
17-顶杆_1.SLDPRT
17-顶杆_2.SLDPRT
17-顶杆_3.SLDPRT
17-顶杆_4.SLDPRT
asmdrawing.log
AZ Sprue Puller Bushings.SLDPRT
AZ Sprue Puller Bushings_R1.SLDPRT
ccb.log
feed.log
H80-00 Nipple.SLDPRT
Locating Ring R6012.SLDPRT
MBCompsToSuppress.dat
Moldbase_Journal.dat
Moldbase_Journal2.dat
Moldbase_Journal3.dat
Moldbase_Journal4_Eqn.dat
project.log
SHC_mm.SLDPRT
Sprue Bushings.SLDPRT
SuppressPlates.dat
TieBar.DAT
tools.log
_IMOLD-Temp.SLDPRT
上盖1 衍生件.SLDPRT
上盖1.SLDPRT
智能点子.SLDPRT
盖.imoldprj
盖.mdb
盖.SLDASM
盖.STEP
盖_Options.mdb
10--弹簧 2.SLDPRT
10FHS_mm.SLDPRT
10M-RPN 复位杆imoldprj.SLDPRT
10SHC_mm.SLDPRT
17-screwpocketing.mdb
17-上盖1 衍生件_型腔.SLDPRT
17-上盖1 衍生件_型芯.SLDPRT
17-上盖1 衍生件_型芯型腔组件.SLDASM
17-侧浇口1.SLDPRT
17-侧浇口2.SLDPRT
17-冷却水路.SLDASM
17-水管1.SLDPRT
17-水管2.SLDPRT
17-水管3.SLDPRT
17-水管4.SLDPRT
17-水管5.SLDPRT
17-水管6.SLDPRT
17-水管7.SLDPRT
17-水管8.SLDPRT
17-流道1.SLDPRT
17-浇注系统.SLDASM
17-部件.SLDASM
17-顶杆.SLDASM
17-顶杆_1.SLDPRT
17-顶杆_2.SLDPRT
17-顶杆_3.SLDPRT
17-顶杆_4.SLDPRT
asmdrawing.log
AZ Sprue Puller Bushings.SLDPRT
AZ Sprue Puller Bushings_R1.SLDPRT
ccb.log
feed.log
H80-00 Nipple.SLDPRT
Locating Ring R6012.SLDPRT
MBCompsToSuppress.dat
Moldbase_Journal.dat
Moldbase_Journal2.dat
Moldbase_Journal3.dat
Moldbase_Journal4_Eqn.dat
project.log
SHC_mm.SLDPRT
Sprue Bushings.SLDPRT
SuppressPlates.dat
TieBar.DAT
tools.log
_IMOLD-Temp.SLDPRT
上盖1 衍生件.SLDPRT
上盖1.SLDPRT
智能点子.SLDPRT
盖.imoldprj
盖.mdb
盖.SLDASM
盖.SLDDRW
盖_Options.mdb
三维图片
111.png---(点击预览)
外文翻译
外文原文.pdf---(点击预览)
中文译文.doc---(点击预览)
上模座板A1.dwg
下模座板A2.dwg
仿真视频.wmv
动模板A1.dwg
垫块A2.dwg
塑件图A3.dwg
复位杆A4.dwg
定模板A1.dwg
导套A3.dwg
导柱A3.dwg
拉料杆A4.dwg
推杆A3.dwg
推杆固定板A2.dwg
推板A2.dwg
浇口套A3.dwg
装配图A0.dwg
压缩包内文档预览：
预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图 预览图
编号：12792938    类型：共享资源    大小：43.05MB    格式：ZIP    上传时间：2019-01-06 上传人：机****料 IP属地：河南
50
积分
举报
举报 版权申诉
版权申诉 word格式文档无特别注明外均可编辑修改；预览文档经过压缩，下载后原文更清晰！ 立即下载
关 键 词：
全套含CAD图纸、三维、视频 肥皂盒 注塑 设计 全套 cad 图纸 三维 视频
资源描述：


内容简介：
21:42:58, 13, 2012 - GetTopInformation() E:00EjectorProcedureFile.txt ReadResource E:00.SLDASM 21:42:59, 13, 2012 - GetTopInformation() 21:42:59, 13, 2012 - GetImpressionInformation IsCreatePlane() Start CreateEjectorPlane() Start ER117-MB Whiter A Type-1/17-117-MB Whiter A Type Create a plane successfully. 1 Select for blanking refgeom 1 Create a plane successfully. 2 Select for blanking refgeom 2 Create a plane successfully. 3 Select for blanking refgeom 3 CreateEjectorPlane() End IsCreatePlane() End E:001 .SLDPRT E:0017-1 _.SLDPRT E:0017-1 _.SLDPRT 1 17-1 _ 17-1 _ m_Feature != NULL & g_nAdd = 1 21:43:05, 13, 2012 - GetImpressionInformation Before initializing. After initializing. Layout() Group0 GroupA Group1 Group2A Group2 Group3 Group4 Group5 InitPM() InitData ReadUnit() D:Program FilesIMOLD V8stdejectorvendor.xls m_nVendorNumber 0 ReadUnit() End ReadUnit SetChangeVendorList() SetChangeUnit() ReadModel() ReadModel() End m_nModel != -1 OnSetChangeType() GetDefaultParameter() GetDimensionList GetDimensionList() strParameterName = d1BaseSketch strParameterName = d2BaseSketch strParameterName = KBaseSketch strParameterName = RBaseSketch strParameterName = HdClrHdClr strParameterName = offsetBodyClearanceSketch strParameterName = BdClrRevolveSketch strParameterName = base_lExtrudeSketch1 strParameterName = Key_LExtrudeSketch2 