常用软件介绍及安装viewdraw.ppt

Introduction To Normal Use Software zheng-ru-fu n1、Innoveda eProduct Designer 2.0- Viewdraw/ViewGen n2、 Hspui (Hspice) n3 、EditPlus Installation n1、 Innoveda eProduct Designer 2.0 and the use of viewdraw and ViewGen n2、Hspui U-2005.09(hspice) n3 、EditPlus Innoveda eProduct Designer Installation Put the .ISO file in the virtual CD- driver or Unzip and click ： then click Change your installation name if you like ,and then Change the destination address thenNext again thenNext again 选择： Design Exchange Analog Simulation Then installing After it completed ,choosing to configure EPD. then Choose to install the high speed design tools for its uselessness Configure the license Choose and then Enter the license from the former address: D:ePDLicense.data Finished the installation Set up the environment parameter The first opening Build a new project with the and then Carefully arrange the Adding model Find the needed software Installation n1、 Innoveda eProduct Designer 2.0 and the use of viewdraw and ViewGen n2、Hspui U-2005.09(hspice) n3 、EditPlus Hspice Installation nThe installation steps are just from the beginning of knocking on the setup file nUntil you meet : The hspice should also initialize the environment parameter just the same as Innoveda eProduct Designer 2.0.But they are conflicted with each other. hspice The solution is as follow: Copy the contents of license.dat of Hspice to license.dat of ePD. Or: use “;” between different License.dat Installation n1、 Innoveda eProduct Designer 2.0 and the use of viewdraw and ViewGen n2、Hspui U-2005.09(hspice) n3 、EditPlus The installation steps are also just from the beginning of knocking on the setup file nBut if you want to change the color of the fonts like this : exampleexample nThe solution is as follow: Change the color of the font sp;cir;lib;lis;txt ; Installation n1、 Innoveda eProduct Designer 2.0 and the use of viewdraw and ViewGen n2、Hspui U-2003.09(hspice) n3 、EditPlus Set up a new circuit Gen