strParameterName = Key_WExtrudeSketch2 strParameterName = LBaseSketch GetDimensionList() SetDimensionList SetDimensionList() ShowDrivingDimension() ShowDrivingDimension() End GetFirstDimensionValue() GetColValue strDimensionValue = 0.0469 strDimensionValue = 0.0625 strDimensionValue = 0.0781 strDimensionValue = 0.0938 strDimensionValue = 0.1094 strDimensionValue = 0.125 strDimensionValue = 0.1406 strDimensionValue = 0.1563 strDimensionValue = 0.1719 strDimensionValue = 0.1875 strDimensionValue = 0.2031 strDimensionValue = 0.2188 strDimensionValue = 0.2344 strDimensionValue = 0.25 strDimensionValue = 0.2656 strDimensionValue = 0.2813 strDimensionValue = 0.2969 strDimensionValue = 0.3125 strDimensionValue = 0.3281 strDimensionValue = 0.3438 strDimensionValue = 0.3594 strDimensionValue = 0.375 strDimensionValue = 0.4063 strDimensionValue = 0.4375 strDimensionValue = 0.4688 strDimensionValue = 0.5 strDimensionValue = 0.5625 strDimensionValue = 0.625 strDimensionValue = 0.6875 strDimensionValue = 0.75 strDimensionValue = 0.875 strDimensionValue = 1.0 OnSetChangeDimensionList1() d1 0.0469 GetFitValue m_nDrivingParaNumber ! 1 SetParameterList() GetConfigValue GetConfigValue OnSelchangeClearanceList OnSelchangeParameterList2 GetConfigValue GetPreviewParaValue GetPreviewParaValue() SetParameterList() End OnSetChangeDimensionList1() End GetFirstDimensionValue() End SetDimensionList() End GetDefaultParameter() End GetDefaultParameter GetPreviewParaName() GetPreviewParaValue() GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetPreviewParaValue() End GetPreviewParaName() End GetPreviewParaName RedrawWindow OnSetChangeType() End SetChangeUnit() End SetChangeVendorList() End SetChangeVendorList CreateTempBody ReadCurrentUserRegistry SoftwareIMOLDMetricComponents DME GetDefaultVendor SetChangeVendorList() SetChangeUnit() ReadModel() ReadModel() End m_nModel != -1 OnSetChangeType() GetDefaultParameter() GetDimensionList GetDimensionList() strParameterName = d1BaseSketch strParameterName = d2BaseSketch strParameterName = KBaseSketch strParameterName = RBaseSketch strParameterName = HdClrHdClr strParameterName = offsetBodyClearanceSketch strParameterName = BdClrRevolveSketch strParameterName = base_lExtrudeSketch1 strParameterName = Key_LExtrudeSketch2 strParameterName = Key_WExtrudeSketch2 strParameterName = LBaseSketch GetDimensionList() SetDimensionList SetDimensionList() ShowDrivingDimension() ShowDrivingDimension() End GetFirstDimensionValue() GetColValue strDimensionValue = 0.0469 strDimensionValue = 0.0625 strDimensionValue = 0.0781 strDimensionValue = 0.0938 strDimensionValue = 0.1094 strDimensionValue = 0.125 strDimensionValue = 0.1406 strDimensionValue = 0.1563 strDimensionValue = 0.1719 strDimensionValue = 0.1875 strDimensionValue = 0.2031 strDimensionValue = 0.2188 strDimensionValue = 0.2344 strDimensionValue = 0.25 strDimensionValue = 0.2656 strDimensionValue = 0.2813 strDimensionValue = 0.2969 strDimensionValue = 0.3125 strDimensionValue = 0.3281 strDimensionValue = 0.3438 strDimensionValue = 0.3594 strDimensionValue = 0.375 strDimensionValue = 0.4063 strDimensionValue = 0.4375 strDimensionValue = 0.4688 strDimensionValue = 0.5 strDimensionValue = 0.5625 strDimensionValue = 0.625 strDimensionValue = 0.6875 strDimensionValue = 0.75 strDimensionValue = 0.875 strDimensionValue = 1.0 OnSetChangeDimensionList1() d1 0.0469 GetFitValue m_nDrivingParaNumber ! 1 SetParameterList() GetConfigValue GetConfigValue OnSelchangeClearanceList OnSelchangeParameterList2 GetConfigValue GetPreviewParaValue GetPreviewParaValue() SetParameterList() End OnSetChangeDimensionList1() End GetFirstDimensionValue() End SetDimensionList() End GetDefaultParameter() End GetDefaultParameter GetPreviewParaName() GetPreviewParaValue() GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetPreviewParaValue() End GetPreviewParaName() End GetPreviewParaName RedrawWindow OnSetChangeType() End SetChangeUnit() End SetChangeVendorList() End OnSelchangeVendorList InitPM() End InitPM After Layout(). InitPM() InitData ReadUnit() D:Program FilesIMOLD V8stdejectorvendor.xls m_nVendorNumber 0 ReadUnit() End ReadUnit SetChangeVendorList() SetChangeUnit() ReadModel() ReadModel() End m_nModel != -1 OnSetChangeType() GetDefaultParameter() GetDimensionList GetDimensionList() strParameterName = d1BaseSketch strParameterName = d2BaseSketch strParameterName = KBaseSketch strParameterName = RBaseSketch strParameterName = HdClrHdClr strParameterName = offsetBodyClearanceSketch strParameterName = BdClrRevolveSketch strParameterName = base_lExtrudeSketch1 strParameterName = Key_LExtrudeSketch2 strParameterName = Key_WExtrudeSketch2 strParameterName = LBaseSketch GetDimensionList() SetDimensionList SetDimensionList() ShowDrivingDimension() ShowDrivingDimension() End GetFirstDimensionValue() GetColValue strDimensionValue = 0.0469 strDimensionValue = 0.0625 strDimensionValue = 0.0781 strDimensionValue = 0.0938 strDimensionValue = 0.1094 strDimensionValue = 0.125 strDimensionValue = 0.1406 strDimensionValue = 0.1563 strDimensionValue = 0.1719 strDimensionValue = 0.1875 strDimensionValue = 0.2031 strDimensionValue = 0.2188 strDimensionValue = 0.2344 strDimensionValue = 0.25 strDimensionValue = 0.2656 strDimensionValue = 0.2813 strDimensionValue = 0.2969 strDimensionValue = 0.3125 strDimensionValue = 0.3281 strDimensionValue = 0.3438 strDimensionValue = 0.3594 strDimensionValue = 0.375 strDimensionValue = 0.4063 strDimensionValue = 0.4375 strDimensionValue = 0.4688 strDimensionValue = 0.5 strDimensionValue = 0.5625 strDimensionValue = 0.625 strDimensionValue = 0.6875 strDimensionValue = 0.75 strDimensionValue = 0.875 strDimensionValue = 1.0 OnSetChangeDimensionList1() d1 0.0469 GetFitValue m_nDrivingParaNumber ! 1 SetParameterList() GetConfigValue GetConfigValue OnSelchangeClearanceList OnSelchangeParameterList2 GetConfigValue GetPreviewParaValue GetPreviewParaValue() SetParameterList() End OnSetChangeDimensionList1() End GetFirstDimensionValue() End SetDimensionList() End GetDefaultParameter() End GetDefaultParameter GetPreviewParaName() GetPreviewParaValue() GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetPreviewParaValue() End GetPreviewParaName() End GetPreviewParaName RedrawWindow OnSetChangeType() End SetChangeUnit() End SetChangeVendorList() End SetChangeVendorList CreateTempBody ReadCurrentUserRegistry SoftwareIMOLDMetricComponents DME GetDefaultVendor SetChangeVendorList() SetChangeUnit() ReadModel() ReadModel() End m_nModel != -1 OnSetChangeType() GetDefaultParameter() GetDimensionList GetDimensionList() strParameterName = d1BaseSketch strParameterName = d2BaseSketch strParameterName = KBaseSketch strParameterName = RBaseSketch strParameterName = HdClrHdClr strParameterName = offsetBodyClearanceSketch strParameterName = BdClrRevolveSketch strParameterName = base_lExtrudeSketch1 strParameterName = Key_LExtrudeSketch2 strParameterName = Key_WExtrudeSketch2 strParameterName = LBaseSketch GetDimensionList() SetDimensionList SetDimensionList() ShowDrivingDimension() ShowDrivingDimension() End GetFirstDimensionValue() GetColValue strDimensionValue = 0.0469 strDimensionValue = 0.0625 strDimensionValue = 0.0781 strDimensionValue = 0.0938 strDimensionValue = 0.1094 strDimensionValue = 0.125 strDimensionValue = 0.1406 strDimensionValue = 0.1563 strDimensionValue = 0.1719 strDimensionValue = 0.1875 strDimensionValue = 0.2031 strDimensionValue = 0.2188 strDimensionValue = 0.2344 strDimensionValue = 0.25 strDimensionValue = 0.2656 strDimensionValue = 0.2813 strDimensionValue = 0.2969 strDimensionValue = 0.3125 strDimensionValue = 0.3281 strDimensionValue = 0.3438 strDimensionValue = 0.3594 strDimensionValue = 0.375 strDimensionValue = 0.4063 strDimensionValue = 0.4375 strDimensionValue = 0.4688 strDimensionValue = 0.5 strDimensionValue = 0.5625 strDimensionValue = 0.625 strDimensionValue = 0.6875 strDimensionValue = 0.75 strDimensionValue = 0.875 strDimensionValue = 1.0 OnSetChangeDimensionList1() d1 0.0469 GetFitValue m_nDrivingParaNumber ! 1 SetParameterList() GetConfigValue GetConfigValue OnSelchangeClearanceList OnSelchangeParameterList2 GetConfigValue GetPreviewParaValue GetPreviewParaValue() SetParameterList() End OnSetChangeDimensionList1() End GetFirstDimensionValue() End SetDimensionList() End GetDefaultParameter() End GetDefaultParameter GetPreviewParaName() GetPreviewParaValue() GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetPreviewParaValue() End GetPreviewParaName() End GetPreviewParaName RedrawWindow OnSetChangeType() End SetChangeUnit() End SetChangeVendorList() End OnSelchangeVendorList InitPM() End After Show(). OnSetChangeDimensionList1() d1 0.1094 GetFitValue m_nDrivingParaNumber ! 1 SetParameterList() GetConfigValue GetConfigValue OnSelchangeClearanceList OnSelchangeParameterList2 GetConfigValue GetPreviewParaValue GetPreviewParaValue() GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetPreviewParaValue() End SetParameterList() End OnSetChangeDimensionList1() End OnSetChangeDimensionList1() d1 0.125 GetFitValue m_nDrivingParaNumber ! 1 SetParameterList() GetConfigValue GetConfigValue OnSelchangeClearanceList OnSelchangeParameterList2 GetConfigValue GetPreviewParaValue GetPreviewParaValue() GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetPreviewParaValue() End SetParameterList() End OnSetChangeDimensionList1() End OnSetChangeDimensionList1() d1 0.1406 GetFitValue m_nDrivingParaNumber ! 1 SetParameterList() GetConfigValue GetConfigValue OnSelchangeClearanceList OnSelchangeParameterList2 GetConfigValue GetPreviewParaValue GetPreviewParaValue() GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetViewValue() GetViewValue() End GetPreviewParaValue() End SetParameterList() End OnSetChangeDimensionList1() End nAssemblyType = 1 AddEjector() IsExistEjector() E:0017-.SLDASM = does not exist WriteAssemblyAttribute() Attribute pointer. Saveas file = E:0017-.SLDASM Activate file = E:0017-1 _.SLDASM Add component = E:0017-.SLDASM Activate file = E:0017-1 _.SLDASM IsExistEjector() End Activate file = E:0017-.SLDASM Open file = D:Program FilesIMOLD V8stdDMEInchEjectorPin TypeAEX.SLDPRT E:0017-_1.SLDPRT strFirstPartName = E:0017-_1.SLDPRT E:0017-_2.SLDPRT E:0017-_3.SLDPRT E:0017-_4.SLDPRT Activate file = E:0017-.SLDASM ReadMaterial CreateSketchPoint AddSketchConstraints AddSketchConstraints() Number of sketch points = 4 Get sketch point coordinates = 0 Select sketch point = 0 Select sketch point m_SelSketchPointindex = 0 SketchAddConstraints sgCOINCIDENT Get sketch point coordinates = 1 Select sketch point = 1 Select sketch point m_SelSketchPointindex = 1 SketchAddConstraints sgCOINCIDENT Get sketch point coordinates = 2 Select sketch point = 2 Select sketch point m_SelSketchPointindex = 2 SketchAddConstraints sgCOINCIDENT Get sketch point coordinates = 3 Select sketch point = 3 Select sketch point m_SelSketchPointindex = 3 SketchAddConstraints sgCOINCIDENT AddSketchConstraints() End Add in ejectors in ejector assembly. Activate file = E:0017-_1.SLDPRT Activate file = E:0017-_2.SLDPRT Activate file = E:0017-_3.SLDPRT Activate file = E:0017-_4.SLDPRT AddMateRelation 21:51:54, 13, 2012 - GetTopInformation() E:00EjectorProcedureFile.txt ReadResource E:0017-1 _.SLDASM 21:51:57, 13, 2012 - GetTopInformation() 21:51:57, 13, 2012 - GetImpressionInformation E:001 .SLDPRT E:0017-1 _.SLDPRT E:0017-1 _.SLDPRT 1 17-1 _ 17-1 _ 21:51:59, 13, 2012 - GetImpressionInformation 21:52:08, 13, 2012 - AfterClose Ejectors = 4 SolidTrim ejector = 0 17-117-1 _ 17-117-1 _/17-_2-117- 21:52:08, 13, 2012 - InsertCavity4 A 21:52:09, 13, 2012 - InsertCavity4 A End 21:52:09, 13, 2012 - ShowHideSolidBody2 21:52:09, 13, 2012 - Before EditRebuild3 21:52:09, 13, 2012 - After EditRebuild3 21:52:09, 13, 2012 - ShowHideSolidBody2 End SolidTrim ejector = 1 17-117-1 _/17-_1-117- 21:52:09, 13, 2012 - InsertCavity4 A 21:52:09, 13, 2012 - InsertCavity4 A End 21:52:09, 13
温馨提示:
1: 本站所有资源如无特殊说明，都需要本地电脑安装OFFICE2007和PDF阅读器。图纸软件为CAD,CAXA,PROE,UG,SolidWorks等.压缩文件请下载最新的WinRAR软件解压。
2: 本站的文档不包含任何第三方提供的附件图纸等，如果需要附件，请联系上传者。文件的所有权益归上传用户所有。
3.本站RAR压缩包中若带图纸，网页内容里面会有图纸预览，若没有图纸预览就没有图纸。
4. 未经权益所有人同意不得将文件中的内容挪作商业或盈利用途。
5. 人人文库网仅提供信息存储空间，仅对用户上传内容的表现方式做保护处理，对用户上传分享的文档内容本身不做任何修改或编辑，并不能对任何下载内容负责。
6. 下载文件中如有侵权或不适当内容，请与我们联系，我们立即纠正。
7. 本站不保证下载资源的准确性、安全性和完整性, 同时也不承担用户因使用这些下载资源对自己和他人造成任何形式的伤害或损失。
提示  人人文库网所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。
关于本文
本文标题：肥皂盒上盖的注塑模设计【全套含CAD图纸、三维、视频】
链接地址：https://www.renrendoc.com/p-12792938.html

官方联系方式

网站客服网站客服      侵权投诉侵权投诉
1:下载资料失败解决办法   
2:不支持迅雷下载,请使用浏览器下载   
3:不支持QQ浏览器下载,请用其他浏览器   
4:下载后的文档和图纸-无水印   
5:文档经过压缩，下载后原文更清晰   
点击下载此资源
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服 - 联系我们

网站客服QQ：2881952447     

copyright@ 2020-2025  renrendoc.com 人人文库版权所有   联系电话：400-852-1180

备案号:蜀ICP备2022000484号-2       经营许可证: 川B2-20220663       公网安备川公网安备: 51019002004831号

本站为文档C2C交易模式，即用户上传的文档直接被用户下载，本站只是中间服务平台，本站所有文档下载所得的收益归上传人(含作者)所有。人人文库网仅提供信息存储空间，仅对用户上传内容的表现方式做保护处理，对上载内容本身不做任何修改或编辑。若文档所含内容侵犯了您的版权或隐私，请立即通知人人文库网，我们立即给予删除！